This will work for straight torch models such as the Bulldog HC1100 HC1200 series, ST900, ST1000, ST1600, ST1700, ST1800, ST1900, ST2600FC.
*Note* If you would like a parts breakdown in your package, message us which model number you are rebuilding and we can include one if available. Some older model breakdowns are no longer available, but the seat installation instructions are all very similar. If you notify us prior to shipping that you are rebuilding a CA1050 or CA1060 cutting attachment, we will include one set of cone end O-rings p/n 1407-0177 & 1407-0178. These O-rings are not part of the kit as they are not used on straight cutting torches.
There are five options for the repair kit:
Option 1 Repair kit only
Option 2 Repair kit plus Valve cap
Option 3 Repair kit plus Valve cap and tip nut
Option 4 Basic Seat Kit (Seat #16, bushing #15, #11 & #12 O-rings)
-Option 4 omits the washer & spring from the original kit,
as they rarely need to be replaced during rebuild.
Option 5 Basic Seat Kit (Seat #16, bushing #15, #11 & #12 O-rings)
plus valve cap & tip nut
-Option 5 omits the washer & spring from the original kit,
as they rarely need to be replaced during rebuild.
If your chosen repair kit option includes a valve cap, you may receive the style that has a smaller hole for the plunger and does not use a plastic bushing - depends on stock availability.
Kits will usually come in Victor branded packaging unless stock is depleted and kits are pieced from individual parts. Option 4 & 5 is not a Victor packaged kit.
If you message us with your model number, and you happen to have a cutting attachment (CA1050, CA1060) we will also include a set of cone-end o-rings (1407-0177 & 1407-0178) for your attachment. We will not send the o-rings after shipping the kit as they are not part of the repair kit, but included for free. You must message us prior to order processing.
The cone-end O-rings can also be purchased in sets of 6 here:
Check out our store for more listings!
https://www.ebay.com/str/mmservicesgasequipmentrepair
If we can order it, wecan list it. We stock most common repair parts for welding and gas cuttingequipment as well as rebuilt equipment. We've been selling parts and rebuildingequipment for over 40 years!
*WARNING*
Installation of partsshould be done by a qualified technician. Improperly installed parts, debris,dirt, oil, etc. can cause malfunction and/or serious injury or death. ALL oxygenservice parts and all seats should be installed with caution. Buyer assumesresponsibility.
RETURN/EXCHANGE POLICY
ALL NEW PARTS CAN BERETURNED OR EXCHANGED IF THEY ARRIVE DAMAGED OR DO NOT MATCH THE LISTINGDESCRIPTION WITHIN 30 DAYS IN ORIGINAL PACKAGING. USED/INSTALLED PRODUCTSCANNOT BE RETURNED.
RETURN SHIPPING ISPAID BY THE BUYER UNLESS A MISTAKE WAS MADE ON OUR PART, IN WHICH CASE WE WILLGLADLY PAY RETURN SHIPPING.
IF YOU WOULD LIKE HELPLOCATING THE PART/PART NUMBER YOU NEED, WE ARE AVAILABLE TO ASSIST YOU.
Restocking fee of 15%applies to all products returned unless they arrive damaged/defective or do notmatch item description in listing.