Use for removal of traffic film residues and soiling on Vehicles

Spray Bottle Directions:

When applying direct to Body Work and Soiled Areas.

For best results dilute the TFR in to a Spray Bottle. Apply with the spray nozzle directly to the soiled areas. For best results leave the solution to soak for up to 5 minutes before cleaning off. Rinse thoroughly with clean water and ensure the solution is fully removed. Do not allow to dry prior to rinse down. Do not use on aluminium or galvanised surfaces

Pressure Washer Directions.

Suitable for use with pressure washer machines either hot or cold water.

Pre Dilute with water as required then pour into detergent tank. Adjust the feed rate as required.

Lightly Spray the vehicle and allow up to 5 mins to soak. Do not allow the residue to dry out or staining may appear. Rinse thoroughly after use. Do not use on aluminium or galvanised surfaces.

Please Note:

This concentrated TFR has a high level of foaming content for extended contact times.

Avoid the residue to dry out.

Dilution ratios are a guideline only and are subject to user’s requirements.

For best results avoid use in strong direct sunlight.

Light Soiling: Pre Dilute with 1:10 Parts Water

Mid Soiling: Pre Dilute with 1:5 Parts Water

Heavy Soiling: Pre Dilute with 1:2 Parts Water

Warning:
Ingestion may cause nausea and vomiting.

Skin corrosion/irritation May cause degreasing of the skin.

May cause irritation to skin.

May cause irritation to eyesEnsure adequate ventilation of the working area.
Wear protective clothing.
Eye face protection In case of splashing, wear:. Approved safety goggles.
Skin protection -Hand protection Chemical resistant gloves (PVC).