Description:
600w step up
Input voltage : 10V -60V
Input Current: Maximum input current of 15A
Output voltage : 12V -80V continuously adjustable
Output current: maximum output current of 10A ( adjustable )
Output power: the effective power P = input voltage V * 10A
Conversion efficiency: up to 95% ( input voltage, current; output voltage and current impact of conversion efficiency )
Short circuit protection : Fuse
Weight :251g
3.5-30V to 4.0-30V 5A
1.Input voltage range: 3.5V-30V (output set voltage higher than the input voltage must be guaranteed)
2.Output voltage range: 4.0V-30V
3.Input maximum current: 5A (based on power conservation under nominal conditions the output current
Uin * Iin * efficiency = Uout * Iout)
5.Continuous operating current: 3A (good ventilation conditions, the output voltage and input voltage ratio can not be greater than 3)
6.Around 90% of the full load efficiency
Application examples:
The 7.4V boost 12V applications in Aeromodelling camera.
Efficient booster circuit adjustable DC-DC boost the input voltage (4 to 30) V
adjustable output (5 to 30) the V input Maximum input current 5A efficiency up to 92%,
using the dedicated package boost chip beyond the LM2577,
not bean large boost IC performance and output drive power up to 30W.
4.5V-32V to 5-42V 6A
Module property:Non-isolated step up module(boost)
Input voltage:4.5V-32V
Input current:0A-6A
Output voltage:5V-42V
Output current:0A-6A
Working temperature:-40℃~+85℃
Working frequency:180KHz
Transfer efficiency:94%(max)
Short circuit protection:Yes
Over temperature protection:Yes
Input reverse protection:NO
PCB size:60x60x20mm
8A step up
The isolation booster module
The highest conversion efficiency：96%
Input voltage：6~32（max 35V）
Output voltage: 6~42（max 52V）
Maximum input current: 8A
maximum current output: 5A
Static working current: 15mA
Power :70W
To adapt to the environment:-40~+85℃
Working frequency: 150KHz
Characterization:
Adopt high-frequency electrolytic capacitor reduce the ripple value, more stable output voltage;
Provide reverse connect protection, avoid the equipment damage caused by incorrect operation;
Stops booster, soft short circuit protection, short circuit, automatic recovery when short circuit faults remove;
With access to electricity, the LED indicator light, easy to understand
way to install：4*M3 screw
Connection mode: welding output terminals free
Module size: 30 mm high 20 mm long 60 mm wide
600w step up
Input voltage : 10V -60V
Input Current: Maximum input current of 15A
Output voltage : 12V -80V continuously adjustable
Output current: maximum output current of 10A ( adjustable )
Output power: the effective power P = input voltage V * 10A
Conversion efficiency: up to 95% ( input voltage, current; output voltage and current impact of conversion efficiency )
Short circuit protection : Fuse
Weight :251g
3.5-30V to 4.0-30V 5A
1.Input voltage range: 3.5V-30V (output set voltage higher than the input voltage must be guaranteed)
2.Output voltage range: 4.0V-30V
3.Input maximum current: 5A (based on power conservation under nominal conditions the output current
Uin * Iin * efficiency = Uout * Iout)
5.Continuous operating current: 3A (good ventilation conditions, the output voltage and input voltage ratio can not be greater than 3)
6.Around 90% of the full load efficiency
Application examples:
The 7.4V boost 12V applications in Aeromodelling camera.
Efficient booster circuit adjustable DC-DC boost the input voltage (4 to 30) V
adjustable output (5 to 30) the V input Maximum input current 5A efficiency up to 92%,
using the dedicated package boost chip beyond the LM2577,
not bean large boost IC performance and output drive power up to 30W.
