320x240p XPT2046 2.8 inch Raspberry Pi Resistive Touch TFT LCD with Touch Pen

Download 2.8-inch RPi LCD User Manual The 2.8-inch TFT Resistive Touch Screen LCD is compatible with Raspberry Pi. This LCD supports the SPI communication interface. The display has a 4:3 aspect ratio and 320x240p hardware resolution. It has the XPT2046 driver chip embedded controller. The touch pen is also included in the box. The 2.8-inch touch LCD is directly pluggable into Raspberry Pi and has drivers for Raspbian, Ubuntu, and Kali. Features of 320x240p XPT2046 2.8-inch Raspberry Pi TFT Resistive Touch LCD Display Size: 2.8-inch diagonal Touch Control: Resistive Aspect Ratio: 4:3 LCD Type: TFT Resolution: 320x240 pixels hardware resolution Colors: 65536 Interface: SPI communication interface Driver Chip: XPT2046 embedded controller Board Compatibility: Raspberry Pi boards Software Compatibility: Drivers included for Raspbian, Ubuntu, and Kali FBCP: Configurable dual display settings and software resolution with FBCP software driver Virtual Keyboard Support: This feature turns ON the interactive virtual keyboard (works only when Raspberry Pi is connected) Backlight: LED Controls: 4x User Keys Plating: Immersion Gold Plating Weight: 67 Grams Dimensions: 85.01 x 56.44 (mm) | 8.501 x 5.644 (cm) Items Included 1x Resistive Touch TFT LCD 2.8-inch 1x Touch Pen 1x Screw Pack 1x Quick Start Guide What if the Display doesn’t support Raspbian? The first thing you need to verify is the legitimacy of the image. Only the official Raspbian image is recommended. Install the driver first and then try running the display with the image already provided. What if the Display doesn’t support the Waveshare Image? If the display does not seem to work with the Waveshare Image, you need to check all the connections. If everything seems alright, check the TF and see if the burning process displays any errors. Ideally, the ACT must blink and PWR must be ON. If both LEDs are ON but ACT is not blinking, it indicates the connection error with the TF Card. Check the card’s connection and connect it again making sure that the contact is established in the right way. Power Supply Compatible with this Display Unit This display unit is compatible with a 5V/3A power supply adapter. This is a small display so it will not cause problems for the Raspberry Pi board to get started. Sometimes, the Raspberry Pi board doesn’t start but it happens in the case when you connect a large (over 10-inch) display. Large displays often need a stand-alone power supply. But you will not face such issues with small-size display units.

320x240p XPT2046 2.8 inch Raspberry Pi Resistive Touch TFT LCD with Touch Pen

Download 2.8-inch RPi LCD User Manual

The 2.8-inch TFT Resistive Touch Screen LCD is compatible with Raspberry Pi. This LCD supports the SPI communication interface. The display has a 4:3 aspect ratio and 320x240p hardware resolution. It has the XPT2046 driver chip embedded controller. The touch pen is also included in the box. The 2.8-inch touch LCD is directly pluggable into Raspberry Pi and has drivers for Raspbian, Ubuntu, and Kali.

Features of 320x240p XPT2046 2.8-inch Raspberry Pi TFT Resistive Touch LCD

Display Size: 2.8-inch diagonal
Touch Control: Resistive
Aspect Ratio: 4:3
LCD Type: TFT
Resolution: 320x240 pixels hardware resolution
Colors: 65536
Interface: SPI communication interface
Driver Chip: XPT2046 embedded controller
Board Compatibility: Raspberry Pi boards
Software Compatibility: Drivers included for Raspbian, Ubuntu, and Kali
FBCP: Configurable dual display settings and software resolution with FBCP software driver
Virtual Keyboard Support: This feature turns ON the interactive virtual keyboard (works only when Raspberry Pi is connected)
Backlight: LED
Controls: 4x User Keys
Plating: Immersion Gold Plating
Weight: 67 Grams
Dimensions: 85.01 x 56.44 (mm) | 8.501 x 5.644 (cm)

Items Included

1x Resistive Touch TFT LCD 2.8-inch
1x Touch Pen
1x Screw Pack
1x Quick Start Guide

What if the Display doesn’t support Raspbian?

The first thing you need to verify is the legitimacy of the image. Only the official Raspbian image is recommended. Install the driver first and then try running the display with the image already provided.

What if the Display doesn’t support the Waveshare Image?

If the display does not seem to work with the Waveshare Image, you need to check all the connections. If everything seems alright, check the TF and see if the burning process displays any errors. Ideally, the ACT must blink and PWR must be ON. If both LEDs are ON but ACT is not blinking, it indicates the connection error with the TF Card. Check the card’s connection and connect it again making sure that the contact is established in the right way.

Power Supply Compatible with this Display Unit

This display unit is compatible with a 5V/3A power supply adapter. This is a small display so it will not cause problems for the Raspberry Pi board to get started. Sometimes, the Raspberry Pi board doesn’t start but it happens in the case when you connect a large (over 10-inch) display. Large displays often need a stand-alone power supply. But you will not face such issues with small-size display units.