XYZ Da Vinci Cartridge Counter Filament Resetter Reset Tool 3D Printer NEW 240m

 Not for XYZ Mini 

I took a guess at it last night and put it on D7 and it worked. This was exactly what I was looking for. It works GREAT! Just for your info, my software is version 2.1.24.2 and the printer is a di vinci 1.0Aio version 1.2.4 I have not been connected to the internet while connected to the printer or using the software. Thanks for the reply and a great product. 

New message from: rongiu_0 (0)

Thanks again for such a quick response. I discovered this morning that there were a couple of little pieces of filament on the bottom of the cartridge container so that the chip on the cartridge couldn't communicate with the printer board. So I got the message "no cartridge". cleaned it out and now it shows "240 left; 240 capacity".


New message from: johnnykust666

Hello,
I am happy to say the Re-setter works now! I un plunged the USB from computer to printer. Then I used a different computer not connected to the internet, to connect the Re-setter device. I was able to reset 2 filament cartridges to 240 meter. Thank you!!!

XYZ filament cost too much now. so I can use much lower price material to print with and it prints vary well!.

From: mguestu02

Subject: Re: I have a question about using my item or I want to send the seller a message: mguestu02 sent a message about XYZ Printing da Vinci Filament Cartridge Counter Resetter Reset Tool #163075302642
Sent Date: Jul-12-18 15:23:45 PDT




That was it, had to disconnect the internet connection on my computer. Thank you! Absolutely fantastic little device too!

- mguestu02



To: mguestu02
Subject: Re: I have a question about using my item or I want to send the seller a message: mguestu02 sent a message about XYZ Printing da Vinci Filament Cartridge Counter Resetter Reset Tool #163075302642
Sent Date: Jul-12-18 10:03:49 PDT

Dear mguestu02,

Does the reseter keep flash led when power on ? try disconnect internet connection of the printer and then try reset Cartridge again and make sure when you put back Cartridge to printer and use the panel to check the Cartridge status and see if there is 240mm. when you print, does not connect to internet so XYZ solftware will not check your Cartridge online.

i had this problem before and this is how i fix. NO INTERNET when use XYZ software. 

another way to fix this is purchase new xyz Cartridge and then make sure no internet talking with xyz software.

any other problem let me know my friend !




From: mguestu02

Subject: I have a question about using my item or I want to send the seller a message: mguestu02 sent a message about XYZ Printing da Vinci Filament Cartridge Counter Resetter Reset Tool #163075302642
Sent Date: Jul-12-18 04:09:04 PDT



This worked great the first time I had to reset a cartridge, but no longer seems to be working. My printer keeps coming up with "Unidentified Cartridge", and won't print anything. Any advice/ideas?

- mguestu02



From: tnewb4
To: 777machi
Subject: Re: tnewb4 has sent a question about item #152982104365, ending on May-13-18 07:59:33 PDT - XYZ Printing da Vinci Filament Cartridge Counter Resetter Reset Tool
Sent Date: May-11-18 12:36:06 PDT



Ok just wanted to let you know that it works on my fimware for future business.thanks

- tnewb4
From: tnewb4

Subject: tnewb4 has sent a question about item #152982104365, ending on May-13-18 07:59:33 PDT - XYZ Printing da Vinci Filament Cartridge Counter Resetter Reset Tool
Sent Date: Apr-27-18 06:44:21 PDT



Will this work on 1.2.0 version?

- tnewb4

See My 25 Proof Photos down below how it works for me and print as much as i want !! 

Feel ^_____________^.......... every day !! I believe you should happy,too.

NEW!!! Resets to 240 meters anytime you like !!

Super Easy to use: 
1. Turn off your printer
2. Remove the cartridge
3.plug in resetter USB to pc or any usb port to get power than 
4. Place the cartridge chip on the resetter PIN for 8 seconds.  
5. Job done

Important Note: Once you did this please do not upgrade your firmware and remember close computer Wifi in case it automatic update new firmware. 
One time I update firmware to see what will happen and my old resetter does not work anymore and it took me long time to find new software to load into resetter and make it works for my xyz Firmware 1.2.7 now and This NEW RESTTER can do this firmware or before with no problem. if it does not work for you, i accept return my friend !! Enjoy and any problem let me know and i see what i can do for you !! once you purchase if you want the new software code let me know your email address or send me a text message and i will send to you no problem. !!


Model => I USE ON                        Firmware
Da Vinci 1.0                        1.2.7

It does not work for Da Vinci mini W cartridges.
======================================================================================================================
It might work on following or more since it is just reset the cartridge chip but not sure !!
Da Vinci 1.0A                1.0.1, 1.0.3, 1.0.5, 1.0.6*
Da Vinci Duo 2.0           2.0.J
Da Vinci AiO                 1.1.1, 1.1.3, 1.1.4, 1.1.5  1.1.6
or more .....................................etc .........