Up for sale here is this rebuild kit for the Pioneer SX-626. This includes all the parts you need to rebuild the Pioneer SX-626 power supply board, amplifier board, phono EQ board, preamp board, and tuner board, plus it includes an upgraded replacement main capacitor. This does not include new lights, fuses, or output transistors. The correct replacement output transistors are four MJ21196G (replaces 2SC793), available here. Please do not buy any of the fake Chinese output transistors listed on eBay--these are counterfeit and may damage your receiver.
This kit includes the following:
Power Supply Board:
4 capacitors
8 diodes
3 transistors
2 heat-sinks w/hardware (not pictured)
Amplifier Board:
13 capacitors
9 transistors
4 trimmers
Phono EQ Board:
8 capacitors
4 transistors
Preamp Board:
14 capacitors
4 transistors
Tuner board:
18 capacitors
1 new main capacitor (same diameter as the old cap so it will fit the clamp)
2 capacitors (one for the meter, one for the AWM-050 board)
Instructions
The kit for each board is bagged individually to make things easier.
These are all high-quality brand new genuine parts. The main capacitor is a Nichicon LS 6800 uf 80v capacitor, the other capacitors are 105° Panasonic FC, Nichicon PW, Nichicon KL, and Wima film caps at the same uf ratings and the same or higher voltage ratings, the transistors and diodes are the correct Fairchild/Onsemi subs for the original transistors, and the trimmers are new Bourns trimmers. These are not cheap Made in China parts, they are extremely high-quality and they are what I use when I rebuild Pioneer equipment. Two trimmers will need one leg extended in order to fit in perfectly, but it's pretty easy, and I'll explain how in the instructions.
I will include a surprisingly well-written instruction sheet, but rebuilding a receiver is moderately complicated, and you should know what you're doing and have a decent soldering iron and a dim-bulb tester with a 60W or 100W incandescent bulb. You will also need heat-sink compound to install the power supply board heat-sinks. Please see my pictures for details.
US shipping and handling is $6, and international is $28. If you have any questions, please ask.
Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 13 different values, a large variety of transistors for vintage stereo repair, and more. Just use "add to cart" on everything you want and then check out for combined shipping.