Algae Clean Scrubber ACS-10-HOB-G4 ABS (Hang on Back)
Includes:
Base Unit
Power supply 18DCV US Plug
Dimmer switch (dimmer switch will not work with timer)
Twin 12 (Total 24 with 90 degree lens)LED Light System
Y Power adapter
ALGAE CLEAN SCRUBBER
BY WATER STREAM REFUGIUM
1: Finding the right spot to house the ACS to your sump
filter. With level adjustments and tank rim adjustments.
2: Lighting is all in place. You can move the light fixtures up
to view the algae screen on both sides.
3: Hooking up a pump to the ACS. You have a union fitting
on the spray bar screen and a 1/2” barb fitting for 1/2”
tubing. Remove the union when putting the tubing
on the barbed fitting then put the union back together.
Pump size or flow over screen is about 200gph. You can
use your return sump pump by tee and valve to control
the flow.
It depends on how available nutrients, nitrates and phosphates is in your tank on how fast algae will grow, if it’s taking to much out, you can adjust the lighting cycle and/or use the touch control for the lighting to increase or lower the brightness level.
Finger touch the power icon less than 3 seconds for on/off, touch the power icon for more than 3 seconds for dimming function to lower or rise brightness level.
Max tank size 225 gallon
Scrubber screen size 10" x 6"
Base Unit Size 10 5/8"L x 4"W x 8 1/8"H
With union inlet 14 1/8"L on top
LED Lighting 2x(3w x 12) 72w max with dimmer switch
LED chips 16 - 380nm to 840nm Full spectrum and 8 - 6500k White
Algae Clean Scrubber uses algae as a natural filter to move excess nutrients (Nitrate, Phosphate and other pollutants) to grow algae in a controlled unit to be easily removed to clean or harvest most of the algae and not in your display tank. This form of water filtration can reduce the need of frequent water changes and cleaning.
Are made of
1/4” and 1/8’ Black ABS Main Casing
1/8” Clear Acrylic LED Windows
Movable Screen Plastic, Black Acrylic, ABS Plastic
Fittings and Pipe, PVC
LED Lighting, Acrylic, ABS Plastics, DC powered
The advantages of a Water Stream Refugium Algae Clean Scrubber
1. LED Lighting slides into window pockets to enclose lighting into main algae chamber on both sides. Allowing no light on outside.
Note: Best to run ACS lights opposite of display tank lights with a timer to help stabilize pH swings.
Also if the algae is growing to fast and pulling to much nutrients out, you can use the dimmer control to dim the lights down for less algae growth.
2. The easy removable screen housing for cleaning and harvesting algae. If screen is damaged it’s easy to remove and install a new screen.
3. Water inlet 1/2” ID with removable union to tee off from your main return pump or a separate pump.
Note: Best to have a valve to shut off water supply to ACS for cleaning and harvesting algae or just unplug power to the pump.
FOR REFUNDS AND/OR RETURNS
30 Days from date of purchase.
Buyer pays shipping both ways ( to the buyer and from the buyer ).
Item or items must be fully intact as NEW with
all labels and original packaging.
After 30 Days refer to warranty.