Read whole description, please
Description is part of contract between Seller and Buyer
Buyer agrees to this contract by purchasing item listed on this listing
Description, Features, Specifications and Applications
Network Interface Controller
Silicom PEG6BPI6-SD-RoHS
Based on Intel PRO 1000 ET 82576
- Bypass / Disconnect Ethernet ports on Power Fail, System Hangs or Software
- Application Hangs
- Software programmable Bypass, Disconnect or Normal Mode
- On Board Watch Dog Timer (WDT) Controller
- Software programmable time out interval
- Software Programmable WDT Enable / Disable counter
- Software programmable Bypass Capability Enable / Disable
- Software Programmable Disconnect Capability Enable / Disable
- Software Programmable mode (Bypass, Normal or Disconnect mode) at Power up
- Software Programmable mode (Bypass, Normal mode) at Power off
- Independent Bypass operation in every two ports
- Emulates standard NIC
Intel Features
- Multiple Queues: 8 queues per port
- RSS (Receive-Side Scaling)
- MSI-X
- Low Latency Interrupts
- Intel Virtualization Technology (Intel VT) for Connectivity, which includes:
- VMDq (Virtual Machine Device queues)
- Intel I/OAT (Input/Output Accelletion Technology)
- SR-IOV (Single Root I/O Virtualization)
- End-to-End Wired security
- Authentication and Encryption for
- IPSec
- LinkSec
- Authentication and Encryption for
- iSCSI Accelleration
- PXE boot
- iSCSI Boot
- uEFI Drivers
- Support for most Network Operating Systems (NOS)
- Direct Cache Access
- Tx/Rx IP, SCTP, TCP, and UDP checksum offloading (IPv4, IPv6) capabilities
- Tx TCP segmentation offload (IPv4, IPv6)
- Receive and Transmit Side Scaling for Windows* environment and Scalable I/O for Linux* environments (IPv4, IPv6, TCP/UDP)
- Virtual Machine Direct Connect (VMDc) (eight virtual functions per port)
- IPv6 offloading
- Advanced packet filtering
Bypass Specification
- 3,276,800 mSec (3,276.8 Sec): Maximum
- 100 mSec ( 0.1 Sec) : Minimum
- WDT Interval = (2^wdt_interval_parameter)*(0.1) sec.
- wdt_interval_parameter: {Valid Range: 0-15}
Intel Specification
- Intel® 82576 Gigabit Ethernet Controller
- Industry-leading, energy-efficient design for next-generation Gigabit performance and multi-core processors
- Low-profile
- Enables higher bandwidth and throughput from standard and low-profile PCIe slots and servers
- Intel® Ethernet iSCSI
- iSCSI performance using native iSCSI initiators integrated into the operating system
- Hardware-based iSCSI acceleration without offloading to a propriatary TCI/IP stack
- Supported in virtualized environments
- 4Mbits Flash Supports
- PXE
- iSCSI Boot
- uEFI drivers
- Load balancing on multiple CPUs
- Increases performance on multi-processor systems by efficiently balancing network loads across CPU cores when used with Receive-Side Scaling from Microsoft or Scalable I/O on Linux*
- Compatible with x4, x8, and x16 standard and low-profile PCI Express* slots
- Allows each port to operate without interfering with the other
- Multi-port design
- Enables dual-port operation in almost any PCI Express server slot, except x1 slots
- Support for most network operating systems (NOS)
- Enables widespread deployment
- RoHS-compliant
- Compliant with the European Union directive 2002/95/EC to reduce the use of hazardous materials
- Intel® QuickData Technology
- DMA Engine: enhances data acceleration across the platform (network, chipset, processor), thereby lowering CPU usage
- Direct Cache Access (DCA): enables the adapter to pre-fetch the data from memory, thereby avoiding cache misses and improving application response time
- MSI-X support
- Minimizes the overhead of interrupts
- Allows load balancing of interrupt handling between multiple cores/CPUs
- Low Latency Interrupts
- Based on the sensitivity of the incoming data it can bypass the automatic moderation of time intervals between the interrupts
- Header splits and replication in receive
- Helps the driver to focus on the relevant part of the packet without the need to parse it
- Multiple queues: 8 queues per port
- Network packet handling without waiting or buffer overflow providing efficient packet prioritization
- Tx/Rx IP, SCTP, TCP, and UDP checksum offloading (IPv4, IPv6) capabilities
- Lower processor usage
- Checksum and segmentation capability extended to new standard packet type
- Tx TCP segmentation offload (IPv4, IPv6)
- Increased throughput and lower processor usage
- Compatible with large send offload feature (in Microsoft Windows* Server OSs)
- Receive and Transmit Side Scaling for Windows* environment and Scalable I/O for Linux* environments (IPv4, IPv6, TCP/UDP)
- This technology enables the direction of the interrupts to the processor cores in order to improve the CPU utilization rate
- Virtual Machine Device queues (VMDq)
- Offloads the data sorting functionality from the Hypervisor to the network silicon, thereby improving data throughput and CPU usage
- Provides QoS feature on the Tx data by providing round robin servicing and preventing head-of-line blocking
- Sorting based on MAC addresses and VLAN tags
- Next-generation VMDq
- Enhanced QoS feature by providing weighted round robin servicing for the Tx data
- Provides loopback functionality, where data transfer between the virtual machines within the same physical server need not go out to the wire and come back in. This improves throughput and CPU usage.
