  
Nice MC424L R10 control board (new version)
with a box and transformer
 This is an offer for MC424L R10 control board with the box and transformer. In our other listings you will find an offer for MCA2 R10 electronic plate.
MC424L is an electronic control unit for the automation of swing gates. MC424L can command 24V WINGO, TOO, SFAB electromechanical actuators. It incorporates an amperometric device that verifies the force of the motors connected to it. This system allows for automatically detecting the limit switches, memorising the work times of each motor and detecting any obstacles during normal gate movement. These characteristics simplify the installation considerably, as the leaf offsets and work times do not require any adjusting.
The control unit is programmed in advance for the most frequently used functions and incorporates a radio receiver for the remote controls. In addition, a straightforward procedure can be implemented to select more specific functions.
MC424L is equipped with an SM-type connector for slot-in radio receivers and an IBT4N-type connector which, through the IBT4N interface, can be used to connect BusT4 devices, such as the Oview programmer.
The control unit is configured for being powered with PS124 back-up batteries which, in case of a power outage, function as an emergency power supply. Moreover, the MC424L is configured for being connected to a Solemyo solar power kit.
Technical features: - Mains power supply: 230 Vac ± 10% 50–60 Hz; fuse: 1A type T
- Maximum power input: 170 W
- Emergency power supply: configured for PS124 back-up batteries and for the Solemyo solar power kit
- Maximum motor current: 3 A (with “level 6” amperometric device intervention)
- Services power output: 24 Vdc maximum current 200 mA (the voltage may vary between 16 V and 33 Vdc)
- Phototest output: 24 Vdc maximum current 100 mA (the voltage may vary between 16 V and 33 Vdc)
- Warning light output: for 24 Vdc warning lights, maximum power 25 W (the voltage may vary between 16 V and 33 Vdc); for Nice ELDC and EL24 warning lights
- Electric lock output: for 24 Vdc lamps, maximum power 5 W (the voltage may vary between 16 V and 33 Vdc) or for 12 Vac electric locks, 15 VA
- ALT (STOP) input: for NC contacts or 8.2 kΩ fixed resistor +/– 25%
- Work time: measured automatically
- Pause time: settable
- Discharge time: settable
- Leaf opening delay: settable
- Leaf closing delay: measured automatically
- 1st motor output: for WINGO motors (WG2024, WG3524, WG4024, WG5024), TOO (TOO3024, TOO4524), SFAB (XME2024)
- 2nd motor output: for WINGO motors (WG2024, WG3524, WG4024, WG5024), TOO (TOO3024, TOO4524), SFAB (XME2024)
- Radio receiver: „SM”-type connector for SMXI, SMXIS, OXI receivers (Mode 1 and Mode 2)
- Operating temperature: from –20°C to +55°C
- Protection rating: IP54 (with container intact)
- Dimensions: 310x232x122 mm (with the box, not included here)
- Weight: 4,1 kg (with the box and transformer, not included here)
  For the purchased goods we give warranty
24
months
 Goods will be sent by post no later then the next day after payment.  Transfer to
  We are distributors of companies: FAAC, NICE, CAME, BENINCA, KEY, LIFE, GENIUS, KING GATES, BFT, V2, SAIMATIC, FADINI, HORMANN, SOMMER, NORMSTAHL, PROTECO. On request our client we can send down the machines also other companies, even the most unusual, and those which are used in industry.
A FULL VAT RECEIPT FOR ALL PURCHASES WILL BE PROVIDED
 |
|
|