10.3 inch Flexible E Ink Display HAT for Raspberry Pi 1872x1404p Black and White

The Flexible E-Ink Display HAT for Raspberry Pi uses the IT8951 controller. The display resolution is 1872x1404 pixels. This E-Ink Display HAT supports USB, SPI, I80, and I2C interfaces. You can bend the e-Paper Panel easily but make sure to NEVER bend the FPC. The 10.3-inch Flexible E-Ink Display HAT for Raspberry Pi is ideal for industrial instruments and eBook Reader. The display is Black & White. Features of 10.3-inch Flexible E-Ink Display HAT for Raspberry Pi Think and flexible e-Paper Partial Refresh No backlight (Ultra-low-power) Compatible with 40Pin Standard Raspberry Pi GPIO Supports USB, I80, I2C, and SPI interfaces Resources and manual included for Raspberry Pi and STM32 SPI Pin Definition  Specifications of 10.3-inch Flexible E-Ink Display HAT for Raspberry Pi ·         Operating Voltage 5V ·         Interface Support I2C, SPI, I80, USB ·         Resolution 1872x1404 pixels ·         Color High-Contrast Black & White ·         Dot-Pitch 0.112mm x 0.112mm ·         Full-Refresh Time 450ms ·         Refresh Power (typ.) 2W ·         Standby Power (Total) (typ.) 1W ·         View Angle > 170o ·         GrayScale 1-4 Bit 2-16 ·         Dimensions (Display) 209.664mm x 165.8mm x 0.647mm ·         Outline Dimensions 227.7mm x 165.8mm x 0.647mm Items Included 1x e-Paper (D) 10.3-inch 1x Adapter for e-Paper 1x 20cm PH2.0 8Pin 1x IT8951 e-Paper Driver HAT 1x FCC 33-Pin Same-Side-Contact 1x Type-A to Micro B USB Cable 2x Raspberry Pi Screws This offer does NOT include Raspberry Pi.