New from MineMaster UK - ATX PSU Sync Starter Cables!

Run your rig with two ATX PC power supplies. Benefit from better load management and cheaper priced PSUs!

When building a mining or gaming rig getting a high-quality, efficient and properly spec'd PSU is very important. Unfortunately once your rig gets to a certain size you will need to supply power in excess of 1000 or 1200 Watts, sometimes even more. ATX PSUs of this rating have become very expensive, partly due to the demand from miners. With this sync cable you can run one rig from two ATX PSUs therefore allowing you to use 2x 650W PSUs instead of a single 1300W PSU, or combine two large PSUs to build a higher power rig.

Distributing your power between two PSUs in this way has the benefit of not concentrating your power draw through one set of components but perhaps more importantly it allows you to save money on your PSUs! 2x 650W PSUs are consistently cheaper to purchase than a single 1300W one. What's more you can use two 850W or 1000W PSUs together and build a much larger rig than would be possible with a single PSU. This brings further efficiencies by being able to fill all those PCI-E slots on those mining motherboards!

Build a larger rig and save money at the same time! Grab your dual PSU ATX sync cable today!

Why do I need this?
ATX PSUs only power-on when they receive a signal from the motherboard, this signal is sent along the 24pin ATX connector. If you want to run two ATX PSUs in your system you have a problem as they both can't be connected to the motherboard's single ATX 24pin connector - unless you have this cable! Once this cable is connected to both PSUs and your motherboard both PSUs will now power-on when the system starts. This allows you to build systems with a higher power load or combine two cheaper PSUs in place of a more expensive single PSU of the same rating.

How is this used?
  • Connect the single 20+4pin ATX Male connector to your motherboard's ATX connector.
  • Connect the 24pin ATX Female connector with 24 wires attached to one of your PSUs - this will be your Primary PSU.
  • Connect the other 24pin ATX Female connector with 2 wires attached to your other PSU - this will be your Secondary PSU.
  • Now ensure that your Primary PSU is used for all your other motherboard connections (CPU 4+4pin, any additional PCI-E power connectors on the board) and disks. Never split the CPU and other system components across PSUs! This Primary PSU can also power some GPUs and Risers (make sure not to overload it).
  • The Secondary PSU can be used for additional risers and GPUs.
  • When you power-on your rig both PSUs will now start at the same time!
  • Remember to power each GPU and its riser from the same PSU. Don't power the riser from one PSU and the GPU attached to the riser from another PSU. Also, if a GPU has multiple PCI-E power connections never split these between PSUs!
  • Remember the 80% rule - Never load a PSU above 80% of its rated capacity! - so 800W for a 1000W PSU, 960W for a 1200W PSU etc.
  • Note that the two PSUs don't have to be of the same rating, so it is ok to combine a 650W PSU and an 850W one with this cable. Just remember to keep under 80% load on each PSU.

Features:- 
20+4pin ATX Male connector to support all ATX motherboards
2x 24pin ATX Female connectors for connecting two PSUs
20AWG cable, light and flexible and providing more than enough power for the motherboard
30cm overall length - a 60cm span! This provides plenty of reach to keep your PSUs spread-out.
Perfect for mining, gaming or any high-powered PC System!

What you get:-
1x - 30cm 20AWG 20+4pin ATX Male to 2x 24pin ATX Female PSU Sync Starter Cable in black

Still need more power?!
Check out our server PSU breakout boards and cables. These allow you to use the economical and reliable server PSUs in your system.
12x PCI-E Server PSU Breakout and Cables... https://www.ebay.co.uk/itm/114847106365
17x PCI-E Server PSU Breakout... https://www.ebay.co.uk/itm/114847106699

The ATX Sync Cable is securely bubble packed and shipped for next day delivery for immediate installation. You can rely on us to deliver and ensure you can get your rigs up and earning!

Quality Guaranteed! Please contact us for any support requirements - WE care about YOUR rigs!

Be sure to check out our other products. We strive to be the best source for cryptocurrency mining equipment in the UK. Much more coming soon...