Product Specifications:
1 Operating voltage: DC 12V
2 Operating Current(Digital tube off): Standby current (all relays closed) 8MA, 1 relay open 41MA, 2 relays open 75MA,
Operating Current(Digital tube on): Standby current (all relays closed) 26MA, 1 relay open 59MA, 2 relays open 93MA,
3 Size: 70x50x20
4 Weight : 40g
5 Relay maximum load capacity: DC 1-100V/6A; AC 85-265V/5A
Product Features:
2 channel relay, each channel independently triggered independent delay, do not interfere with each other.
6 kinds of functional modules, each functional module has three sub-modes (no cycle, Maximum 99 cycle, always cycle).
Input optical isolation.
Power anti-reverse diode.
High Q value SMD electrolytic capacitors.
Short press: press key time is less than 2 seconds;
Long press: press key time more than 2 seconds;
Status: working status , set status, power-saving status.
working status : start work after powering . Displays the remaining time of 1 channel, the parameters can be displayed the "channel select" to set ;
Set status: short press the "SET" key to enter "channel select" Status. Short press "OK" button to exit the setting;
power-saving status: in this Status , digital tubes donot display, and other features work correctly. Long press "OK" button after 5 seconds to enter power-saving status, press again "OK" button for 5 seconds or re-power to exit power-saving status.
Factory settings: press and hold "++" and "--" two button for 3 seconds, to restore factory settings, and the digital tube will turn open . After re-power , will run default parameters .
Settings:
1. After power , the remaining time of digital display channel (default channel 1).
2.Press "SET" button to enter "channel select" interface. In the "channel select" screen, then press "++"/"-" button to select channel to operate (relay). Press "OK" button will exit "channel select" screen, and save the current parameters. Press "SET" button into "parameter settings" interface.
3. under "parameters" screen press "SET" button you can switch parameters. "++"/"-" Button to modify the parameters. Press the "OK" button to exit the "parameters" screen, and save the current parameters.
"channel select" interface:
BIT 4、BIT 3 |
BIT 2 |
BIT 1
|
Instructions |
Ch |
- |
1 |
Under this screen press "SET" to Setting Channel 1 Parameters. |
Ch |
- |
2 |
Under this screen press "SET" to Setting Channel 2 Parameters. |
"parameter settings" interface
BIT 4 (Parameters) |
BIT 3 |
Parameter definition |
BIT 2 BIT 1 |
Factory default parameters |
1 |
- |
Function Mode(F) |
F0-F5 |
F0 |
2 |
- |
Timer T1: seconds |
00-59 seconds |
4 |
3 |
- |
Timer T1: minutes |
00-59 minutes |
0 |
4 |
- |
Timer T1: hours |
00-99 hours |
0 |
5 |
- |
Timer T2: seconds |
00-59 seconds |
4 |
6 |
- |
Timer T2: minutes |
00-59 minutes |
0 |
7 |
- |
Timer T2: hours |
00-99 hours |
0 |
8 |
- |
Number of cycles : Nx |
00-99 |
1 |
Timer T1 T2 time minimum unit is second, so the timing range of T1 T2 is 99 hours 59 minutes 59 seconds.
The number of cycles(Nx) is the number of cycles to perform an action triggered once(Nx = 00 indicates always cycle, Nx = 01 means no cycle).So you can set Number of cycles is: 1-99 times or always cycle.
Noun resolved:
NO : Relay normally open contact
COM : Relay common contact
NC : Relay normally closed contact
Relay open: COM connect NO.
Relay close: COM disconnect NO.
Function Mode:
The following Function Modes can be set to cycle mode operation.You can set Number of cycles (Nx 1 ~ 99 times, 00 is always cycle, the default is 01 not cycle).
F0:After power-up, the relay close. Trigger input (IN1/2/3/4), relay open. T1 time delay close.
F1:After power-up, the relay open. Trigger input , relay close. T1 time delay open.
F2:After power-up, the relay close. Trigger input , delay time T1 and relay open. T2 time delay relay close.
F3:After power-up, the relay open.Trigger input , delay time T1 and relay close. T2 time delay relay open.
F4:After power-up, the relay close. After the delay time T1 and relay open. T2 time delay relay close.
F5:After power-up, the relay open. After the delay time T1 and relay close. T2 time delay relay open.
Typical applications:
1 DC 12V control circuit,Wiring diagram below. "LOAD" may be LED lights, fans, motors and
other DC 12V equipment
Payment :
(1).We accept PayPal only.
(2).We only ship the item to your Paypal address for fast and accurate shipment. If you want to change the address, please add a note when you make the payment. after you have paid.
(3).If you are paying through Paypal using eCheck, note that your item can be shipped only after eCheck has cleared.
(4).All payments are expected within 7 days after the last winning auction is closed. A non-payment dispute will be opened if full payment is not received.
(5).After you have won the auction, an email will be sent to your eBay registered email address.
Under normal circumstances, United States Buyers'package is expected to be delivered within 9 to 15 business days with tracking. other countries are 18 to 21 business days without tracking(If you need a tracking, please pay additional $3.00 USD and send us ebay/paypal message.).
All the items will be dispatched within 1 business day after the payment cleared. Items will arrive in 8-25 business days. The arrival time depends on some factors and different areas.
Please confirm address in your Paypal account, and leave your telephone number to ensure you can timely receive your items.
In order to protect both buyer and seller, we only accept PAYPAL payment.
Your immediate payment is appreciated, and we will leave positive feedback to you once the payment is made.
Check payments may delay the processing time because we will only send out the goods until it's cleared by Paypal.
Welcome to our store! We are a professional worldwide wholesale company, with our own factory located in China.
We supply many products including video game, Home & Garden, health & beauty, phone accessories, computers accessories, camera & camcorder, car accessories, flash disk & card, MP3,MP4 & MP5, Clothing accessories, games, toys & hobbies, jewelry, antique & craftwork. High product quality, reasonable prices, excellent customer service and a reliable credit standing is our tenet.
Please come back soon and visit us again!
We are looking forward to establishing cooperative relationships with you. Please contact us for more information.
Thank you for shopping with us!
Our products are of high quality, and we offer 365 days warranty for all items.
We offers a No-hassle 30 days exchange (replace) only if your parcel is defective due to manufacturing problem.
However, as every sale is final, we appreciate your reconsideration for any return. Thank you again for your business.
Any returning, pls inform us first and send back with return ID (given by LD customer service).