Package include:

1× SDF08NK8X Servo Drive

1× 750W 80F-0230GDL-Z AC Servo Motor with brake

1x DB25 hole plug and shell

1 x 3m Power Cable with Plug

1 x 3m Encoder Cable with Plug

Parameters of the motor

Model: 80F-0230GDL-Z

Power: 0.75KW

Number of poles: 5

Rated power supply: 220V

Rated speed: 3000r/min

Rated torque: 2.39Nm

Rated current: 4.8A

With brake: Yes

Parameters of the driver

Model: SDF08NK8X

Maximum current: 8.9A

Input voltage: AC170-253V (50/60Hz)

Cooling method: radiating air cooling

Control mode: SVPWM control

Encoder: 17-bit single-turn absolute value optical encoder

Operating temperature: 0℃~+55℃

Storage temperature: -20℃-80℃

Protection level: IP54

3). 1000W 1KW without brake:

Package include:

1× SDF08NK8X Servo Drive

1× 1KW 80F-0330GDL AC Servo Motor without brake

1x DB25 hole plug and shell

1 x 3m Power Cable with Plug

1 x 3m Encoder Cable with Plug

Parameters of the motor

Model: 80F-0330GDL

Power: 1KW

Number of poles: 5

Rated power supply: 220V

Rated speed: 3000r/min

Rated torque: 3.18Nm

Rated current: 5.4A

With brake: No

Parameters of the driver

Model: SDF08NK8X

Maximum current: 8.9A

Input voltage: AC170-253V (50/60Hz)

Cooling method: radiating air cooling

Control mode: SVPWM control

Encoder: Encoder:  17-bit single-turn absolute value optical encoder

Operating temperature: 0℃~+55℃

Storage temperature: -20℃-80℃

Protection level: IP54

4). 1000W 1KW with brake:

Package include:

1× SDF08NK8X Servo Drive

1× 1KW 80F-0330GDL-Z AC Servo Motor with brake

1x DB25 hole plug and shell 

1 x 3m Power Cable with Plug

1 x 3m Encoder Cable with Plug

Parameters of the motor

Model: 80F-0330GDL-Z

Power: 1KW

Number of poles: 5

Rated power supply: 220V

Rated speed: 3000r/min

Rated torque: 3.18Nm

Rated current: 5.4A

With brake: Yes

Parameters of the driver

Model: SDF08NK8X

Maximum current: 8.9A

Input voltage: AC170-253V (50/60Hz)

Cooling method: radiating air cooling

Control mode: SVPWM control

Encoder:  17-bit single-turn absolute value optical encoder

Operating temperature: 0℃~+55℃

Storage temperature: -20℃-80℃

Protection level: IP54

5). 1500W 1.5KW without brake:

Package include:

1× SDF20NK5X Servo Driver

1× 1.5KW 110F-0625TDL AC Servo Motor without brake

1x DB25 hole plug and shell 

1 x 3m Power Cable with Plug

1 x 3m Encoder Cable with Plug

Parameters of the motor

Model: 110F-0625TDL

Power: 1.5KW

Number of poles: 5

Rated power supply: 220V

Rated speed: 2500r/min

Rated torque: 5.73Nm

Rated current: 6.8A

Parameters of the driver

Model: SDF20NK5X

Maximum current: 18A

Input voltage: AC170-253V (50/60Hz)

Cooling method: radiating air cooling

Control mode: SVPWM control

Encoder:  17-bit single-turn absolute value optical encoder

Operating temperature: 0℃~+55℃

Storage temperature: -20℃-80℃

Protection level: IP54

6). 1500W 1.5KW with brake:

Package include:

1× SDF20NK5X Servo Drive

1× 1.5KW 110F-0625TDL-Z AC Servo Motor without brake

1x DB25 hole plug and shell 

1 x 3m Power Cable with Plug

1 x 3m Encoder Cable with Plug

Parameters of the motor

Model: 110F-0625TDL-Z

Power: 1.5KW

Number of poles: 5

Rated power supply: 220V

Rated speed: 2500r/min

Rated torque: 5.73Nm

Rated current: 6.8A

Parameters of the driver

Model: SDF20NK5X

Maximum current: 18A

Input voltage: AC170-253V (50/60Hz)

Cooling method: radiating air cooling

Control mode: SVPWM control

Encoder:  17-bit single-turn absolute value optical encoder

Operating temperature: 0℃~+55℃

Storage temperature: -20℃-80℃

Protection level: IP54

750W without brake:

