Read well before buying

You are buying only files for 3D printing, no material objects will be sent.

After the purchase you will be sent a link, where you can download the files

STL file optimized for FDM-FFF DLP-SLA-SLS printing

Hellboy 3D Model 

figurine, Miniature Assembly Figure

more than 200 hours of modeling

two versions, long and short horns

however, the dimensions can be changed with each slicer

in total HellBoy and composed of 4,178 mil points

all the files have been decimated by the polygons, but without losing the details, this makes the light files suitable for each computer

1:8 for FDM-FFF, 1:14 for DLP-SLA-SLS

dimensions approximately  FDM-FFF     Z 31Cm  X 12.5Cm   Y 15Cm

                                                                  Z 11.8inch  X 4.9inch  Y 5.9inch

dimensions approximately  DLP-SLA-SLS     Z 13Cm  X 6.9Cm   Y 7.1Cm

                                                                          Z 5.1inch   X 2.7inch   Y 2.8inch

all files are already in place for optimal printing 

HellBoy 3D model was designed to get a clean print result, without considering printing material consumption, However, you are free to rotate, or scale, 

every part of the model in the most convenient way for you.

Each file has been checked and repaired with Netfabb

The parts of the model are already positioned for 3D printing

Compatible with every Slicer- Simplify3D, Care, Slic3r, etc ...

All the parts of the model have been cut so as to be printed vertically, for a higher quality of printing

HELLBOY

Hellboy is the name given by Professor Trevor Bruttenholm to the demon Anung A Rama, summoned to Earth on December 23, 1944 by the evil Russian sorcerer Rasputin on behalf 

of the Ahnenerbe division of the SS with the intention of changing the fortunes of the war (in what was known as "Ragnarok Project"); the entity, however, 

is taken away from the Nazis by the Allies when it is still a puppy and will be raised by Bruttenholm as a son in a US Army base in New Mexico.

Become an adult Hellboy becomes the best detective of the Bureau of Paranormal Research and Defense, in which he has as companions and allies the young 

pyrocinetal Elizabeth "Liz" Sherman, the amphibious humanoid Abraham "Abe" Sapien, Johann Kraus, a mechanical android German who manipulates and controls metals with his smoke, 

Ben Daimio, an agent in the transformation into a werewolf jaguar, Alice Monaghan, a girl who kept some magical abilities and Roger, a little man of superhuman strength found 

in a castle in Romania.

Hellboy is very tall (about 2 meters), huge and has red skin, a long tail and two large horns that periodically shortens. His right forearm is huge and made of a very hard and 

unknown material. In place of feet it has goat legs. Beard and hair are black.

Hellboy's right arm seems indestructible and represents his demonic heritage. It has superhuman strength, remarkable strength and a regenerating factor that does not make it totally 

invulnerable. It ages much more slowly than humans. He has great investigative skills and is an expert in using both white and firearms.

"wikipedia"

Recommended settings for printing

each part was cut to be printed vertically, to have a better quality print, so for the upper parts, 

it is recommended to print with a 4-5 skirt

Quality

Layer height: 0.1mm*

Initial layer thickness: 0.3mm

Bottom/top pattern: lines

Skin perimeter line count: 0

Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

As a STL file provider, our goal is to ensure that the files are error-free and printable in the most accurate way. This is why we only test print the most difficult segments of 

the model’s parts.

Speed setups:

Infill speed: 30mm/s

Outer shell speed : 30mm/s

Inner shell speed: 20mm/s

Top/bottom speed: 20mm/s

Support speed: 50mm/s

Travel speed: 150mm/s

Skirt speed: 30mm/s

Amount of slower layers: 4

Infill:

Infill pattern: Grid

Line distance: 1.5mm

Infill overlap: 20%

Infill layers: 0

Support:

Enable support: Check

Placement: Everywhere

Overhang angle: 30°

X/Y distance: 0.7mm

Top distance: 0.2mm

Bottom distance: 0.2mm

Stair step height: 0.5mm

Join distance: 0.7mm

Area smoothing: 0.6mm

Use towers: check

Pattern: Grid

Line distance: 1.5mm

LEGAL PRIVACY POLICY: Any UNAUTHORIZED use of my profile, video, pictures or audio in any form or in a forum now or in the future is NOT permissible without my expressed written consent. 

Any act to promote or gain profit in any manner (e.g. either monetarily or socially) from the use of my profile, video, pictures or audio in any form my profile is a violation 

of my privacy and subject to legal action. BY WATCHING THIS: You acknowledge and agree that you shall not post, upload, publish, transmit or make available in any way content of this 

page including images and recording streamed live video available for download. This is intended as, and presented as a one time, live, one view presentation only. 

Penalties of Copyright Infringement: By reproducing, republishing or redistributing the work of a copyright holder without permission, you may be violating or infringing 

on his or her rights under the Copyright Act. The copyright holder may sue for compensation cost from $ 250 to $ 150,000 or one year jail sentence