eBay

Description

Product Overview

*HOSE CUTTER*
This high quality hose cutter provides a straight, even, clean cut on heater, air conditioning, braided rubber or for plastic hose up to 1-1/8" dia.

*VW SHIM WRENCH*
Designed to remove the rear hub when installing our 71520 and 71530 Series for Volkswagen shim. This wrench is a must in for assisting the installer when using these camber and toe shims.

*PITMAN ARM PULLER*
Designed to handle the toughest job, the 73119 is adjustable and has special forged jaws shaped to fit the job. Positive grip allows this tool to do many other pulling jobs.
*CAUTION:* Not for use with impact wrenches (air tools).

*HONDA CLEARANCE ARM SOCKET*
This special 10 point socket is needed when removing the O.E. rear lower control arm on new 2001 to for 2006 Honda Civics, 2003 and up Elements, 2002 to 2006 CRVs and 2002 to for 2007 Acura RSXs. Included with Part No. 69300 and 69400.

*EZ SHIM CUTTER*
This cutter, a must for properly cutting our patented EZ Shim, is a great tool for a variety of cutting needs. Its thin cutting blades help prevent breakage and waste.

*FRONT HUB & AXLE PULLER*
This puller removes front hubs on vehicles with independent front suspensions. Remove screw and use it with Flange Type Axle Puller to remove axles in compact cars.

*FLANGE TYPE AXLE PULLER*
Flange Type Axle Puller can be used as a regular wheel puller or hub puller, as well as a flange type puller. The bolt circle range is from 4-1/2" to 5-1/2", which covers all cars and small trucks with flange type axles. The four slots allow this tool to be used on 4, 5, or 6 stud designs.

*CV JOINT FORK*
When used with the Flange Type Axle Puller, this tool will pull most CV joints that use a hidden snap ring to hold them in the transaxle. Made to remove the axle assembly without damaging the transmission case or inside roller bearing.

*COOL TOOL FLUID*
This fluid lubricates the 85125 Rotary File Set, and the 68670 Rotor-Bor to reduce stress on the cutting teeth. This product is highly recommended to prolong the life of all cutting bits used on steel.

*WHEEL SPREADER*
Take the play out of front wheels during alignment!
Place this spring-loaded pressure bar between the
tires to assure a more accurate alignment. A must for Mercedes vehicles.

*BRAKE PEDAL DEPRESSOR*
An adjustable steel plate extends the length of the bar to put constant pressure on the brake pedal.

*STEERING WHEEL HOLDER*
A must for proper alignments. This tool securely holds the steering wheel and covered hooks and base prevent damage to the steering wheel or seat.

*TURNTABLES*
99750 is full floating with enclosed ball bearings. Large, easy to read dial is quickly adjusted to zero. Ideal for racks, pits, floor units or stands.

*AFRONT WHEEL STANDS*
Made of heavy gauge steel, these portable stands will enable the wheel alignment mechanic to perform alignments without an alignment rack. Designed to be used with 99750 turntables (optional). All legs
have leveling adjustments. Sold in pairs.

*REAR WHEEL STANDS WITH SLIP PLATES*
Portable stands allow technicians to perform alignments without an alignment rack. Use with 99884 Front Wheel Stands, all legs have leveling adjusters. Sold in pairs.

*REAR SLIP PLATES*
With a total height of only 3/8", these low-profile slip plates allow a 2 inch total movement of the rear wheel while for adjusting camber and toe. Sold in pairs.

*TOE BAR WITH SCRIBE*
Gives toe readings (in 1/32 of an inch increments) by measuring distances between marks scribed at the center of the tire treads. Comes with 8 ft. bar, 11 in. pointers, 5 in. stands, and 99516 scribe.

*SCRIBE ASSEMBLY*
This scribe is ideal for use with any style of toe measuring bar.

*RADIAL RUN-OUT GAUGE*
The Universal Radial Run-Out Gauge displays exact measurements for tire, wheeel, and disc brake run-out. This gauge also measures ball joint and tie rod play and adjusts height to adapt to both auto and heavy truck applications. This is a great tool when measuring those hard to reach areas. Please refer to the Specialty Products Wheel Alignment Specification Book for ball joint specifications.

*CAM EXTRACTOR PRESS TOOL*
Use this press tool to remove OE cam sleeves from for Toyota trucks. The extended length forcing screw allows you to remove the sleeve without removing the steering rack. Recommend when installing our 25430, 25435 and 25440 replacement for Toyota cams.

