TACTICAL RADIO GEAR, CORP.

LPF-2000W

Low Pass Filter 1.8 – 30MHz

2000 WATT

          Tactical Radio Gear’s, LPF-2KW low pass filters, are intended to suppress TVI, RFI, and other sources of interference by eliminating unwanted EMI.

          Harmonics that cause TVI difficulties, can be virtually eliminated, with this filter, keeping your neighbors pleased, while you enjoy your ham radio hobby. 

SPECIFICATIONS

RF Connector Type: UHF female (SO-239) others available on request.

Filter Impedance: 50 ohms

Filter Frequency Range: 1.8-30 MHz

Cutoff Frequency: 30 MHz

Attenuation: >55 dB at 145 MHz

Pass Band Insertion Loss: <0.5 dB@ 30MHz

Power Capacity: 2000 W @ 100% Duty

VSWR: <1.2

Size: 1.8"W x 1.7”H x 4.0” D inches.

          Tactical Radio Gear, LPF-200W (Low Pass Filters) are commercial grade, multi-element filter, designed with the highest quality components, to remove both image and harmonic interference, in-order to suppress TVI and interference to other radio services.

          The LPF-2000W, HF transmit Low Pass Filters, achieve outstanding suppression, which effectively eliminates out of band noise and interfering signals. The real advantages, of the LPF-200W, when used between the transmitter and Antenna; amplifier or Tuner, is the virtual removal of (TVI) from transmitters operating above 30 MHz.

the Tactical Radio Gear, Low Pass Filter is designed for power levels up to 2 K W of power a t a frequency of 1.8 to 30 MHz.
The purpose of the Low Pass Filter is to reduce possible interference from your transmitter/amplifier to television or other services above 30 MHz. This 9-pole filter has a low insertion loss, not more than .5 dB from 1.8 to 30 MHz; with exceptional attenuation above 30 MHz.  The LPF-2000W provides extremely low loss.