Read whole description, please
Description is part of contract between Seller and Buyer
Buyer agrees to this contract by purchasing item listed on this listing

Description, Features, Specifications and Applications

High Perfomance
  • 10Gbps per port maximum throughput for high bandwidth storage (SAN) and networking (LAN) traffic
  • Full hardware offload for FCoE protocol processing
  • 250,000 IOPS per port deliver high I/O transfer rates for storage applications
  • Full support for TCP/IP and Ethernet performance enhancements such as priority-based flow control (802.1Qbb), jumbo frames, checksum offloads, and segmentation offloads
Lower Total Cost of Ownership (TCO)
  • Reduced hardware, cabling, power, cooling, and management costs through convergence of data and storage networking
  • Preservation of familiar data and storage concepts resulting in lower training and administrative costs
Investment Protection
  • Works seamlessly with existing Fibre Channel storage
  • Communicates via Ethernet, the most common networking technology in the world
  • Compatible with existing Fibre Channel drivers and management applications that have been deployed in millions of existing systems
Host Bus Interface Specifications
Bus interface
  • PCI Express Gen1 x8 or PCI Express Gen2 x4 Hardware platforms
  • Dell PowerEdge® Servers (R410, R510, R610, R710, T610, and T710)
Compliance
  • PCI Express Base Specification, rev. 2.0, PCI Express Card Electromechanical Specification, rev. 2.0, PCI Bus Power Management Interface Specification, rev. 1.2
Ethernet Specifications
Throughput
  • 10Gbps full duplex line rate per port Topology
  • Any 10Gb Ethernet Network Ethernet Frame
  • 1500 byte or 9000 byte (Jumbo Frame) Stateless offload
  • IP, TCP, and UDP checksum offloads
  • Large and Giant Send Offload (LSO, GSO)
  • Receive Side Scaling (RSS)
  • Header-data split
  • Interrupt coalescing
  • NetQueue
Enhanced Ethernet
  • Priority-based flow control (802.1Qbb rev. 0)
  • Enhanced transmission selection (802.1Qaz rev. 0)
  • DCBX protocol (802.1Qaz rev. 0)
Compliance
  • IEEE: 802.3ae (10Gb Ethernet)
  • 802.1q (VLAN)
  • 802.3ad (Link Aggregation)
  • 802.1p (Priority Encoding)
  • 802.3x (Flow Control)
  • 802.3ap (KX/KX4)
  • 802.3ak (CX4)
  • IEEE1149.1 (JTAG)
  • IPv4 Specification (RFC 791)
  • IPv6 Specification (RFC 2460)
  • TCP/UDP Specification (RFC793/768)
  • ARP Specification (RFC 826)
FCoE Specifications
Performance
  • 250,000 IOPS per port
Logins
  • Support for 2048 concurrent logins and 2048 active exchanges
Class of service
  • Class 3
Protocols
  • FCP (SCSI-FCP)
  • FC-TAPE (FCP-2)
Compliance
  • SCSI-3 Fibre Channel Protocol (SCSI-FCP)
  • Fibre Channel Tape (FC-TAPE) profile
  • SCSI Fibre Channel Protocol-2 (FCP-2)
  • Second Generation FC Generic Services (FC-GS-2)
  • Third Generation FC Generic Services (FC-GS-3)
Tools and Utilities
Management tools and device utilities
  • SANsurfer® (GUI and CLI) for FCoE
  • SANsurfer (CLI) and OS-based management tools for network interface card
  • Utilities for programming boot code; Linux® scripting tools
Boot support
  • LAN and SAN boot (PXE, BIOS, UEFI, FCode) APIs
  • SNIA HBA API V2, SMI-S, and FDMI
  • NDIS 5.x, NDIS 6.x, and WMI
Operating systems
  • Windows Server® 2003, 2008, 2008 R2
  • Red Hat® RHEL AP 5.x
  • Novell® SLES 10.x, 11
  • VMware® ESX/ESXi 4.0
Physical Specifications
Ports
  • Dual 10Gbps Ethernet (SFP+)
Form factor
  • Low profile PCI Express card: (6.6 in. × 2.54 in.) Environment and Equipment
Specifications
Airflow
  • 100 LFM
Temperature
  • Operating: 0°C/32°F to 55°C/131°F
  • Storage: -20°C/-4°F to 70°C/158°F
Humidity
  • Relative (non-condensing): 10% to 90%
  • Storage: 5% to 95%
Power dissipation
  • 9.7 watts (typical)
Agency Approvals—Product Safety
US/Canada
  • UL60950-1; CSA C22.2 60950-1 Europe
  • EN60950-1:2006+A11; EN60825- 1:1994+A1+A2; EN60825-2:2004 Agency Approvals—EMI and EMC
US/Canada
  • FCC CFR Title 47, Part 15, Subpart B:2007 Class A; ICES-003:2004 Class A
Europe
  • EN55022:2006 Class A; EN55024:1998; EN61000-3-2:2006; EN61000-3-3:1995+A1+A2
Asia/Pacific
  • VCCI:2008-04 Class A (Japan); KCC-RRL KN22 KN24 Class A (Korea); AS/NZS CISPR 22:2006 Class A (Australia/NZ); BSMI CNS 13438:2006 Class A (Taiwan)

Payment, Invoice, Packing, Shipment and Return Policy

Payment have to be made within 16 days from purchase date.
Payment can be made using PayPal only.
Credit Cards and Debit Cards are accepted via PayPal.
No direct Credit Card or Debit Card Payment is accepted.
Cash is not be accepted.
In case of payment not made within 16 days from purchase date "unpaid item case" will be automatically opened.
eBay will generate Invoice from order data.
This data is provided by buyer at payment time.
There is no possibility for any invoice amendment.
Invoice will be provided for every sold item(s).
Invoice will be included with sold item(s) inside package.
All prices are exclusive VAT, as seller is not VAT registered.

