Determine what size belt your machine requires........Follow instructions below........
Step 1 - Remove old belt if still attached to machine.
Step 2 - Adjust motor to center position. Most sewing machine motors have a bolt or screw that holds the motor in place. When this bolt or screw is loosened, the motor will move in two directions. Loosen this screw and move the motor to center position and re-tighten the bolt or screw. The reason for this step is so that you will have about 1/2" worth of adjustment for the new belt.
Step 3 - Take a piece of string (non-stretchable) and run it around the machine's hand wheel and motor pulley. Be sure that the string is inside of the belt groove of the hand wheel and pulley.
Step 4 - Cut the string so that two ends meet. This will tell you what size of belt you will need.
Step 5 - Remove the string from the machine and lay it flat and straight on a table. Using a measuring device, measure the complete length of the cut string. Now you will know what size of belt to order. For example, if the string measures 13 1/2" long, then you will need a 13 1/2" belt.