- Supports replication of multicast and broadcast data
- Virtual Machine Direct Connect (VMDc) (eight virtual functions per port)
- Provides an implementation of the PCI-SIG standard for I/O Virtualization. The physical configuration of each port is divided into multiple virtual ports. Each virtual port is assigned to an individual virtual machine directly by bypassing the virtual switch in the Hypervisor, thereby resulting in near-native performance.
- Integrated with Intel® VT for Directed I/O (VT-d) to provide data protection between virtual machines by assigning separate physical addresses in the memory to each virtual machine
- IPv6 offloading
- Checksum and segmentation capability extended to the new standard packet type
- Advanced packet filtering
- 24 exact-matched packets (unicast or multicast)
- 4096-bit hash filter for unicast and multicast frames
- Lower processor usage
- Promiscuous (unicast and multicast) transfer mode support
- Optional filtering of invalid frames
- VLAN support with VLAN tag insertion, stripping and packet filtering for up to 4096 VLAN tags
- Ability to create multiple VLAN segments
- On-board microcontroller
- Implements pass through manageability via a sideband interface to a Board Management Controller (BMC) via SMBus
- Advanced filtering capabilities
- Supports extended L2, L3, and L4 filtering for traffic routing to BMC
- Supports MAC address, VLAN, ARP, IPv4, IPv6, RMCP UDP ports, and UDP/TCP ports filtering
- Supports flexible header filtering
- Enables the BMC to share the MAC address with the host OS
- Preboot eXecution Environment (PXE) Support
- Enables system boot up via the LAN (32-bit and 64-bit)
- Flash interface for PXE image
- Simple Network Management Protocol (SNMP) and Remote Network Monitoring (RMON) Statistic Counters
- Easy system monitoring with industry-standard consoles
- Wake-on-LAN support
- Packet recognition and wake-up for LAN on motherboard applications without software configuration
- iSCSI boot
- Enables system boot up via iSCSI
- Provides additional network management capability
- Watchdog timer
- Used to give an indication to the manageability firmware or external devices that the chip or the driver is not functioning
- IEEE 1588 precision time control protocol
- Time synch capability—synchronizes internal clocks according to a network master clock
Payment, Invoice, Packing, Shipment and Return Policy
Payment have to be made within 16 days from purchase date.
Payment can be made using PayPal only.
Credit Cards and Debit Cards are accepted via PayPal.
No direct Credit Card or Debit Card Payment is accepted.
Cash is not be accepted.
In case of payment not made within 16 days from purchase date "unpaid item case" will be automatically opened.
This data is provided by buyer at payment time.
There is no possibility for any invoice amendment.
Invoice will be provided for every sold item(s).
Invoice will be included with sold item(s) inside package.
All prices are exclusive VAT, as seller is not VAT registered.
