GSP-6G-TDE

  • Glycol Bottle Buffered Probe - Avoid inaccurate temperature value caused by frequent door openings. With a wide measurement range temperature -40℉ to 185℉, humidity 10%~99%RH 
  • Designed for vaccine storage - Meets current CDC / VFC requirements and additional recommendations for vaccine storage and monitoring, FDA 21 CFR Part 11 Compliant 
  • Why Elitech - Focus on the research and development of life science and food cold chain full-process data visualization products. Applied in vaccines, nucleic acid detection, IVD, blood products,hospital pharmacies, CDC, cold chain logistics, warehouse management and other fields 
  • Easy to install - Built-in magnet, can be directly adsorbed refrigerator fixed. The benefit of the separable probe is that the probe no longer needs to be precooling after each time the device is moved 
  • Battery & USB Dual Power - Power on USB Port when battery is flat Value Visibility - Current temperature and MAX MIN value can be obtained from the large LCD screen.

 

Temp Range -40°C~+85°C (-40°F~185°F)
Temp Accuracy ±0.5°C/±0.9°F (-20°C~+40°C), +1°C/±1.8°F (others)
Resolution 0.1°C/°F; 0.1%RH
Memory Maximum Maximum 16,000 points
Logging Interval 10 seconds to 24 hours
Data Interface Micro USB
Software ElitechLog, for macOS & Windows system
Report Format PDF/EXCEL/TXT*via ElitechLog software (TXT for Windows ONLY.)
Power supply Single-use 3.6V ER14505 lithium battery; Or powered via USB
Battery life Two years at room temperature with 15 minutes record interval and buzzer alarm disabled.
Certification EN12830, CE, RoHS
Dimensions 118x61.5x19 mm
Logging Mode Stop when full; Circular logging
Alarm Configuration Buzzer; LCD display
 
  1.  
 
 
 
 
  1.  
    GSP-6G-TDE
    GSP-6G-TDE
    gsp-6
    GSP-6
    gsp-6
    GSP-6 ISO Certified
    GSP-6G
    GSP-6G ISO Certified
    GSP-6-PTE
    GSP-6-PTE
    Certified by Factory Factory ISO 17025 ISO 17025 Factory
    Sensor Type T(Glycol Bottle)*2 Temp+Humi Temp+Humi T(Glycol Bottle)+ H T(Ultra-Low)+ H
    Temperature Logging ✔ ✔ ✔ ✔ ✔
    Humidity Logging ✔ ✔ ✔ ✔ ✔
    Temperature Range(℃) -40～85℃ -40～85℃ -40～85℃ -40～85℃ -85~150℃
    Temperature Range(℉) -40～185℉ -40～185℉ -40～185℉ -40～185℉ -121~302℉
    Humidity Range Need edition via software 10%～99%RH 10%～99%RH 10%～99%RH 10%～99%RH
    Record Capacity 16,000 points 16,000 points 16,000 points 16,000 points 16,000 points
    Data Export ✔ ✔ ✔ ✔ ✔
    Logging Interval 10s ~ 24h 10s ~ 24h 10s ~ 24h 10s ~ 24h 10s ~ 24h
    Response Time 10s 10s 10s 10s 10s
    Protection Class IP64 IP64 IP64 IP64 IP64
  2. Q&A
  3.  

  4. How to use the data logger for the first time?

    1. Install Elitechlog software. Insert the device into a computer USB port.

    2. Click ""set parameter"" and then click ""save parameter"" to exit.

    3. Press and hold the left button for more than 4 seconds to start recording.

  5.  

  6. How to Reset & Reuse the Logger？

    Click "Quick Reset" to reset the original parameters settings. Disconnect the device from your computer to start using it again.

    Note: Please read and save the historical data before parameter settings or the data will be clear.

  7.  

  8. How to clear the recorded data？

    The recorded data can be cleared by the data management software by setting parameters.

  9.  

  10. How to obtain recorded data?

    1. Plug the data logger to a computer USB port, the icon will light in the screenafter connection.The green LED indicator will light at the same time.

    2. Open the data management software, the data logger will connectautomatically and upload data.

 
data logger
Independent R&D
  1.  
  2.  

ase read and save the historical data before parameter settings or the data will be clear

 

 

PushAuction