The all-new Genius Series from NOCO features a complete charger redesign with more power and more performance. The GENIUS series features up to 45% more power output with a 40% size reduction.
Charger Specs:
- Input Voltage: 120-240 VAC
- Output Power: 150W
- Charging Current: 10A
- Low-Voltage Detection: 1 Volt
- Back Current Drain: <0.5mA
- Ambient Temperature: -20C to +40C
- Battery Voltage Supported: 6V, 12V
- Battery Chemistries: Wet, GEL, MF, CA, EFB, AGM, Calcium, Lithium
- Battery Capacity - 20AH to 230AH
- Housing Protection: IP65
- Cooling: Natural Convection
- Dimensions (LxWxH): 7.1 x 3.6 x 2.3
- Weight: 3.33 LBS
Charger Features:
- Universal Input - 120-240 VAC
- Dynamic Battery Tracking
- High-Efficiency Design
- Charge Down to Zero Volts
- Built-in Supply Mode
- Advanced Battery Diagnostics
- Thermal Compensation
- Built-in Auto Desulfation
- Wall Mounting Options
- Redesigned Battery Clamps
Charge Down to Zero Volts
From partially drained batteries to completely dead batteries, we changed everything. An improved start-voltage sensor now detects dead batteries as low as 1-Volt. Genius also has all-new force mode which allows manual charging for extremely dead batteries - all the way down to zero volts.
In Force Mode, the charger will run a 5-minute charge cycle to bring the battery back to life. The charge LEDs will chase, and the selected mode will blink. After the 5 minute cycle, the NOCO GENIUS10 will initiate standard charging.
Do More With One Charger
A multi-functional design allows you to charge in more ways. Effortlessly charge multiple battery voltages and chemistries. Switch to Repair Mode to recover old batteries or prime a new one. Use Supply Mode for ECU reprogramming, powering onboard computer systems during battery changing, or power 12-volt devices.
Simple Troubleshooting With Advanced Diagnostics
Smart indicators quickly detect when the battery charger is connected in reverse polarity, connected to an incompatible battery, or if the battery is failing. The NOCO GENIUS10 charger is also able to tell if the battery will not hold a charge, if the internal battery temperature is too high. or if the ambient temperature is too cold.
Thermal Compensation - Optimized For Any Climate
Elevates charging to a whole new level of performance by dynamically altering each charge based on the ambient temperature and providing a more accurate recharge.
Completely Automatic
Finally a charger from start to finish that's completely automatic. No special modes and no technical knowledge required. The GENIUS10 charger will safely charge any battery, detect damaged batteries, intuitively repair them, actively monitor for long-term battery maintenance and extend battery life.
STORE || CHARGERS || ACCESSORIES
The all-new Genius Series from NOCO features a complete charger redesign with more power and more performance. The GENIUS series features up to 45% more power output with a 40% size reduction.
Charger Specs:
- Input Voltage: 120-240 VAC
- Output Power: 150W
- Charging Current: 10A
- Low-Voltage Detection: 1 Volt
- Back Current Drain: <0.5mA
- Ambient Temperature: -20C to +40C
- Battery Voltage Supported: 6V, 12V
- Battery Chemistries: Wet, GEL, MF, CA, EFB, AGM, Calcium, Lithium
- Battery Capacity - 20AH to 230AH
- Housing Protection: IP65
- Cooling: Natural Convection
- Dimensions (LxWxH): 7.1 x 3.6 x 2.3
- Weight: 3.33 LBS
Charger Features:
- Universal Input - 120-240 VAC
- Dynamic Battery Tracking
- High-Efficiency Design
- Charge Down to Zero Volts
- Built-in Supply Mode
- Advanced Battery Diagnostics
- Thermal Compensation
- Built-in Auto Desulfation
- Wall Mounting Options
- Redesigned Battery Clamps
Charge Down to Zero Volts
From partially drained batteries to completely dead batteries, we changed everything. An improved start-voltage sensor now detects dead batteries as low as 1-Volt. Genius also has all-new force mode which allows manual charging for extremely dead batteries - all the way down to zero volts.
In Force Mode, the charger will run a 5-minute charge cycle to bring the battery back to life. The charge LEDs will chase, and the selected mode will blink. After the 5 minute cycle, the NOCO GENIUS10 will initiate standard charging.
Do More With One Charger
A multi-functional design allows you to charge in more ways. Effortlessly charge multiple battery voltages and chemistries. Switch to Repair Mode to recover old batteries or prime a new one. Use Supply Mode for ECU reprogramming, powering onboard computer systems during battery changing, or power 12-volt devices.
Simple Troubleshooting With Advanced Diagnostics
Smart indicators quickly detect when the battery charger is connected in reverse polarity, connected to an incompatible battery, or if the battery is failing. The NOCO GENIUS10 charger is also able to tell if the battery will not hold a charge, if the internal battery temperature is too high. or if the ambient temperature is too cold.
Thermal Compensation - Optimized For Any Climate
Elevates charging to a whole new level of performance by dynamically altering each charge based on the ambient temperature and providing a more accurate recharge.
Completely Automatic
Finally a charger from start to finish that's completely automatic. No special modes and no technical knowledge required. The GENIUS10 charger will safely charge any battery, detect damaged batteries, intuitively repair them, actively monitor for long-term battery maintenance and extend battery life.
We accept PayPal, Visa, MC, AMEX, and Discover.
Shipping is specific to each of our listings, please view the top of the page for this items shipping method. We primarily ship out via UPS ground and USPS priority mail service. Once the label has been created for your order a tracking number will be uploaded to the eBay platform for full tracking visibility. If your address does not accept USPS packages please let us know in your order comments to ensure we get your package delivered.
We accept returned items purchased directly through High-Tech Battery Solutions, Inc. within 30 days of delivery. To return a product, customers must request a Return Authorization Form from a High-Tech Battery Solutions representative or go through the eBay returns system. Refunds are not guaranteed on Items returned without the correct documentation.
