Feature:

1. For amplification, we use the MAX4466, an op amp designed to accomplish this delicate task.
2. With excellent power supply noise rejection, so this amplifier sounds really good and isn't nearly as noisy or scratchy as other mic amp breakouts we've tried.
3. You can set the gain from 25x to 125x, perfect for reading from a microcontroller ADC. The output is rail‑to‑rail so if the sounds gets loudly, the output can go up to 5Vpp.
4. For the best performance, use the "quietest" supply available. The audio waveform will come out of the OUT pin. The output will have a DC bias of VCC/2 so when its perfectly quiet, the voltage will be a steady VCC/2 volts (it is DC coupled). If the audio equipment you're using requires AC coupled audio, place a 100uF capacitor between the output pin and the input of your devices. If you are connecting to an audio amplifier that has differential inputs or includes decoupling capacitors, the 100uF cap is not required.
5. Using it is simple: connect GND to ground, VCC to 2.4-5VDC.
6. The output pin is not designed to drive speakers or anything but the smallest in-ear headphones, you'll need an audio amplifier (such as our 3.7W stereo amp) if you want to connect the amp directly to speakers.


Specification:

Item Type: Microphone Amplifier Module
Power Supply Voltage: + 2.4V to + 5.5V (can be directly connected for /for and other development board)
Power Supply Rejection Ratio: 112dB
Common Mode Rejection Ratio: 126dB
AVOL: 125dB (RL = 100kΩ) Rail-To-Rail Output
Static Supply Current: <24μA
Gain Bandwidth: 600kHz
Size: Approx. 20.8 x 13.8 x 7.5mm / 0.8 x 0.5 x 0.3in


Package List:

1 x Module
1 x Pin Header


1. Our listing price includes the value of goods,packaging cost,and export taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3. The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
4. All disputes arising from the duties will be submitted to ebay for solution.

1. Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.

2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 " in very area
3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy.

https://image-us.ziopt.com/upload/third_resource/image/feedback.jpg


We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

https://image-us.ziopt.com/upload/third_resource/image/shipc73.jpg


On 19-Jun-2024 at 23:43:14 BST, seller added the following information:

DataCaciques