Highlights
Brands
LM2596 Step Down Module
Features
- Flux SKU:
BGAA100008 - Length (mm):
66 - Width (mm):
36 - Height (mm):
14 - Brand:
Unbranded/Generic - Main Colour:
Blue - Country of Manufacture:
China - MPN:
BGAA100008 - UPC:
Does Not Apply - Minimum Operating Temperature:
-40°C - Maximum Operating Temperature:
85°C - Number of Items:
1 - Soldering Points:
Input/Output - Input DC Voltage:
3.5-40V - Maximum Conversion Voltage:
0.92 - Output DC Voltage:
1.5-35V - Voltage Regulation:
±0.5% - Load Regulation Voltage:
±0.5% - Drive Current:
2A (3A with heat sink) - Chipset MPN:
LM2596 - Noted Onboard Components:
Input/output voltmeter - Response Time:
200µS
Description
This module is ideally suited to step a DC supply down to your projects required level to supply a prototyping board or microcontroller. Adjustments to the supply can be made with the use of the on board variable resistor.
The module features an onboard voltmeter readout to allow you to monitor the voltage levels on either the input or output terminals. The level displayed can be selected via the onboard micro switch. The addition of the display allows for the configuration of the voltage without the need to fiddle about with a multi-meter.
Used as a step down module you will be able to use a 12V input to supply a 5V output and a 24V input to output 12V. As a step up module you will be able to use a 12V input to supply a 15V. This allows you to use laptop brick-style power supplies to power your projects whatever they require.
As a result of a low switching frequency, the greater the input current the greater the inductance. Due to this high-frequency noise may be evident in the output.
Please do not hesitate to contact us if you require further information regarding the module's operation.
Images
Shipping
We offer a host of shipping options to meet your requirements. Our main
postal service is the Royal Mail 24. We aim to post same day when orders
are received before 15:00 GMT. Orders received after this time will be
posted the next business day.
Returns
We accept returns of unwanted, damaged or faulty items within 30 days of
purchase.
If you receive a damaged item please message us directly through the eBay
messaging system; attach pictures if possible. This will enable us to
process the return as fast as possible.
Be aware, if an item is "unwanted", return postage will be paid by the
consumer. Furthermore, if a returned "faulty" item is found to not be
faulty, postage costs will not be refunded. We are unable to refund the
cost of a courier and will only be able to refund return postage on
receiving a copy of the postage receipt.
Please ensure when returning an item, adequate packaging is used as we
will be unable to process the refund if the items are damaged in the post.
Company
Flux Workshop began trading late 2014, drawing from years of experience
and interest in electronics and building CNC machines. With the aim to
supply good quality components at reasonable prices that allow you, the
customer, to have the confidence to embark on your project.
We are here to help you in any way we can. If you need to make sure a
product is right for your needs or how to get the most from a product,
please do not hesitate to contact us through the eBay messaging service
(response usually within 24 hours).
Our Store
Cables
Clips & Clamps, Coaxial RF & BNC, Crimp, Flat Copper, IDC Ribbon, Molex, Phone, USB, Cable Ties & Organisers
Components
Battery Clips & Boxes, Buzzers & Loudspeakers, Capacitors, Crystals, Oscillators & Resonators, Fixings (Bolts, Nuts, Spacers, Standoffs), Heaters & Coolers, Heatsinks & Insulators, Jumpers, LEDs, Motors (DC, Drivers, Mounts, Pump, Servo, Sets, Stepper, Vibration), Piezoelectric, Relays, Resistors, Semiconductors, Sensors & Transducers, Sets, Solar Panels, Switches & Controls (Arcade, Lever, Micro, Optical, Panel, Reed, E-Stop), Wire
Connectors
Automobile, Aviation, Banana, Clips & Clamps, Coaxial RF & BNC, Crimps, Headers (2.0mm, 2.54mm, Sets), IC Sockets, Phone, Power, Terminal Block, USB, Waterproof
Machines
3D Printers (Cooling, Feeders, Heat Beds, Hot-end, Nozzles, Tape, Throats, Tube), General CNC (Coolant, Drag Chain, Dust Protection, Frame Plates, Touch Plates), Laser Cutting & Engraving (Complete Kits), Milling & Routing (Bits, Chucks, Collets, Complete Kits, Spindle Clamps)
Mechanical
Control, Drive Mechanisms (Armatures, Belts & Pulleys, Lead Screws), Fluid, Frame (Aluminium Extrusion, Brackets, Hinges), Guards, Linear Motion (Bearings, Shafts & Accessories), Radial Motion (Bearings, Gears, Propellers, Wheels & Castors)
Microcontrollers
8051 Chipset (Development Boards), Arduino-Compatible (Cases, Development Boards, Shields), ARM Chipset, BBC micro:bit-Compatible (Shields), CY Chipset, ESP Chipset (Development Boards, Shields), Kendryte Chipset, PIC Chipset, Programmers (Adapters, Modules), Raspberry Pi-Compatible (Shields, Case, Tools), STC Chipset, STM Chipset, Zigbee-Compatible (Shields)
Modules
Audio, Communication (1-Wire, Accessories, ASK, Bluetooth, CAN, Ethernet, GSM & GPRS, Light, Radio, RFID & NFC, RS232, RS485, TTL, Wi-Fi), Data Storage, Displays (Driver, LCD, OLED, TFT), Lasers, LEDs, Motors (Controller, DC, Drivers), Power (Adapters, Charger, Driver, Generators, Load, Rectifiers & Transformers, Regulators, Reverse, Transmitter), Relays (Accessories, Mechanical, Solid State), Sensors (Acceleration, Accessories, Compass, Current, Flow, Fluid Level, Gas, Gyroscopic, Heartbeat, Light, Magnetic, Metal, Particle, Pressure, Proximity, Signals, Sound, Temperature & Humidity, Ultrasound, Vibration, Voltage, Water), Signals, Solenoids, Switches & Controls (Arcade, Capacitive, Coin & Token, Conductive, Digital, Joystick, Lever, Magnetic, Membrane, Micro, Push, Rotary, Slide, Tilt), Timing
Power Supplies
Adapters, Units
Prototyping
Breakout Boards, Prototype Boards, Solderless Breadboards
Services
Tools
Electrical (Ammeters, Analysers & Debugging, Capacitance Meters, Etching, Function Generators, Insulation, Multi & Combi Meters, Oscilloscopes, Probes, Readers, Scales, Soldering, Transistor Testers, Voltmeters), Mechanical (Clamps, Crimpers & Strippers, Extractor, Measures, Pliers, Punches, Screwdrivers, Tweezers), Protective (Glasses & Goggles)