Medidas: 11 cm aprox. (en su lado mas grande)
(Mas
medidas disponibles. Consultar)
Se
envia con instrucciones para su correcta aplicacion.
SIZESSize: 11 cm approx. (on its largest side)
(More sizes available. Consult us)
It is sent with instructions for its correct application.
Pegatinas de alta calidad
fabricadas en vinilo de corte , resistente a los lavados e inclemencias
meteorológicas.
Las pegatinas no llevan ningún fondo, por lo que una
vez aplicada queda el diseño elegido sobre la superficie que se ha
colocado.
NO EXISTEN PARTES TRANSPARENTES DE VINILO
Se entrega preparada con film transportador
para facilitar la colocación.
Se puede colocar en superficies lisas como
cristal, metal, plástico, carrocerías, carenados, paredes lisas,...
CONSÚLTANOS SI DESEAS UNA MEDIDA PERSONALIZADA
FEATURES
High quality stickers made of cut vinyl, resistant to washing and weather.
The stickers do not have any background, so once applied the chosen design remains on the surface that has been placed.
TRANSPARENT VINYL PARTS DO NOT EXIST
It is delivered prepared with conveyor film to facilitate placement.
It can be placed on smooth surfaces such as glass, metal, plastic, bodies, fairings, smooth walls, ...
CONSULT US IF YOU WANT A PERSONALIZED SIZE
El tiempo máximo de manipulación del
artículo es de 2 días laborables a partir de la recepción del
pago.
Los envíos GRATUITOS se realizan mediante correo
ordinario y NO llevan número de seguimiento.
El plazo previsto de entrega en España
suele ser de 2 a 5 días laborables dependiendo de la zona geográfica.
EN CASO DE DEMORA EN LA ENTREGA, POR FAVOR,
PONTE EN CONTACTO CON NOSOTROS
PARA SOLUCIONAR LA INCIDENCIA LO ANTES POSIBLE
SHIPPING
The maximum handling time of the item is 2 working days from receipt of payment.
FREE shipments are made by regular mail and do NOT have a tracking number.
The expected delivery time in Europe is usually 4 to 7 working days depending on the geographical area.
IN CASE OF DELAY IN DELIVERY, PLEASE CONTACT US
TO SOLVE THE INCIDENCE AS SOON AS POSSIBLE
La pegatina se compone de tres capas superpuestas unas sobre otras.
La primera capa que vemos es una lámina transparente / translúcida llamada transportador, debajo de ésta se encuentra el vinilo (la pegatina), y en último lugar está el papel protector.
1.- Limpiar la superficie donde se quiera poner la pegatina para eliminar restos de suciedad.
2. Retirar la base inferior (papel protector) con cuidado de que se quede pegado en el transportador transparente toda la pegatina.
En caso de que alguna parte se quede en el papel protector, volver a colocarlo en su posición inicial y apretar esa parte con los dedos o una tarjeta de plástico para asegurar que todas las partes de la pegatina se queden pegadas al transportador
3. Colocar la pegatina con el transportador en la zona deseada.
4. Aplicar presión sobre todo el papel transportador para asegurarse que la pegatina se queda bien adherida a la superficie elegida (con una tarjeta de plástico por ejemplo)
5. Retirar el papel transportador lentamente, empezando por una esquina, y tirando lentamente lo más pegado a la superficie donde se ha aplicado el vinilo.
INSTALLATION
The sticker consists of three layers superimposed on each other.
The first layer we see is a transparent / translucent sheet called a conveyor, below it is the vinyl (the sticker), and lastly is the protective paper.
1.- Clean the surface where you want to put the sticker to remove dirt.
2. Remove the bottom base (protective paper) taking care that the entire sticker is stuck on the transparent conveyor.
If any part remains in the protective paper, return it to its initial position and squeeze that part with your fingers or a plastic card to ensure that all parts of the sticker remain attached to the conveyor
3. Place the sticker with the conveyor in the desired area.
4. Apply pressure on all the conveyor paper to ensure that the sticker stays well attached to the chosen surface (with a plastic card for example)
5. Remove the conveyor paper slowly, starting at a corner, and slowly pulling the most glued to the surface where the vinyl has been applied.
Las
devoluciones deberán hacerse antes de 14 días tras
su recepción.
IMPORTANTE:
NO SE ACEPTARÁN DEVOLUCIONES DE
PEDIDOS CON MEDIDAS ESPECIALES, CON NOMBRES PERSONALIZADOS, O QUE HAYAN
SIDO MANIPULADOS.
No
nos hacemos responsables del mal uso, o la inadecuada instalación y
colocación por parte del comprador,
ya que para su correcta
aplicación no es necesario ningún tipo de experiencia previa.
El comprador se
hará cargo de los gastos de envío de las devoluciones. Será reembolsado
el importe de la compra, exluyendo los gastos de envío.
RETURNS
Returns must be made within 14 days after receipt.
IMPORTANT: RETURNS OF
ORDERS WITH SPECIAL MEASURES, WITH PERSONALIZED NAMES, OR THAT HAVE BEEN HANDLED.
We are not responsible for the misuse, or improper installation and placement by the buyer,
since for its correct application no previous experience is necessary.
The buyer will be responsible for the return shipping costs. The purchase amount will be refunded, excluding shipping costs.