Also for Raymarine C70 C80 C120, E80 E120, (A60 A65 old models only),
But no other model !!
This will come wired up, just plug into your plotter's NMEA socket as shown in above photo
and connect to power, 12/24 Volts using the included red and black wires
Use the 2 x output wires to send data / position to your DSC / VHF radio or other chartplotter
Buy this instead of an original Raymarine Raystar GPS receiver,
which will cost you over £300, as you will need an expensive adapter cable to go with it.
Your chartplotter's system will convert all the NMEA data that this receiver transmits into Seatalk data.
Supplied with NMEA 0183 input / output cable ( Part number R08004 4579-017-A ) all wired up for Raymarine C70 Chartplotter.
Simply plug in and power up
You have to connect to power as there is no voltage supply at your NMEA socket
Brand new, highly accurate and waterproof gps receiver.
approximately 10 metre cable
12/24 Volt
OUTPUTS COG AND SOG
Accurate to 2 metres
2 Year warranty
Transmits NMEA 0183 data: GGA，GLL，GSA，GSV，VTG，RMC
Better quality than original Raymarine gps receivers
call us on07540894166 for advice.
tracked worldwide shipping.
Be aware of your country's customs delay which we are not responsible for.
Please contact your mail company with the tracking number which you will find in your ebay / purchases.
You cannot ask to get a refund while still in transit from the UK.
Built-in patch antenna
Fast TTFF ( time-to-first-fix ) and low power
consumption
On-board rechargeable battery sustained Real-Time
Clock and control parameters memory
for fast satellite acquisition during power-up.
Automatic cold start without user reset.
Interference filter to major
VHF channels of marine radar
DIFFERENTIAL GPS
RECEIVER, WAAS compliant with EGNOS support (DGPS)
WAAS / EGNOS / MSAS automatic switching
High EMI immunity
Input power voltage DC 9 volt to 34 volt from boat battery
Protected against reverse polarity voltage.
Used in cruiser / yacht / fishing boat
Magnetic Declination compensation