ODROID GO Advance Black Edition with Aura Black Cover
ODROID GO Advance Black Edition is an advanced edition of the pre-existing ODROID GO Advance. This specific version comes in the Aura Black cover. The following is a list of the emulators compatible with the ODROID GO Advance Black Edition. SNES Atari7800 GBC PSP Atari Lynx Sega CD Master System Atari5200 NES PC Engine GBA PC Engine CD Atari2600 GB PSX Game Gear Mega Drive Disclaimer Some particular ROMs DO NOT Function at their Full Capacity on the ODROID-GO Advance Black Edition Make sure you have an extra MicroSD Card that has the storage capacity of 8GB and more (this will not be provided with the package) Refrain from using the Force Power Off option until there is an emergency and it is required The ODROID-GO Advance can be turned OFF if you press the ON/OFF button for 6 seconds at least (this option shall be availed in dire circumstances when no other choice to turn OFF the device is available) Specifications of ODROID-GO Advance Black Edition Central Processing Unit: Quad-Core 1.3 GHz Rockchip RK3326 ARM Cortex-A53 Graphics Processing Unit: Dvalin Mali G-31 GPU Storage: MicroSD Card Slot compatible with UHS-1 | 16 MegaBytes Boot SPI Flash Display: TFT LCD 3.5-inch (MIPI, ILI9488 interface) 320x480p Memory: DDR3L 1GB 786 MHz (Width of Bus is 32 Bits) Battery: Li-Polymer Battery 3.7V/3000mAh (you can exercise gaming for approximately 9 consecutive hours) Audio: 0.5Watt Earphone Jack 8Ω Mono Input Buttons: From F1 to F6, Left Shoulder 1 and 2, Direction Pad, Analog Joystick, X, Y, A, B, Right Shoulder 1 and 2 DC Jack: Power Connector USB-C (package will include a cable for charging) | 5V input is compatible Wireless: 4GHz Built-in ESP-WROOM-S2 802.11b/g/n External I/O: 10-Pin Port (GPIO, I2C, and IRQ @ 3.3Volt) | 1x USB 2.0 HOST Power Off Mode: Less than 1mA Power Consumption by Game Emulation: 300mA ~ 550mA. The consumption will primarily depend on the brightness amount you set for the backlight, the emulation type of the game, and your particular wireless usage. If you want to save power, then make sure you turn Off WiFi when not needed. Charging Time: Varies from 2.5 to 3 hours (only when the module is turned OFF). Ranges from 4 hours to 5 hours when you are using the module while it is being charged. Weight: 18 kg | 180 grams | 6 oz Dimensions: 1 x 2.8 x 0.8 inch | 15.5cm x 7.2cm x 2cm | 155mm x 72mm x 20mm Items Included Bottom Enclosure LCD Window Battery Sticker Board – ODROID GO Advance Black Edition L, R, L2, R2, Power, X, Y, Plastic Buttons Analog Joystick 4x Screws (1.7x8) Top Enclosure Driver TFT LCD 3.5-inch 320x480p Battery 3000mAh Rubber D-Pad 6x Rubber Buttons (F1 to F6) Type-C USB Power Cable A, B, D-Pad Plastic Buttons 7x Screws (1.7x5) Speaker 0.5Watt Rubber Buttons X, Y, A, B
ODROID GO Advance Black Edition with Aura Black Cover
ODROID GO Advance Black Edition is an advanced edition of the pre-existing ODROID GO Advance. This specific version comes in the Aura Black cover. The following is a list of the emulators compatible with the ODROID GO Advance Black Edition.
SNES
Atari7800
GBC
PSP
Atari Lynx
Sega CD
Master System
Atari5200
NES
PC Engine
GBA
PC Engine CD
Atari2600
GB
PSX
Game Gear
Mega Drive
Disclaimer
Some particular ROMs DO NOT Function at their Full Capacity on the ODROID-GO Advance Black Edition
Make sure you have an extra MicroSD Card that has the storage capacity of 8GB and more (this will not be provided with the package)
Refrain from using the Force Power Off option until there is an emergency and it is required
The ODROID-GO Advance can be turned OFF if you press the ON/OFF button for 6 seconds at least (this option shall be availed in dire circumstances when no other choice to turn OFF the device is available)
Specifications of ODROID-GO Advance Black Edition
Central Processing Unit: Quad-Core 1.3 GHz Rockchip RK3326 ARM Cortex-A53
Memory: DDR3L 1GB 786 MHz (Width of Bus is 32 Bits)
Battery: Li-Polymer Battery 3.7V/3000mAh (you can exercise gaming for approximately 9 consecutive hours)
Audio: 0.5Watt Earphone Jack 8Ω Mono
Input Buttons: From F1 to F6, Left Shoulder 1 and 2, Direction Pad, Analog Joystick, X, Y, A, B, Right Shoulder 1 and 2
DC Jack: Power Connector USB-C (package will include a cable for charging) | 5V input is compatible
Wireless: 4GHz Built-in ESP-WROOM-S2 802.11b/g/n
External I/O: 10-Pin Port (GPIO, I2C, and IRQ @ 3.3Volt) | 1x USB 2.0 HOST
Power Off Mode: Less than 1mA
Power Consumption by Game Emulation: 300mA ~ 550mA. The consumption will primarily depend on the brightness amount you set for the backlight, the emulation type of the game, and your particular wireless usage. If you want to save power, then make sure you turn Off WiFi when not needed.
Charging Time: Varies from 2.5 to 3 hours (only when the module is turned OFF). Ranges from 4 hours to 5 hours when you are using the module while it is being charged.
Weight: 18 kg | 180 grams | 6 oz
Dimensions: 1 x 2.8 x 0.8 inch | 15.5cm x 7.2cm x 2cm | 155mm x 72mm x 20mm