15mm to 12mm Fork Thru Axle Conversion Kit for IRD MCX (straight steerer, optional fork on the Soma Wolverine) Mongoose Selous, Whyte Friston & Gisburn, Octane 1 Gridd, Motobecane Mulekick (and others), Ventus, Finna, and many other manufacturers Rigid Carbon 15x100 forks which came with a M14x1.5mm or M14x2mm threaded thru axle, 130mm long, often marked '130B' and a removable threaded insert on the non-disc/drive side.
Use 12mm wheels in a 15mm fork. Converts 15x100 forks to 12x100 standard! Kit includes the following:
• Threaded Insert: 19mm outer diameter, 13mm long, M12x1.5mm internal thread
• Thru Hole Insert: 15mm OD x 12mm ID, 13mm long
• Axle: 12mm x 130mm long, M12x1.5mm threads
Installation Notes:
1. Loosen set screw to remove existing threaded insert and replace with insert from kit.
2. Use grease on o-ring of thru hole insert and install into fork with a combined pushing and twisting motion. Do NOT use thru axle to drive thru hole insert into the fork.
3. Use grease on threads of thru axle. Torque 10-12 N*m using 5mm hex.
See other auctions for many more sizes! Kits are available for nearly every 15mm thru axle fork ever made.
Please contact me with any questions!
A note on international shipping: where applicable, when USPS First Class International shipping is selected you will be automatically upgraded to FedEx International Connect Plus (4-8 day transit time typically). Some locations are prohibitively expensive for this service (4-5 times higher than average) and as such will still receive standard USPS or Ebay International delivery. Please contact me with me any questions about transit time.