MICTUNING 6 PACK 12V 30A Fuse Relay Switch Harness Set 5-Pin -Style SPST Relays with 14AWG Hot Wire
 
USA Stock, Super Fast Shipping
 
Features
√ Built in fuse socket with included 30A blade fuse, Space and Money Saving!
√ Style SPDT 12V DC automotive relays with Heavy duty 14AWG hot wires for main contact
√ 40A Contact Switching Capability, Normally Open @30A/14V DC and Normally Close @20A/14V DC.
√ Comes with color-coded wires for loads/accessories Easy Wiring.  
√ Black-Ground (85), Red-VDC (30), White-Trigger (86), Blue-Output N/O (87), Green-Output N/C (87a)
√ Injection molded relays, while the wires are 105℃ heat-resistant, Super Heavy Duty
√ AgSno2 contact material, it has better resistance to arc erosion, also good conductivity!
√ Neat Mounting Design - Unique male-female slot on each socket edge, easy to connect all relays together, Clean & Neat Install
√ Wide Application - Wide range of use, greatly used for car lights, fog lamps, wiper, starter, fans, speakers, traction control systems, etc
 
 
 
Specification
Type: 5-pin Relay Harness with fuse
Rated Voltage: DC 12V
Pull-in Voltage: ≤ 8V DC
Release Voltage: ≤ 1.2V DC
Coil Power Consume: 1.8W
Contact Pole Voltage Drop: 10A≤250mV
Insulation: 100M (500V DC)
Dielectric withstand volt: 500VAC/M
Contact Pole Load: NO:30A/14VDC NC:20A/14VDC
Working Temperature: -40 to 80 ℃
Electrical Durability: 100 thousand times, 1.5s NO / 1.5s OFF
Mechanical Durability: 1 million, 300 times/min
Housing Material: PA66 Nylon
Load Pin Material: H65-Y2
Contact Point Material: Agsno2
 

Description
 
Some automotive devices like horns, starters, headlights need a lot of current to work.If the operating voltage is too high, it's easy to cause an electric shock to operators. If the operating current is high, will generate a lot of heat that burn the switch. So here comes MICTUNING Automotive Relays to handle with high current applications. The automotive relay is in fact an "automatic switch" that controls a large current through a small current, which has the functions of automatic adjustment, safety protection, and conversion circuit.
 

Simple Wiring Guide:
- 85: Connected to the ground chassis. Serves as common ground connection to activate and magnetize the internal coil.
- 86: Connected to a positive 12V DC input. This is where a switch connected to 12V DC input will be connected to the relay.
(When power is sent to the relay through pin 86, the circuit is completed with pin 85 connected to a common ground, which activates and magnetizes the internal coil.)
- 30: Common contact which can be connected to a 12V DC power input.
- 87: Normally open, also known as NO. The connection between pin 87 and pin 30 is only made when the internal coil is activated or magnetized.
- 87a: Normally close, also known as NC. 
 
(Pls feel free to contact us if there's any issue. We'll reply you ASAP and come out a good solution.)


Package Included
6 x Relays
6 x Blade Fuses
6 x Relay Harness
PushAuction