Handy, functional and informative interface.
Diagnostics and repair
more than 18 ANTMINER models. From the simplest and most common, to the latest
in mining industry, including newest developments from Bitmain:
L3+, L7, S9, S9k, S9se, S11, Z11, S15, T15, S17, T17, S17pro, T17pro, S17+, T17+,
S17e, T17e, S19, T19, S19pro, S19j Pro, S19J, S19 XP, S21, T21, S19k Pro all others BITMAIN models
EEPROM flashing of any
of the supported models takes less than 30 seconds. It is performed without
computer, additional programmer or power supply for the hash-board.
Hashboard model automatic detection.
EEPROM firmware integrity check.
Display of the board parameters recorded in the EEPROM firmware (voltage, frequency, serial number), with the ability to edit.
Ability to change EEPROM firmware template saved in the tester for quick and convenient flashing of multiple devices without using the web interface.
During testing, the
board doesn't get under full load, that means additional cooling is not needed.
The board is diagnosed on the engineer's desk without the time and effort
required to install and remove the board from the miner case.
Asic Repair Center
helps to determine which exact chip is not working on a hash-board and how many
chip failures have occurred, simplifying the repair process and reducing repair
time by 6 times.
Instant switch between
models, tester functions and an intuitive interface allow you to diagnose a
large number of different hash-boards in a short period of time and not be
distracted.
ESD protection allows
you to safely "hot-plug" the board and not waste time disconnecting
and reconnecting power to the board and tester.
The model of the board can be changed
with lightning speed! Just turn the selector on the tester or pick the model
you need from the according menu in the web interface and you are ready to go.
You no longer need to have several
testers and switch between them. You don't need to swap SD cards and wait for
tester to load, wasting your time. Now you can just turn the selector knob!
If you repair and support more then one
model, it will save another hour a day!
Exact map of chip placement.
Chip map mimics the real miner hash-board, therefore
saving your time on looking for faulty chip on every repair. You just need to
find the highlighted one and start diagnostics!
You don't have to remember every chip placement or
look at the scheme every time. Our map will do that for you!
If you repair around 50 chips per day, this function
will help to save up to 1 hour, meaning you will be able to perform more
repairs!
Web interface displays history of all malfunctioning
chips during the test. You will be able to get the information
on:
This function would make it impossible for you to miss
a malfunction, and will make repairs more convenient, demonstrative and
reliable.
Asic Repair Center is powered by a
standard USB type-c, which means you can power it from any adapter, laptop or
even a powerbank! You don't need another power adapter, we'll give mobility and
movement freedom instead!
All status data is shown on the display
of the tester.
Asic Repair Center can be used even
without the web interface. You still won't miss any information.