The GearHooks® SBR4/8/12 Ski and Board Rack, with double pair hooks, is the wall mounting ski storage solution to hang up to 12 pairs of skis*, and/or 6 snowboards in the minimum space at home, in the garage or in a ski lodge.
The Ski Club of Great Britain recently tested and reviewed the full range. This is what they said:
"Gearhooks will come as a boon to anyone looking for a simple, stylish and convenient way to rack their kit."
"Given the price of a Gearhooks system it’s a great investment for any skier or boarder with a quiver."
They concluded that the GearHooks ski and board racks were:
"A simple, easy-to-use storage solution for skis and boards at a great price"
You can read the full review here : kit-news/2018/09/gear-hook-review
It is a combination of ski rack, snowboard rack and ski equipment organiser. It will safely store all your expensive gear in just 1M of wall space, off the floor and out of the way where its clean and dry.
The racks come with 2, 4 or 6 x 300mm long GearHooks. Each one takes 2 pairs of skis* or 1 snowboard so you can store up to 12 pairs of skis, 6 or more snowboards or any combination of skis and boards.
The SBR4 has 2 x 300mm long GearHooks® for 4 pairs of skis
The SBR8 has 4 x 300mm long GearHooks® for 8 pairs of skis
The SBR12 has 6 x 300mm long GearHooks® for 12 pairs of skis
Each GearHook can be fitted anywhere on the rail and be moved up or down to stagger the bindings. This allows the most pairs of skis or boards to be stored in the minimum amount of wall space.
You can order a rail with just the right number of hooks (you can always order more later) or order one with more hooks and use any spare ones to store clothing, transceiver, probes, shovel, backpacks, helmets and much more.
Each ski rack comprises a 1M long steel rail which is galvanised and powder coated in your choice of colour. Each 300mm long GearHook is made from cold formed, zinc plated, mild steel with a soft rubber coating. GearHooks are fitted to the rail with a CNC machined clamp, M8 hex head (Allen key) bolt and sliding nut. The end result is as strong as a custom welded rack but you can add or move hooks whenever you are other hooks (available separately) for more skis, snowboards, boots, clothing, helmets, backpacks, transceivers, shovels and probes.
* Different ski type limitations
Mounting 12 pairs of adult Piste skis or a mix of adult and child skis on a rack creates very different loads and stresses to mounting 12 pairs of All Mountain, Powder or Fat skis.
We do not recommend putting 2 pairs of heavy skis (like All Mountain, Powder or Fat skis over 7KG) on one hook as this may cause the rail to flex.
One pair of Heavy skis should be mounted closest to the wall. These may also spread the prongs of the hook and, if they, or the next pair of skis, have a small tip rocker, they may slip through the prongs. We supply a velcro strap to prevent this happening. This should be fitted after the first pair of skis.
If you have more than 6 pairs of heavy skis and bindings, you may need extra wall fixings. In some cases, with all heavy skis, you may be limited to one pair of skis per hook.
We also produce a rack for up to 6 pairs of skis which may be a better option for over 6 pairs of skis that are over 7kg.
Specifications
Each GearHook is made from cold formed, zinc plated, mild steel with a soft rubber coating. GearHooks are fitted to the rail with a CNC machined clamp, M8 hex head (Allen key) bolt and sliding nut. The end result is as strong as a custom welded rack but you can add or move hooks whenever you want.
The GearHooks® SBR4/6/12 ski and snowboard rack includes;
- 1 x 1M long cold rolled steel rail galvanised and powder coated with over 20 fixing slots
- Your choice of 8 different colours (red, orange, yellow, blue, green, black, white & grey)
- 2 x black plastic end caps
- 3 x hex head wall bolts (Allen Key) for wood or plasterboard battens
- 3 x expanding nylon fixings for brick, block, stone or concrete
- plus
- 2/4/6 x cold formed steel GearHooks (300mm long) with bright zinc plating to prevent corrosion
- 4/8/12 x soft rubber sleeves to hold and protect your skis
- 2/4/6 x CNC machined clamps in black engineering polymer that is stronger than aluminium
- 2/4/6 x M8 sliding nuts to position and adjust the hooks anywhere on the rail
- 2/4/6 M8 hex head bolts (Allen Key) to attach the hooks to the sliding nuts and rail
- Full fitting and use instructions
- No quibble Lifetime guarantee
Please note : If you plan to store skis and snowboards on the same rail : snowboards resting on their bindings will stick up above the ski tips by about 0.5M. An alternative to this is to store two snowboards back-to-back and hang them by their tips.
For More information about GearHooks take a look at our FAQs.
All prices are reduced by at least 20% during the launch period.
Save money. Order Today!
Make Space - Save Time - Do more!
Please note that photographs are for illustration only and may not show your product choice