4.5V-32V to 5-42V 6A
Module property:Non-isolated step up module(boost)
Input voltage:4.5V-32V
Input current:0A-6A
Output voltage:5V-42V
Output current:0A-6A
Working temperature:-40℃~+85℃
Working frequency:180KHz
Transfer efficiency:94%(max)
Short circuit protection:Yes
Over temperature protection:Yes
Input reverse protection:NO
PCB size:60x60x20mm
8A step up
The isolation booster module
The highest conversion efficiency：96%
Input voltage：6~32（max 35V）
Output voltage: 6~42（max 52V）
Maximum input current: 8A
maximum current output: 5A
Static working current: 15mA
Power :70W
To adapt to the environment:-40~+85℃
Working frequency: 150KHz
Characterization:
Adopt high-frequency electrolytic capacitor reduce the ripple value, more stable output voltage;
Provide reverse connect protection, avoid the equipment damage caused by incorrect operation;
Stops booster, soft short circuit protection, short circuit, automatic recovery when short circuit faults remove;
With access to electricity, the LED indicator light, easy to understand
way to install：4*M3 screw
Connection mode: welding output terminals free
Module size: 30 mm high 20 mm long 60 mm wide
8.5-48V to 10-50V 10A
Module name :250W boost constant current module
Module properties: non-isolated step-up module (BOOST)
Input voltage: DC8.5V-48V
Input current: 10A (MAX) exceeds 8A please enhance heat dissipation
Quiescent current: 10mA (12V liter 20V, the output voltage, the higher
the current will increase too quiet)
Output voltage: 10-50V continuously adjustable
Constant] range: 0.2-8A
Temperature: -40 to + 85 degrees (ambient temperature is too high, please enhance heat dissipation)
Operating frequency: 150KHz
Conversion efficiency: up to 96%
Overcurrent protection: There
Input reverse polarity protection: Yes,
Installation: 4 3mm screw holes
Connection method: Connection Output
Module size: Length 70mm width 36mm height 13mm
Single module: 50 g
- LCD screen with white characters and a blue background displays two groups of voltage and current simultaneously.
- Uses a standard DC-Socket (5.5/2.1) input
- Coarse and fine tuning positioner for precise voltage regulation.
- Input voltage 9-24V (max. 30V), reverse polarity protection
- Two groups of current can work simultaneously without conflict.
- Adjustable voltage available on DuPont connectors and terminal blocks which can be tightened with screws.
- Output voltage adjustable from 0.8V to 20V, max. 2A load with short circuit protection.
- Fixed 5V Output available on USB- and DuPont-Connectors. Max. 2A load with short circuit protection.
- Over 90% efficiency rate (related to the input and output voltage, current and dropout)
- Size: 80mm*80mm*25mm.
-Weight: about 85 grams.
Operation: Powers on automatically when power is attached. Use the “Power”-Button to switch off and on again.
Automatic zero-calibration may be less accurate with the age of the product, due to component aging and environmental temperature changes.
Calibration Mode: Disconnect power and all loads. Press the “Power”-Button and keep it pressed while connecting Power. The automatic zero-calibration will be performed. On success, the LCD will display 0.
Package Included:
1PCS X DC Powe Supply with box
Free Alligator clip / 5.5mm
Free DC connector
Free 60cm red / black power cables
Module name :250W boost constant current module
Module properties: non-isolated step-up module (BOOST)
Input voltage: DC8.5V-48V
Input current: 10A (MAX) exceeds 8A please enhance heat dissipation
Quiescent current: 10mA (12V liter 20V, the output voltage, the higher
the current will increase too quiet)
Output voltage: 10-50V continuously adjustable
Constant] range: 0.2-8A
Temperature: -40 to + 85 degrees (ambient temperature is too high, please enhance heat dissipation)
Operating frequency: 150KHz
Conversion efficiency: up to 96%
Overcurrent protection: There
Input reverse polarity protection: Yes,
Installation: 4 3mm screw holes
Connection method: Connection Output
Module size: Length 70mm width 36mm height 13mm
Single module: 50 g
9-24V 8V to 20V 2A(Brand New Factory Supply Products)
- LCD screen with white characters and a blue background displays two groups of voltage and current simultaneously.
- Uses a standard DC-Socket (5.5/2.1) input
- Coarse and fine tuning positioner for precise voltage regulation.
- Input voltage 9-24V (max. 30V), reverse polarity protection
- Two groups of current can work simultaneously without conflict.
- Adjustable voltage available on DuPont connectors and terminal blocks which can be tightened with screws.
- Output voltage adjustable from 0.8V to 20V, max. 2A load with short circuit protection.
- Fixed 5V Output available on USB- and DuPont-Connectors. Max. 2A load with short circuit protection.
- Over 90% efficiency rate (related to the input and output voltage, current and dropout)
- Size: 80mm*80mm*25mm.
-Weight: about 85 grams.
Operation: Powers on automatically when power is attached. Use the “Power”-Button to switch off and on again.
Automatic zero-calibration may be less accurate with the age of the product, due to component aging and environmental temperature changes.
Calibration Mode: Disconnect power and all loads. Press the “Power”-Button and keep it pressed while connecting Power. The automatic zero-calibration will be performed. On success, the LCD will display 0.
Package Included:
1PCS X DC Powe Supply with box
Free Alligator clip / 5.5mm
Free DC connector
Free 60cm red / black power cables