Full System Diagnoses, Won't Miss Any Leak. Crankcase System Test: Excessive pressure or corrosion of the crankcase is the main reason to damage the seal of the crankcase and cause oil leakage. Intake System Test: Leakage in the air intake system will lead to insufficient intake of the car engine, which will result in scant engine power. Car Sealing Test: Poor airtightness of the car may lead to a lot of inconvenience like inability to keep warm, not soundproof, not waterproof and not dust-proof, etc. Fuel Tank System Test: When there are gaps in the fuel tank and piping caused by improper installation or insufficient sealing of the fuel tank cap, it can cause leaks in the fuel tank system. Turbo Test: The leakage of coolant would cause the engine to report high water temperature. Various Pipe Fitting Test: Smoke testing of brake hoses, power steering hoses, cooling system hoses, air conditioning system hoses, turbocharger hoses, fuel hoses, intake and exhaust system hoses, etc. EVAP System Test: Leakage of the fuel evaporation system will cause fuel vapor to leak into the atmosphere, causing waste and pollution or unstable engine idling. Exhaust System Test: Unpurified harmful gases to be discharged into the atmosphere or increase vehicle noise is the main disadvantage when leaks happened in the exhaust. |
Fast Smoke Output It can produce smoke instantly by heating up USP mineral oil or baby oil. 4ft Smoke Outlet Pipe can help reach and connect perfectly. | Overheat & Anti-frost Protection: Built in self-protective systemV3 EVAP vacuum tester is equipped with the latest intelligent protection device. When the temperature of the device exceeds 70 degrees Celsius, the power protection device will be intelligently activated to turn it off, to ensure the safety of the operator and the device. The device is also suitable for low temperature operation. | Wide Compatibility: Suitable for all vechicles It is suitable for all makes and models of cars. |
Specifications Output pressure: 8-12psi Output flow: 4L/Min Power supply: 12V Air source: built-in Air pressure output: built-in air pump Test oil capacity: 10ml Main Unit Dimensions: 110x155x230mm/4.33x6.1x9.05inch Package weight: 3.7kg/8.15lb | How To Use: 1. Unscrew the oil filler cap and add test oil. 2. Connect the car battery, turn on the air pump and smoke generator. 3. Connect the smoke hose to the pipeline to be tested through the adapter. 4. The leak can be judged according to where the smoke appears. | Package 1pc* AUTOOOL SDT106 automotive smoke leak detector main unit 1pc* Power cord clamp 1pc* Smoke hose 1pc* Test oil bottle 1pc* Rubber connector part 1pc* Hook 1pc* User manual |