*** Limited run of only 20 premium high-end cables made by Cables Online ***

 

Premium RG-6 QUAD shield cable offers direct RF connection between a NTSC TV tuner and ones videogame or computer system with no adapter needed

 

This cable was assembled in the USA by Cables Online using premium quality manufacturing techniques. Since this premium Gold Plated connector is hard to find for this QUAD Shield RG-6 cable, Cables Online was only able to make a limited run of 20 cables in lengths between 3 feet and 100 feet with cable color available in both white and black. This is the only RG-6 QUAD shield Gold plated F male to Gold plated RCA male connector on the market. This allows the ColecoVision and many other systems on the market to be directly connected to ones 75 ohm NTSC TV tuner without needing to use any type of adapter at the end of the cable. I noticed an improved signal to noise ratio with less humming in the audio with this new Cables Online RG-6 QUAD shield cable when compared to a Monoprice RG-6 brand cable that requires a adapter plug on the end. Because of the construction quality of this cable with no adapter needed and since it was assembled in the USA by a high-end manufacture, this cable is around 4.5 times the price of a typical RG-6 QUAD shield cable.

 

RG6 Quad-Shield Flame Retardant PVC CM Rated Jacket Coax Cable Specs

RG6U Quad Shield 3.0 GHz Coaxial Cable

18 AWG Solid Copper-Clad Steel Conductor

1st Shield - Aluminum Foil.
2nd Shield- Braid Shield
3rd Shield - Aluminum Foil.
4th Shield - Braid Shield.

Gas Injected Foam Polyethylene Insulation Dielectric
Flame Retardant PVC CM Rated Jacket
ETL Listed, RoHS Compliant

 

*** This high quality cable is available in lengths between 3 feet and 100 feet. We have verified that even the super long 100 feet cable offers a beautiful picture and sound quality when used on the ColecoVision, ADAM computer, ATARI 130XE, and Commodore 128 ***

 

 

This RF TV direct connection cable is 100% compatible with the following videogame and computer systems


Amiga 600 and Amiga 1200 (Also compatible with any Amiga computer that has the optional external Amiga 520 RF modulator video adapter installed on its RGB port ). 


ATARI 800XL, Atari 1200XL, Atari 65XE, and Atari 130XE


ATARI 520STM, ATARI 520STFM, ATARI 1040STFM, ATARI MEGA STE, and Atari Falcon 030. Well also work with any ATARI ST computer that has a (M) in the model number (Also works with some ATARI 520STE and ATARI 1040STE computers as long as there is an RF modulator female RCA jack on the computer case).


Atari 2600 Junior (ATARI 2600 Junior only, well not work with original ATARI 2600) 


ATARI 7800


ATARI XEGS


ATARI Jaguar


ColecoVision


Coleco ADAM Computer System


Coleco Gemini Video Game System


Commodore VIC-20 (Requires one to use the official Commodore VIC-20 external RF modulator) 


Commodore C16, C116, Plus/4, Commodore 64, and Commodore 128 computers


Intellivision


Intellivision II


Mattel Aquarius


NEC TurboGrafx-16


Nintendo Entertainment System (original 80's model with front-loading cartridge slot)


Nintendo Entertainment System (NES-101 the top loading model)


Super Nintendo


Sega Master System


Sega Master System 2


Sega Genesis


Spectravideo SVI-728


Spectravideo SVI-738


Also this product will work with any classic 70’s and 80’s videogame system that has a external RCA channel 2, 3, or 4 output jack on the outside of the console case.  However this high quality 18 gauge RG-6U cable will not work with some videogame and computer systems that have a internal RCA channel 2,3, and 4 output since the cable is too thick to be routed internally inside the videogame console. Therefore before ordering make sure your videogame and computer system has a physical RF channel 2,3, or 4 output jack where the cable can be connected to the outside of the console (videogame and computer systems where a physical RF cable runs inside to an internal RF output jack may not work with this product since the cable will be too thick). ****

 

 (We carry many different lengths of cables. When ordering a cable keep in mind that in the analog world the shorter the cable the better the picture and sound quality well be. Therefore, it is recommended not to order a cable that is longer then what you really need if the goal is to obtain the best picture and sound quality possible. Also the shorter the cable the less the cable will cost).

 

Many classic videogame and computer systems from the 70’s and 80’s only have a RF channel 2 and 3 or channel 3 and 4 output, and require this high quality cable Almost 100% of CRT TV's and flat panels will work with this cable with 75 ohm adapter (If the CRT TV was manufactured before the year 1990, then a 75ohm to 300ohm adapter might be required on some TV's manufactured in the 80's).