---

Product Description

Package include: 1× SDF08NK8X Servo Drive 1× 750W 80F-0230GDL AC Servo Motor without brake 1x DB25 hole plug and shell 1 x 3m Power Cable with Plug 1 x 3m Encoder Cable with Plug Pdf. user manual	Parameters of the motor Parameters of the motor: Model: 80F-0230GDL Power: 750W Number of poles: 5 Rated power supply: 220V Rated speed: 3000r/min Peak speed:6000r/min Rated torque: 2.39Nm Instantaneous maximum torque:7.17Nm Rated current: 4.8A	Torque & Speed Diagram With brake: No Back emf:34 V/1000rpm Torque constant: 0.54N.m/A Line resistance: 1.08Ohms D axis inductance: 2.1mH Q axis inductance: 2.5mH Electrical time constant: 3.89ms Rotor inertia: 1.48 10-4kg·m² Insulation class: F(155℃) Waterproof grade: IP65

Motor dimension drawing

Application

Application areas: Industrial manipulator,Semiconductor equipment,Engraving equipment,Measuring equipment,Medical equipment,robot and other automated equipment on the market.

750W with brake:

Product Description

Package include 1× SDF08NK8X Servo Drive 1× 750W 80F-0230GDL-Z AC Servo Motor with brake 1x DB25 hole plug and shell 1 x 3m Power Cable with Plug 1 x 3m Encoder Cable with Plug Pdf. user manual	Parameters of the motor Model: 80F-0230GDL-Z Power: 750W Number of poles: 5 Rated power supply: 220V Rated speed: 3000r/min Peak speed:6000r/min Rated torque: 2.39Nm Instantaneous maximum torque:7.17Nm Rated current: 4.8A	Torque & Speed Diagram With brake: Yes Back emf:34 V/1000rpm Torque constant: 0.54N.m/A Line resistance: 1.08Ohms D axis inductance: 2.1mH Q axis inductance: 2.5mH Electrical time constant: 3.89ms Rotor inertia: 1.78 10-4kg·m² Insulation class: F(155℃) Waterproof grade: IP65

Motor dimension drawing

1000W without brake:

Product Description

Package included 1× SDF08NK8X Servo Drive 1× 1KW 80F-0330GDL AC Servo Motor without brake 1x DB25 hole plug and shell 1 x 3m Power Cable with Plug 1 x 3m Encoder Cable with Plug Pdf. user manual	Parameters of the motor Model: 80F-0330GDL Power: 1000W Number of poles: 5 Rated power supply: 220V Rated speed: 3000r/min Peak speed:6000r/min Rated torque: 3.18Nm Instantaneous maximum torque: 9.54Nm Rated current: 5.8A	Torque & Speed Diagram With brake: No Back emf:34 V/1000rpm Torque constant: 0.55N.m/A Line resistance: 0.73Ohms D axis inductance: 2.7mH Electrical time constant: 3.7ms Rotor inertia: 2.27 (X10-4kg·m²) Insulation class: F(155℃) Waterproof grade: IP65

Motor dimension drawing

1000W with brake:

Product Description

Package included 1× SDF08NK8X Servo Drive 1× 1KW 80F-0330GDL-Z AC Servo Motor with brake 1x DB25 hole plug and shell 1 x 3m Power Cable with Plug 1 x 3m Encoder Cable with Plug Pdf. user manual	Parameters of the motor Model: 80F-0330GDL-Z Power: 1000W Number of poles: 5 Rated power supply: 220V Rated speed: 3000r/min Peak speed:6000r/min Rated torque: 3.18Nm Instantaneous maximum torque: 9.54Nm Rated current: 5.8A	Torque & Speed Diagram With brake: Yes Back emf:34 V/1000rpm Torque constant: 0.55N.m/A Line resistance: 0.73Ohms D axis inductance: 2.7mH Electrical time constant: 3.7ms Insulation class: F (155℃) Waterproof grade: IP65

Motor dimension drawing

Parameters of the driver Model: SDF08NK8X Maximum current: 10.5A Input voltage: AC170-253V (50/60Hz) Cooling method: Heat dissipation air cooling Control mode: SVPWM control Encoder: 17 bit absolute photoelectric encoder Operating temperature: 0℃~+55℃ Storage temperature: -20℃-80℃ Protection level: IP54	Parameters of the driver Control model: Position control/speed control/torque control/inching operation/RS485 communication Braking function: Built-in Display and operation: Six digit seven segment display LED,four function operation	Parameters of the driver Protective function: Undervoltage, overvoltage, overload, overcurrent, encoder abnormality, braking, position out of tolerance, etc. Command control mode: external pulse External command pulse input form: pulse+square, double pulse, A/B quadrature Speed control range Speed regulation ratio: 1:5000

SDF Series Driver Position control mode wiring diagram (24V single-ended input signal)

Note:

The functions of input port 1-input port 6 can be defined; please refer to PN1110-PN116 parameters for details.