_Note: In some cases the tubes may be solidly corroded in place and even the Cam Extractor may not be able to break them free._

Product Information

PartNumber	spc87530
Description	VW REAR SHIM WRENCH

Product Fitment

for 2000-2006 Audi TT Base L4.1781cc

for 2006-2007 Volkswagen Beetle 2.5 L5.2480cc

for 1998 Volkswagen Beetle Base L4.1984cc

for 2009-2010 Volkswagen Beetle Base L5.2480cc

for 1999-2003 Volkswagen Beetle GL L4.1781cc

for 1999-2004 Volkswagen Beetle GL L4.1896cc

for 1999-2005 Volkswagen Beetle GL L4.1984cc

for 1999-2005 Volkswagen Beetle GLS L4.1781cc

for 1999-2004 Volkswagen Beetle GLS L4.1896cc

for 1999-2005 Volkswagen Beetle GLS L4.1984cc

for 2005 Volkswagen Beetle GLS TDI L4.1896cc

for 1999-2004 Volkswagen Beetle GLX L4.1781cc

for 2008 Volkswagen Beetle S L5.2480cc

for 2008 Volkswagen Beetle SE L5.2480cc

for 2001-2002 Volkswagen Beetle Sport L4.1781cc

for 2001-2002 Volkswagen Beetle Sport L4.1896cc

for 2001-2002 Volkswagen Beetle Sport L4.1984cc

for 1998 Volkswagen Beetle TDI L4.1896cc

for 2006 Volkswagen Beetle TDI L4.1896cc

for 2002-2004 Volkswagen Beetle Turbo S L4.1781cc

for 1999-2003 Volkswagen Golf GL L4.1896cc

for 1999-2006 Volkswagen Golf GL L4.1984cc

for 2004 Volkswagen Golf GL TDI L4.1896cc

for 2000-2001 Volkswagen Golf GLS L4.1781cc

for 2000-2003 Volkswagen Golf GLS L4.1896cc

for 1999-2006 Volkswagen Golf GLS L4.1984cc

for 2004 Volkswagen Golf GLS TDI L4.1896cc

for 2006 Volkswagen Golf GLS TDI L4.1896cc

for 1999 Volkswagen Golf GTI L4.1984cc

for 1999 Volkswagen Golf GTI V6.2792cc

for 2002-2006 Volkswagen Golf GTI 1.8T L4.1781cc

for 2003 Volkswagen Golf GTI 20th Anniversary L4.1781cc

for 2002 Volkswagen Golf GTI 337 L4.1781cc

for 2000-2001 Volkswagen Golf GTI GLS L4.1781cc

for 2000 Volkswagen Golf GTI GLS L4.1984cc

for 2000-2001 Volkswagen Golf GTI GLX V6.2792cc

for 2002-2005 Volkswagen Golf GTI VR6 V6.2792cc

for 1999 Volkswagen Golf TDI L4.1896cc

for 2005 Volkswagen Golf TDI L4.1896cc

for 1999 Volkswagen Golf Wolfsburg Edition L4.1984cc

for 2006 Volkswagen GTI Base L4.1984cc

for 2005 Volkswagen Jetta 2.5 L5.2480cc

for 2003-2005 Volkswagen Jetta GL L4.1781cc

for 1999-2005 Volkswagen Jetta GL L4.1984cc

for 2005 Volkswagen Jetta GL TDI L4.1896cc

for 2004-2005 Volkswagen Jetta GLI L4.1781cc

for 2002-2004 Volkswagen Jetta GLI V6.2792cc

for 2000-2005 Volkswagen Jetta GLS L4.1781cc

for 1999-2005 Volkswagen Jetta GLS L4.1984cc

for 1999-2002 Volkswagen Jetta GLS V6.2792cc

for 2005 Volkswagen Jetta GLS TDI L4.1896cc

for 1999-2003 Volkswagen Jetta GLX V6.2792cc

for 1999-2005 Volkswagen Jetta TDI L4.1896cc

for 2001 Volkswagen Jetta Wolfsburg Edition L4.1781cc

for 2003 Volkswagen Jetta Wolfsburg Edition L4.1781cc

for 1999 Volkswagen Jetta Wolfsburg Edition L4.1984cc

Shipping Details

Free shipping applies only within the Contiguous 48 States in the United States. Contact us directly for a quote if shipping is needed elsewhere.

For customer outside of the US. Import duties, taxes, and fees aren't included in the item's price or shipping costs. The buyer is responsible for paying for any import fees. Check with your country's customs office to find out what these additional charges will be before you bid or buy.

We utilize USPS, FedEx and UPS for outbound international shipments. If you have a preference in regards to which shipping company we utilize to fulfill your order please make note of it with your payment or in a follow up email. For example, Canadian customers generally prefer USPS as we have heard that FedEx charges additional brokerage fees. On the other hand, many customers from the United Kingdom prefer FedEx as there are no additional fees and they receive their packages significantly faster than those shipped via USPS. Please feel free to contact us for additional information.

Payment Details

8% California Tax will apply to all orders shipping to California.

Paypal and all major credit cards are accepted.

Important Note for International Buyers

All automotive products sold are for use in the United States (USDM) market only. We cannot guarantee fitment for overseas and international vehicles. Please research prior to purchase to ensure compatibility as we will not be responsible for shipping refunds on orders with these issues.

Return Policy

Returns must be in brand new in box, sealed condition in order to qualify for a return.

Returns are valid within 30 days of the delivery date.

20% restocking fees apply only on valid returns.

Terms And Conditions

All defects/warranty is handled directly with the Manufacturer and not the retailer. If you need help finding contact information or seeking help on the process we can offer that.