XBee S2 USB Adapter Bluetooth Bee FT232RL Shield Wireless Controller For Arduino

Description:pls check the pictures and descriptions of each select carefully before purchase)

Mini USB Cable

100% Brand New.
USB 2.0 Male A to Mini B 5-pin cable.
Allows you to transfer images and data between your cell phone, MP3,PDA, GPS systems to computer.
Up to 480 Mbps data transfer rate.
Hot-swappable cable.
Plug and Play.
Cable Length: 30cm
Color: Blue
Package Included:
1PC*USB Cable


XBee S2 Wireless Module

This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you update the firmware through X-CTU.
Note: Series 1 and Series 2 XBee modules have the same pin-out. However, Series 1 modules cannot communicate with Series 2 modules.
3.3V @ 40mA
250kbps Max data rate
2mW output (+3dBm)
400ft (120m) range
Built-in antenna
Fully FCC certified
6 10-bit ADC input pins
8 digital IO pins
128-bit encryption
Local or over-air configuration
AT or API command set
Datasheet and document: please visit digi website
Package Included:
1PC*XBee 2mW Wire Antenna


XBee V03 Shield

Bee Adapter is a compact USB to serial adapter equipped with BEE (20pin 2.0mm) sockets. With integrated FT232RL IC, It can be used for programming or communicating with board which basic Arduino but without USB interface, like Sniffer Nano. On the other hand, you may connect your PC to various wireless applications via the BEE compatible modules.
The Adapter also could support XBee interface.
3.3V and 5V dual power output
3.3V and 5V IO compatible
USB 2.0 protocol
BitBang mode ready
Easily connected to a PC via mini USB cable
XBee-setting support software X-CTU
Usage 1: PC via a USB cable directly connected with XBee adapters
Usage 2: Bluetooth Bee configure or use as a data-transmission
Uses 3: ARDUINO BOARD PRO MINI Downloader
Package Included:
1PC*Bluetooth XBee Shield V03 Module Wireless Control For XBee ZigBee Arduino
USB XBee Bluetooth Adapter(FT232RL)

Bee Adapter is a compact USB to serial adapter equipped with BEE (20pin 2.0mm) sockets. With integrated FT232RL IC,
It can be used for programming or communicating with board which basic Arduino but without USB interface, like Sniffer Nano.
On the other hand, you may connect your PC to various wireless applications via the BEE compatible modules.
The Adapter also could support XBee interface.
 Specification
3.3V and 5V dual power output
3.3V and 5V IO compatible
USB 2.0 protocol
BitBang mode ready
Easily connected to a PC via mini USB cable
XBee-setting support software X-CTU
Usage 1: PC via a USB cable directly connected with XBee adapters
Usage 2: Bluetooth Bee configure or use as a data-transmission
Uses 3: ARDUINO BOARD PRO MINI Downloader
Documents: Schematic
Package Included:
1PC*Arduino BTBee/Bluetooth Bee USB to Serial port Adapter FT232RL Compatible Xbee


XBee Adapter(No chips)

This is a simple breakout board for the popular XBee product from Digi.
This board breaks out all 20 pins of the XBee to a 0.1" standard spacing dual row header .
The spacing between 0.1" header is 0.5"making it breadboard friendly.
 We highly recommend using femle sockets to
 avoid having to solder the XBee permanently to the breakout board .
 Package Included:
1PC*XBee Adapter Shield Breakout Board For XBee Module

Domestic
We believe you need to get your purchases as quick as possible. As a general rule your item will be shipped within 24 hours of you purchasing it. We pack and post from Tuesday to Sunday (Mondays we are closed) but definitely get all our mail off to the post office first thing Monday morning for you. Mail gets picked up at 12pm so chances are if you buy before lunchtime your item will leave the same day.

International
Same as above but understand that depending on what part of the world you are from it does take a little longer to send, delivery can be from 7-15 working days. Also other factors to take into consideration are quarantine and customs regulations in your country. It is also a consideration that customs duties and GST/VAT may be payable at the buyers expense.

Combined Postage (for items with shipping charges):
We are more than happy to combine postage, just use the Buy it Now function in eBay (but DO NOT PAY after purchasing each item) to buy all the products you need, when you have finished request a combined invoice, we will base the shipping cost on the size, weight and your location.

* When you satisfied with our product and services please leave us positive feedback.

* If you have got the package, please confirm "Delivery on time" For us.

* If a problem occurs, contact us immediately with any email request.

* Just contact us using the " Ask the seller a question" link on eBay.

Your Satisfaction is our Priority. Our goal is to make all our customers as happy as possible while shopping with us.

 

  For anything problem about product, price, shipping or order status, pleasecontact us via eBay message.Just contact us using the " Ask the seller a question" link on eBay.
  We expect positive feedback and 5 scores DSR  from you. 

  1. We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
  2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund to you after the returned item arrived at our warehouse.
  3.  Please include your eBay ID and item number with any email requests.

 

DataCaciques