All items will be packed using
ESD safe Bags
Air Bubble Wrap
Sturdy Large Letter Box, unless order will not fit
Shipped using Royal Mail
Dropped off same working day at local Post Office before Last Collection
Definitions:
Buyer: Consumer or Enterprise who commenced to purchase item or service
Consumer: Living Human Being
Enterprise: any kind of corporation, including charities
Seller: Living Human Being who is selling item or service on this listing

1. Consumers intending to return item for refund need to inform seller within 14 calendar days (unless otherwise stated in item listing) from the day after the item is received.
2. Buyer needs to return unused item in unopened undamaged packaging with undamaged "Return VOID Label" still on a seal of packaging in order to get a refund. Items used by buyer are not eligible for return.
3. European Union Consumers who have returned unused item in unopened packaging for refund will be refunded both item price and cheapest Delivery Option cost.
4. Consumers from outside of European Union who returned item for refund will be refunded in full less Delivery Costs. Seller will keep Delivery Costs.
5. All returned items must be ESD (ElectroStatic Discharge) protected unless those items are sold as brand new in original packaging and original packaging is used to ship the item back to the seller. Items not protected from ESD will be deemed to be damaged by buyer. Please ask seller for advice, if unsure what can be used for ESD protection. Seller will protect items from ESD.

6. All numbers uniquely identifying item (eg serial, MAC, WNN, UUID) will be written down right before dispatch.

7. "not as described" items returned by buyer to seller will be fully refunded by seller.
8. All damages have to be reported as soon as possible.
9. Damaged items have to be returned to seller and received by seller in order to receive a refund.

10. All items claimed to be defective will be tested upon receiving.

11. All items on this listings are eligible for the right to cancel the purchase within 14 days of receiving the item, if delivery address is within European Union.
12. Buyer may cancel purchase and return purchased item to seller within 14 days from receiving item, if delivery address is within European Union.
13. Time will be counted from signing for or delivery attempt.

14. Checking Tracking is buyer's duty.
15. All items with Delivery Attempt Recorded on Tracking will be deamed as Delivered.
16. All items, which reached Custom Office will be deamed as Delivered.

Points 17 - 21 applies ONLY to Enterprises 17. Enterprise agrees that Delivery Service is a Service. Delivery Service is NOT goods.
18. Fulfilled Delivery Service Charges is not refundable unless item is defective or damaged or "does not match description".
19. Delivery Service Charges is subject to eBay and PayPal fees.
20. Price of item includes part or whole Delivery Service Charges.
21. All Delivery Service Charges will be covered by Enterprise.

22. Buyer agrees with this Return Policy by buying this item.

Postage

Offered Postage methods
Royal Mail 1st Class Signed For
Royal Mail Special Delivery Guaranteed by 1pm
All import charges will be paid by buyer
Offered Postage methods
Royal Mail International Tracked and Signed (prefered method)
Royal Mail International Tracked (used when above is not available)
Royal Mail International Signed (used, when both above are not available)
All import charges will be paid by buyer
Use Royal Mail International Tracked delivery method, please
eBay requires valid tracking for ALL orders shipped to USA
ALL orders with different shipment method will be cancelled
All import charges will be paid by buyer
Offered Postage methods
Royal Mail International Tracked and Signed (prefered method)
Royal Mail International Tracked (used when above is not available)
Royal Mail International Signed (used, when both above are not available)

ESD Safety

ESD stands for ElectroStatic Discharge
ElectroStatic field will build up on every insulator
Sources of ElectroStatic are ions from air and friction between two insulators.
Carpet, rag, plastic, synthetic fabric (clothing), wool is known source of ElectroStatic
ElectroStatic Discharge is ALWAYS damaging electronics
ESD sensitive device should not be placed in proximity of any sources of ElectroStatic
ESD sensitive device should be protected at all times by storing it in ESD bag or original packaging
Seller will always use ESD (ElectroStatic Discharge) safe bags
Seller will always use Grounded WristStrap while handling ESD sensitive devices
Seller will always minimize time, when ESD sensitive device is not fully protected from ESD
To minimize possibility of damaging ElectroStatic Discharge sensitive Devices you should always follow simple procedure
Ground yourself - either by touching earth directly or indirectly
Wear properly earthed WristStrap or AnkleStrap
Touch ground / soil. Ground should be humid to increase conductivity
Touch earthed part of electric device.
Touch ESD bag FIRST
All items involved in any procedure in which ESD sensitive device is involved should be earthed first in order to equalize potentials
ALWAYS keep this device in ESD bag unless you are using it.
This device should never be handled on carpet, rag, syntetic fabric or partly syntetic fabric, wool or any insulator as this may be potential source of ESD.
Most of fabrics (clothing) is source of ESD too.
Only non-synthetic (like cotton) fabrics are ESD safe.