Description
DDTS380 400KG.CM High Torque Servo Ideal UAV Precision Industrial Steering Servo Remote Control
Product Features:
* Applicable to servo controller, model airplane remote control
* Alloy gear high torque motor
* Aluminum alloy gearbox is ultra-lightweight
* Easy to install, durable, reliable, stable and practical
Application Range:
* Large robots, mechanical arm power joints
* Industrial robot automation
* Precise control of valve angle
* Large camera pan/tilt
* Large remote control car model, remote control ship model
Attention:
Please test various application scenarios by yourself, and use them after the test is qualified. Please use large-scale testing for various application scenarios by yourself. We are not responsible for the consequences of this!
Technical Parameters:
- Rated voltage: DC24V (12V-24V can work, 12V torque and speed are halved)
- No-load current: <500MA (load current 5-10A, it is recommended to use 10A or more than 10A switching power supply or battery, the greater the power supply current output capacity, the better. Battery is not included)
- Limit angle: 1200US-1700US: about 90 degrees. 500US-2500US: about 288 degrees (the pulse width determines the angle, if you need other angles, please increase or decrease the pulse width by yourself, the maximum is about 288 degrees)
- Control method: PWM pulse width modulation signal, frequency 50HZ, period 20MS. Signal voltage: 3.3V-5V. (Pulse frequency: 50-333HZ)
- Material: Gear and shaft: alloy steel, hardened steel, aluminum alloy; shell: aluminum alloy
- Weight: about 880g
- Speed: 0.5S/60°(equivalent to 20RPM)
- Mechanical life: >300,000 times (370 hours)/(30KG/CM)
- Limit torque: 400KG/CM (tooth chipping load, it is not recommended to work at this torque)
- Starting torque: 380KG/CM (short-time work)
- Conventional torque: 140KG/CM (can work for a long time)
Package Included:
- 1 x Servo
Note:
- Battery and other items pictured are not included in the package, for demonstration purposes only. Thank you for your understanding!
Wiring Diagram (when using R/C receiver):
- The five lines are drawn from the DDTS380 servo.
- Three of the five wires: orange is the signal, red is the empty pin, and brown is the ground wire. Used to connect to the control signal of the receiver or servo controller. It can be directly connected to the receiver for FUTABA or JR.
- In addition, you must prepare a separate 24V power supply to drive the servo. The red wire is the positive pole and the black wire is the negative pole. Please note that our servo can work with 12V-24V voltage, but the lower the voltage, the slower the speed and the smaller the torque. The marked torque value and speed value are both the value of 24V power supply.
- If only power is supplied and no signal is input, the servo will not move and will not output torque!
- If you only supply power and remove the signal during use, the servo will not move and will not output torque!
- When powering on, please connect the signal first, and then supply power to the servo. When shutting down, please turn off the power first, and then turn off the signal! This is the normal operating procedure.
Product Features:
* Applicable to servo controller, model airplane remote control
* Alloy gear high torque motor
* Aluminum alloy gearbox is ultra-lightweight
* Easy to install, durable, reliable, stable and practical
Application Range:
* Large robots, mechanical arm power joints
* Industrial robot automation
* Precise control of valve angle
* Large camera pan/tilt
* Large remote control car model, remote control ship model
Attention:
Please test various application scenarios by yourself, and use them after the test is qualified. Please use large-scale testing for various application scenarios by yourself. We are not responsible for the consequences of this!
Technical Parameters:
- Rated voltage: DC24V (12V-24V can work, 12V torque and speed are halved)
- No-load current: <500MA (load current 5-10A, it is recommended to use 10A or more than 10A switching power supply or battery, the greater the power supply current output capacity, the better. Battery is not included)
- Limit angle: 1200US-1700US: about 90 degrees. 500US-2500US: about 288 degrees (the pulse width determines the angle, if you need other angles, please increase or decrease the pulse width by yourself, the maximum is about 288 degrees)
- Control method: PWM pulse width modulation signal, frequency 50HZ, period 20MS. Signal voltage: 3.3V-5V. (Pulse frequency: 50-333HZ)
- Material: Gear and shaft: alloy steel, hardened steel, aluminum alloy; shell: aluminum alloy
- Weight: about 880g
- Speed: 0.5S/60°(equivalent to 20RPM)
- Mechanical life: >300,000 times (370 hours)/(30KG/CM)
- Limit torque: 400KG/CM (tooth chipping load, it is not recommended to work at this torque)
- Starting torque: 380KG/CM (short-time work)
- Conventional torque: 140KG/CM (can work for a long time)
Package Included:
- 1 x Servo
Note:
- Battery and other items pictured are not included in the package, for demonstration purposes only. Thank you for your understanding!
Wiring Diagram (when using R/C receiver):
- The five lines are drawn from the DDTS380 servo.
- Three of the five wires: orange is the signal, red is the empty pin, and brown is the ground wire. Used to connect to the control signal of the receiver or servo controller. It can be directly connected to the receiver for FUTABA or JR.
- In addition, you must prepare a separate 24V power supply to drive the servo. The red wire is the positive pole and the black wire is the negative pole. Please note that our servo can work with 12V-24V voltage, but the lower the voltage, the slower the speed and the smaller the torque. The marked torque value and speed value are both the value of 24V power supply.
- If only power is supplied and no signal is input, the servo will not move and will not output torque!
- If you only supply power and remove the signal during use, the servo will not move and will not output torque!
- When powering on, please connect the signal first, and then supply power to the servo. When shutting down, please turn off the power first, and then turn off the signal! This is the normal operating procedure.
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
On Jun-17-21 at 20:00:59 PDT, seller added the following information: