FastWarm 200W Electric Underfloor Heating Mat

FastWarm® 200w heating mat kits are industry leading heating systems that can be used as a primary heat source (when used in conjunction with FastWarm® XPS or Tile backer boards, the warm up time and running costs can be reduced as much as 25%) providing an effective solution to radiant heating under almost any floor covering and in any room type including high heat loss areas such as conservatories.

FastWarm® heating mats comprise of the thinnest (2mm) fluoropolymer (Teflon) coated, dual-core resistive heating cable on the market. The cables are evenly spaced at 50mm intervals to provide an even heat distribution across the floor to suit the required heat output. The mat system also allows for use in small confined areas (bathrooms and en suites) plus larger areas, making fitting a FastWarm® underfloor heating cable suitable for any DIY enthusiast. Please note; all electrical connections should be undertaken by a qualified electrician.

FastWarm® 200w heating mat kits come with everything required to install the FastWarm® underfloor heating system, meaning there is no need for any additional components. Everything you need in a box.

FastWarm® 200w heating mat kits come with a peace of mind lifetime guarantee (50 years) as we only use the highest quality components sourced across the globe. FastWarm® heating cables do not utilise PVC as an outer coating which are an inferior casing, meaning you can rest assured that once installed, your FastWarm® underfloor heating system will last a lifetime.

FastWarm® loose 200w mat kits Include the following.

FastWarm® Mat 200w Mat(s)

(1m2 - 12m2 = 1 Mat)
(12m2 - 18m2 = 2 Mats)

1 x FastWarm® Programmable Thermostat

(Choice of Digital, Touchscreen and WiFi controllers in white or black) All supplied with a 3m floor sensor probe

FastWarm® FastPrime Primer

(A water based acrylic primer, which is used to prime the substrate/insulation board to aid bonding and reduce moisture)

1 x Roller and Foam head.

For applying the FastPrime Primer

Heat resistant duct tape

To aid installation and fix any loose laid heating cable

1 x 2m Conduit length

Used to house the floor sensor probe.

Please note that electric underfloor heating elements cannot be shortened/cut so when calculating the correct size for an area please select a cable system that only covers up to 90% of the total floor space.