Read whole description opening every tab every section, please
Description, Features and Specification
6Gb/s SAS2 SATA-III RAID
8 internal ports via single SFF-8087
Fusion-MPT™-architected LSI® SAS 2308 controller
This will work ONLY in Compatible Intel Servers. Please check compatibility before purchase.
- Implements one LSI SAS 2308 eight-port 6Gb/s to PCIe 3.0 controller
- Supports eight-lane, full-duplex PCIe3.0 performance
- Supports four internal 6Gb/s SATA+SAS ports
- Supports four external 6Gb/s SATA+SAS ports
- Supports SATA and SAS link rates of 1.5Gb/s, 3Gb/s, and 6Gb/s
- Provides one x4 internal mini-SAS connector (SFF-8087)
- Provides one x4 external mini-SAS connector (SFF-8088)
- Supports passive cable
- Supports RAID 0, RAID 1, RAID 10, or RAID 1E
- Supports up to 256 SATA or SAS end devices
- Offers a full-height bracket and low-profile bracket
- Provides activity LEDs
- Provides a universal asynchronous receiver/transmitter (UART) debug/diagnostic port
- Implements one LSI SAS 2308 eight-port 6Gb/s to PCIe 3.0 controller
- Supports eight-lane, full-duplex PCIe 3.0 performance
- Supports four internal 6Gb/s SATA+SAS ports
- Supports four external 6Gb/s SATA+SAS ports
- Supports SATA and SAS link rates of 1.5Gb/s, 3Gb/s, and 6Gb/s
- Provides one x4 internal mini-SAS connector (SFF-8087)
- Provides one x4 external mini-SAS connector (SFF-8088)
- Supports passive cable
- Supports RAID 0, RAID 1, RAID 10, or RAID 1E
- Supports up to 256 SATA or SAS end devices
- Offers a full-height bracket and low-profile bracket
- Provides activity LEDs
- Provides a universal asynchronous receiver/transmitter (UART) debug/diagnostic port
Payment, Packing and Shipment
Payment can be made using PayPal, credit or debit card.
Cash cannot be accepted.
In case of payment not made within 16 days from purchase date "unpaid item case" will be automatically opened.
ESD safe Bags
Air Bubble Wrap
Sturdy Large Letter Box
Dropped off at local Post Office before Last Collection
ESD Safety
ElectroStatic field will build up on every insulator
Sources of ElectroStatic are ions from air and friction between two insulators.
Carpet, rag, plastic, synthetic fabric (clothing), wool is known source of ElectroStatic
ElectroStatic Discharge is ALWAYS damaging electronics
ESD sensitive device should not be placed in proximity of any sources of ElectroStatic
ESD sensitive device should be protected at all times by storing it in ESD bag or original packaging
Seller will always use Grounded WristStrap while handling ESD sensitive devices
Seller will always minimize time, when ESD sensitive device is not fully protected from ESD
Ground yourself - either by touching earth directly or indirectly
Wear properly earthed WristStrap or AnkleStrap
Touch ground / soil. Ground should be humid to increase conductivity
Touch earthed part of electric device.
Touch ESD bag FIRST
All items involved in any procedure in which ESD sensitive device is involved should be earthed first in order to equalize potentials
ALWAYS keep this device in ESD bag unless you are using it.
This device should never be handled on carpet, rag, syntetic fabric or partly syntetic fabric, wool or any insulator as this may be potential source of ESD.
Most of fabrics (clothing) is source of ESD too.
Only non-synthetic (like cotton) fabrics are ESD safe.
Wool is not ESD safe and should never be in proximity to ESD sensitive devices.
It is enough to bring source of ESD in proximity of ESD sensitive device in order to damage it.
Damage may be undetectable, but may cause intermittent errors.
All devices delivered in ESD bag are ESD sensitive
Custom Duty (non-EU Buyers only) and USA Buyers
Custom Duty will be paid by buyer
Seller does not charge Custom Duty
Buyer can pay Custom Duty checking out and shipping by Global Shipping Programme.
All the Global Shipping Programme shipping cost is paid directly to Pitney Bowes.
Pitney Bowes will handle your shipping and Custom Duty.
Any orders with delivery address within USA which will be placed and delivery method other then previously named methods chosen will be cancelled.