ESD safe Bags
Air Bubble Wrap
Sturdy Large Letter Box, unless order will not fit
Dropped off same working day at local Post Office before Last Collection
Buyer: Consumer or Enterprise who commenced to purchase item or service
Consumer: Living Human Being
Enterprise: any kind of corporation, including charities
Seller: Living Human Being who is selling item or service on this listing
1. Consumers intending to return item for refund need to inform seller within 14 calendar days (unless otherwise stated in item listing) from the day after the item is received.
2. Buyer needs to return unused item in unopened undamaged packaging with undamaged "Return VOID Label" still on a seal of packaging in order to get a refund. Items used by buyer are not eligible for return.
3. European Union Consumers who have returned unused item in unopened packaging for refund will be refunded both item price and cheapest Delivery Option cost.
4. Consumers from outside of European Union who returned item for refund will be refunded in full less Delivery Costs. Seller will keep Delivery Costs.
5. All returned items must be ESD (ElectroStatic Discharge) protected unless those items are sold as brand new in original packaging and original packaging is used to ship the item back to the seller. Items not protected from ESD will be deemed to be damaged by buyer. Please ask seller for advice, if unsure what can be used for ESD protection. Seller will protect items from ESD.
6. All numbers uniquely identifying item (eg serial, MAC, WNN, UUID) will be written down right before dispatch.
7. "not as described" items returned by buyer to seller will be fully refunded by seller.
8. All damages have to be reported as soon as possible.
9. Damaged items have to be returned to seller and received by seller in order to receive a refund.
10. All items claimed to be defective will be tested upon receiving.
11. All items on this listings are eligible for the right to cancel the purchase within 14 days of receiving the item, if delivery address is within European Union.
12. Buyer may cancel purchase and return purchased item to seller within 14 days from receiving item, if delivery address is within European Union.
13. Time will be counted from signing for or delivery attempt.
14. Checking Tracking is buyer's duty.
15. All items with Delivery Attempt Recorded on Tracking will be deamed as Delivered.
16. All items, which reached Custom Office will be deamed as Delivered.
Points 17 - 21 applies ONLY to Enterprises 17. Enterprise agrees that Delivery Service is a Service. Delivery Service is NOT goods.
18. Fulfilled Delivery Service Charges is not refundable unless item is defective or damaged or "does not match description".
19. Delivery Service Charges is subject to eBay and PayPal fees.
20. Price of item includes part or whole Delivery Service Charges.
21. All Delivery Service Charges will be covered by Enterprise.
22. Buyer agrees with this Return Policy by buying this item.
Postage
Royal Mail 1st Class Signed For
Royal Mail Special Delivery Guaranteed by 1pm
Offered Postage methods
Royal Mail International Tracked and Signed (prefered method)
Royal Mail International Tracked (used when above is not available)
Royal Mail International Signed (used, when both above are not available)
Use Royal Mail International Tracked delivery method, please
eBay requires valid tracking for ALL orders shipped to USA
ALL orders with different shipment method will be cancelled
Offered Postage methods
Royal Mail International Tracked and Signed (prefered method)
Royal Mail International Tracked (used when above is not available)
Royal Mail International Signed (used, when both above are not available)
ESD Safety
ElectroStatic field will build up on every insulator
Sources of ElectroStatic are ions from air and friction between two insulators.
Carpet, rag, plastic, synthetic fabric (clothing), wool is known source of ElectroStatic
ElectroStatic Discharge is ALWAYS damaging electronics
ESD sensitive device should not be placed in proximity of any sources of ElectroStatic
ESD sensitive device should be protected at all times by storing it in ESD bag or original packaging
Seller will always use Grounded WristStrap while handling ESD sensitive devices
Seller will always minimize time, when ESD sensitive device is not fully protected from ESD
Ground yourself - either by touching earth directly or indirectly
Wear properly earthed WristStrap or AnkleStrap
Touch ground / soil. Ground should be humid to increase conductivity
Touch earthed part of electric device.
Touch ESD bag FIRST
All items involved in any procedure in which ESD sensitive device is involved should be earthed first in order to equalize potentials
ALWAYS keep this device in ESD bag unless you are using it.
This device should never be handled on carpet, rag, syntetic fabric or partly syntetic fabric, wool or any insulator as this may be potential source of ESD.
Most of fabrics (clothing) is source of ESD too.
Only non-synthetic (like cotton) fabrics are ESD safe.