The function of output port 1-output port 3 can be defined;please refer to PN70-PN72 parameters for details.

Position control model

• Command control model: External pulse
• External command pulse input:
• Form: pulse+ direction cw/ccw A/B orthogonality
• Maximum frequency differential motion: 1MHZ open collector: 200KHZ
• Electronic gear ratio: 1～32767/1～32767
• Speed control range: speed ratio: 1:5000
• Speed rate of change: Speed fluctuation ratio: ＜±0.03(load 0 - 100%) .＜ ±0.05 (power -15% - +10%)
• Command smooth way: Linear time constant 1 ms-10000ms （0r/min←→1000r/min)
• frequency characteristic: 300HZ

SDF Series Driver Position control mode wiring diagram (5V different signal input)

Input/output signal:

• location signal output
• output type:ABZ phase line drive output/ Z open collector output
• frequency division ratio: 1/225～1Frequency division
• input signal---7 points photoelectrie isolation input:
• Input point can be defined as any 21kinds, see parameter setting

Output signal 4 collector open

• location/speed reach
• servo alarm output
• Z signal output
• brake output.

Advantage

1.Matching with 17-bit single-turn absolute value optical encoder, 5 pairs of poles,to ensure the positioning accuracy of one millionth.

2.Standard RS485 communication function, realize upload and download network control

3.All input/output ports can be freely defined and have strong applicability

4.Position control, speed control, torque control Modbus;communication can be converted to meet common applications

5.A variety of intelligent monitoring functions and operation panels are convenient for customers to debug and diagnose

6.The internal simple PLC function, in some simple control occasions, PLC can be completely omitted, and a lower cost solution can be realized.

Servo drive power supply and peripheral devices wiring

Power line terminals wiring

L1,L2,L3,PE,U,V,W terminal, transversal area≥1.5mm2 (AWG14-16).

L,N terminal,transversal area≥1.0 mm2 (AWG16-18).

Grounding:the grounding wire should be as thick as possible,drive and servo motor grounding at PE terminal,grounding resistance＜100Ω

1500W without brake

Product Description

Package 1× SDF20NK5X Servo Drive 1× 1.5KW 110F-0625TDL AC Servo Motor without brake 1x DB25 hole plug and shell 1 x 3m Power Cable with Plug 1 x 3m Encoder Cable with Plug Pdf. user manual	Parameters of the motor Model: 110F-0625TDL Power: 1.5KW Number of poles: 5 Rated power supply: 220V Rated speed: 2500rpm/min Max speed: 3500rpm/min Rated torque: 5.73N.m Instantaneous max torque: 17.19N.m Rated current: 6.8A	Torque speed characteristic diagram With brake: No Back emf: 50.9V/krpm Torque constant: 0.84N.m/A Line resistance: 0.84Ohms Line inductance: 6.6mH Electrical time constant: 7.9ms Rotor inertia: 5.2 (x10-4kg·m²) Insulation class: F Waterproof grade: IP65

1500W with brake

Product Description

Package 1× SDF20NK5X Servo Drive 1× 1.5KW 110F-0625TDL-Z AC Servo Motor with brake 1x DB25 hole plug and shell 1 x 3m Power Cable with Plug 1 x 3m Encoder Cable with Plug Pdf. user manual	Parameters of the motor Model: 110F-0625TDL-Z Power: 1.5KW Number of poles: 5 Rated power supply: 220V Rated speed: 2500rpm/min Max speed: 3500rpm/min Rated torque: 5.73N.m Instantaneous max torque: 17.19N.m Rated current: 6.8A	Torque speed characteristic diagram With brake: Yes Back emf: 50.9V/krpm Torque constant: 0.84N.m/A Line resistance: 0.84Ohms Line inductance: 6.6mH Electrical time constant: 7.9ms Insulation class: F Waterproof grade: IP65

1800W without brake

Package include:

• 1× SDF20NK5X Servo Driver
• 1× 1.8KW 110F-0630NCL(A) AC Servo Motor without brake
• 1x DB25 hole plug and shell
• 1 x 3m Power Cable with Plug
• 1 x 3m Encoder Cable with Plug
• Pdf. user manual

