The vest "Shark" is modified version of the model "Corsair M", which conforms to the latest standards. Modular vest "Shark", has an improved ergonomic configuration of the elements, and also allows to use them depending on the specifics of the tasks and the likely threats. Very convenient and practical in the real world.

        On the entire surface of the vest is a belt tape system MOLLE, on which items of equipment and ammunition can be attached. All straps lines MOLLE vest have the same color in the color of the vest. What makes 100% draining the terrain. Belt tape is manufactured according to TU U 13.2-31778043-115: 2015 on polyamide yarn, has maximum breaking loads.

         The vest "Shark" is a modular system and can completely disassemble. Made of a very robust and high-strength quality Cordura fabric.

         The modification of the vest "Corsair M" was developed at the request of the Ministry of Defense of Ukraine taking into account the provided draft tactical and technical conditions. The "Shark" model has been improved already from the point of view of practical field military tests of the previous model.

1. Regulation and the compound vest "Shark" in the shoulder area by means of a double overhead valves, which are attached via Velcro hook and loop fastener element to protect the breast from above and below, which provides an enhanced fixation. At the end of the shoulder edges of the valve mounting the chest sewn belt protection belt that provides quick release items of vest for the urgent release of the user on their own or with the help of the second persons in the event of an emergency. 

2. Completion of vests "Shark" can be supplemented with hard armor plates or soft Kevlar ballistic inserts (at an additional cost).

3. On the inside surface of the vest there is a special voluminous cushioning material, which has channels that allow airflows to cool and remove moisture from the body.

4. In the absence of removable side elements of the vest, fastening and regulation of the vest at the waist is carried out by means of a belt and textile fasteners (Velcro). In the previous version, Fastex were used, but practical use (operation of the vest) showed that the Fastex have a number of drawbacks. In the first they are in the process of operation faster failing than the textile fastener. Secondly, in this place, when the body armor is used for a long time, they rub the body and squeeze the blood streams, which leads to discomfort and numbness. The Velcro textile closure completely eliminates this discomfort.

5. The fastening of the left and right axle shafts of the side protection in front has a double fixation with a textile fastener. Side elements of the vest is attached to the breast protection cover and is additionally covered with a breast valve. On the edges of the left and right side elements, sewn belt tapes for their quick detachment from rear (back) side of the vest.

6. In the side compartments, soft ballistic inserts and rigid armor plates can be placed. You can buy this protection hard or soft inserts is for add cost.

7. The left and right side elements of the vest are have MOLLE system from the back, this fastening allows you to adjust the vest at the waist. This allows you to wear a vest like in summer on a T-shirt and in winter on a warm volumetric jacket.

8. The vest is equipped with a removable neck (collar) element, which consists of two parts.

9. In the inner volume of the external chest and back protection pockets are located pockets for placing armor plates from the 2nd to the 6th grade of protection standard of Ukraine or IIIA to IV level protection by USA Standart.

10. The groin element is fastened with belt strips to the MOLLE slings located on the bottom of the chest cover from the inside.

11.  Pocket for armored plates. This version of the vest "Shark" provides pocket that can hold plates of  XL "Extra large" 30x35 cm / 12'x14'.

12. The vest has 8 rows of MOLLE sling lines, for which you can install all necessary pouches, Mags, pockets for documents, a flashlight, walkie-talkie and other ammunition. All these pouches you can also buy in our Ebay-shop or on request if something you can not find on our page.   

The standard version of the vest consists of 9 elements: The vest front, the vest rear, each side of the vest (left+right), the detachable shoulders and 2-piece neck collar, and the groin protector.   

For additional cost the vest can be completed:

- soft ballistic inserts made with para-aramid fabric "Kevlar" according to the Ukrainian standard (DSTU) or the US standard. The soft ballistic inserts is in a sealed case of waterproof fabric and has protection over the entire surface of the body armor vest. 

-  armor plates in accordance with the standard of Ukraine (DSTU) or the US standard. The hard armor plates are located in the extra pockets of the body armor vest.   

* In addition, the vest can be equipped with various pounches and Mags, as well as to increase the range of protective vests, by the following ingredients:

- fixing the rifle belt;

- protection of the pelvis (coccyx) of the lower rear side;

- deltoid axillary lateral zone elements;

- camerbands for extra side plates;   

Hard plates and soft kevlar (aramid) ballistic inserts are not included in the cost of the vest and can be ordered at extra cost. 

But if you complete it soft ballistic inserts, than 

This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.