Description:
RUNNER series is the most advanced mppt controller with Touch Screen, combined with the second generation of high conversion efficiency, back-light LCD Touch Screen display, control mode, connect way, internal structure etc. features, also optimized the following points:
1.Increase all kinds of protection function to be used more reassuring.
2.Add the LOAD sampling to be used more clear of output load.
3.Wider PV Input voltage 150V
4. Reduce the static standby self-consumption, energy saving and more simply for small system.
Choose Runner, more intelligent in life!
Feature:
* High-efficient MPPT algorithm, MPPT efficiency ≥99.5%.
* Support Seal/Gel/Flooded battery and customized batteries.
* Four types of load mode selection: ON/OFF, PV voltage control, Dual Time control, PV+Time control.
* Current-limited charging function.
* High definition LCD display.
* Intelligent interaction experience.
* Support PC and APP (Android & iOS) monitoring.
* Dual RS485 communication ports, support for parallel communication.
* CE, RoHS, FCC certifications approved.
RUNNER Series |
RUNNER -40A |
RUNNER -50A |
RUNNER -60A |
||
Product Category |
Controller properties |
MPPT (Maximum power point tracking) |
|||
MPPT efficiency |
≥99.5% |
||||
Standby power |
0.5W~1.2W |
||||
System voltage |
12V/24V/36V/48V auto work |
||||
Heat-Dissipating method |
Fan-cooling |
||||
Input Characteristics |
Max.PV input voltage(Voc) |
DC150V |
|||
Start charge voltage point |
Battery voltage + 3V |
||||
Low input voltage protection point |
Battery voltage + 2V |
||||
PV rated power |
12V system |
520W |
650W |
780W |
|
24V system |
1040W |
1300W |
1560W |
||
36V system |
1560W |
1950W |
2340W |
||
48V system |
2080W |
2600W |
3120W |
||
Charge Characteristics |
Battery types (Default Gel battery) |
Gel battery, Sealed lead-acid battery, Flooded battery, User-defined |
|||
Charge rated current |
40A |
50A |
60A |
||
Charge method |
3 stages: CC (Constant current) - CV (Constant voltage) - CF (Floating charge) |
||||
LOAD Characteristics |
Load voltage |
Same as battery voltage |
|||
Load rated current |
30A |
||||
Load control mode |
On, Off , PV voltage control, Dual-time control, PV + Time control |
||||
Display & Communication |
Low voltage protection |
The default protection point is 10.5V, and it is restored to 11V (can be set) |
|||
Setup method |
PC software / Mobile APP / controller display |
||||
Display |
High-definition LCD segment code backlight display |
||||
Dry contact access voltage |
5V ~ 12V |
||||
Communication |
Dual RJ45 port / RS485 / support PC software monitoring /support WiFi module for APP cloud monitoring / support centralized parallel monitoring |
||||
Other Parameters |
Protections |
Input over / low voltage, output over / low voltage, reverse connection, over temperature, short circuit, battery shedding etc. |
|||
Operating ambient temperature |
-20℃~+50℃ |
||||
Storage temperature |
-40℃~+75℃ |
||||
IP(Ingress protection) |
IP21 |
||||
Max. Battery wire (mm2/AWG) |
30mm2 |
||||
Max. Load wire(mm2/AWG) |
30mm2 |
||||
Recommended breaker |
≥100A |
||||
Net weight (KG)/Gross weight (KG) |
2.15 / 3.05 |
||||
Product size (mm)/Packing size (mm) |
305×185×72 / 420×275×150 |
Notice:
1.
Our Runner MPPT Controller now can use with Mobile APP , you can buy
WIFI Modular with us to use with Mobile APP , if you need, please
contact with us .
2.If you want to connect PC/Laptop,you need to buy an RS485
communication cable.If there is no Communication cable,it`s only can be
work for AGM,Flooded,Sealed Batteries.
3.Please be sure your solar panel input voltage is higher than 18V when
you charge 12V battery , and your PV Input Votage more than 30V when
you charge 24V battery bank , and your PV Input Voltage more than 60V
when you charge 48V battery bank .
4.For this mppt solar charge controller , you need to connect with battery first , then connect with the solar panel . Because this solar charge controller , the power is supplied by the battery , so no matter day time or night time , if this solar charge controller is connected with battery , it will be on all the time when it is turn on .
5. If your battery is lithium battery , please tell us the work voltage range of your lithium battery , then we will adjust the voltage range of our MPPT Solar charge controller to meet the work voltage range of your lithium battery .
Package including:
1.1PCS MPPT solar charge controller
2.1PCS English User Manual
3.1PCS Temp. Sensor
4.2pcs Hang Bracket
SHIPPING :
We ship to international via FEDEX or DHL or TNT or UPS or EMS fast express shipping way .
Items are shipped within 1-4 business day after receive cleared payment.
FEEDBACK
Note:
Do not hesitate to talk with us anytime before and after the purchases,
we are committed to your 100% customer satisfaction.
I am here and ready to assist you with any question or concerns you might have before or after the purchase.
If
you have the problem with the power inverter, please talk with us first
with eBay message BEOFRE you open return request or file a dispute or
leave the netural or negative feedback.Any question will be replied
within 24 hours except the weekend and statuary holiday in Chinese
Beijing Time. If you contact us by other methods, there will be some
delay for answer.
My goal is to make sure you are happy and having the pleasant shopping with us.