Model: 110F-0630NCL(A) Power: 1.8KW Number of poles: 5 Rated power supply: 220V Rated current: 8.2A Net weight:4.84kg(10.66 lb) Insulation class: F Waterproof grade: IP65	Electrical time constant: 4.69ms Torque constant: 0.66N.m/A Rotor inertia: 0.916x10-3 (kg.m²) Back emf: 43V (V/1000r/min) Line resistance: 0.55Ω Line inductance: 2.58mH	Torque & Speed Rated speed: 3000rpm/min Rated torque: 5.73N.m Max speed: 4000rpm/min Max torque: 16.2N.m

Advantages:

1.Matching with 17 bit single coil absolute magnetic encoder, 5 pairs of poles,to ensure the positioning accuracy of one millionth.

2.Standard RS485 communication function, realize upload and download network control.

3.All input/output ports can be freely defined and have strong applicability.

4.Position control, speed control, torque control Modbus;communication can be converted to meet common applications.

5.A variety of intelligent monitoring functions and operation panels are convenient for customers to debug and diagnose.

6.The internal simple PLC function, in some simple control occasions, PLC can be completely omitted, and a lower cost solution can be realized.

Model: SDF20NK5X Maximum current: 18A Input voltage: AC170-253V (50Hz or 60Hz) Cooling method: radiating air cooling Control mode: SVPWM control Operating temperature: 0℃~+55℃ Storage temperature: -20℃-80℃ Protection level: IP54	Control model: Position control/speed control/torque control/inching operation/RS485 communication Braking function: Built-in Display and operation: Six digit seven segment display LED,four function operation	Protective function: Undervoltage, overvoltage, overload, overcurrent, encoder abnormality, braking, position out of tolerance, etc. Command control mode: external pulse External command pulse input form: pulse+square, double pulse, A/B quadrature Speed control range Speed regulation ratio: 1:5000

SDF series driver position control mode wiring diagram (24V single-ended input signal)

Note:

The functions of input port 1-input port 6 can be defined; please refer to PN1110-PN116 parameters for details.

The function of output port 1-output port 3 can be defined;please refer to PN70-PN72 parameters for details.

Position control model

• Command control model: External pulse
• External command pulse input:
• Form: pulse+ direction cw/ccw A/B orthogonality
• Maximum frequency differential motion: 1MHZ open collector: 200KHZ
• Electronic gear ratio: 1～32767/1～32767
• Speed control range: speed ratio: 1:5000
• Speed rate of change: Speed fluctuation ratio: ＜±0.03(load 0 - 100%) .＜ ±0.05 (power -15% - +10%)
• Command smooth way: Linear time constant 1 ms-10000ms （0r/min←→1000r/min)
• frequency characteristic: 300HZ

Servo driver peripheral devices wiring

Input/output signal:

• location signal output
• output type:ABZ phase line drive output/ Z open collector output
• frequency division ratio: 1/225～1Frequency division
• input signal---7 points photoelectrie isolation input:
• Input point can be defined as any 21kinds, see parameter setting

Output signal 4 collector open

• location/speed reach
• servo alarm output
• Z signal output
• brake output.

Power line terminals wiring

• L1, L2, L3, PE, U, V, W terminal, transversal area≥1.5mm2(AWG14-16). L,N terminal,transversal area≥1.0 mm2(AWG16-18).
• Grounding: the grounding wire should be as thick as possible, drive and servo motor grounding at PE terminal, grounding resistance＜100Ω.

Application areas:

AGV trolley, medical equipment, automatic door, industrial robot, cutting machine, electronic processing and detection,Solid coordinate measuring instrument,CNC gear shaper,CNC hobbing machine,Industrial manipulator,Semiconductor equipment,Engraving equipment,Measuring equipment,Medical equipment,robot and other automated equipment on the market.

Shipping

    Please open the package and check if there are some damages before sign, if there are some damages , please do not sign and contact us immediately

    Items will be shipped within 1-2 days upon the receipt of payment.

Problem&Feedback

    Please give us the opportunity to resolve any problem when you have, we concern your problem and we will try our best to resolve it.

    We are a new member in ebay now, and need understand both of sides

    Pls email us before you want to leave any negative feedback

Refund

    When you have the parcel, and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos

    Any reason required for all refund. Item must be in it's original condition and no physical damage. Buyer responsible for all shipping cost

Contact us

    Welcome worldwide customer inquire and questions, we will try to do our best to feedback customer’s message within 1-2 business days,if not pls check the mail box again

    Customer’s satisfaction is very important to us.