DSLRKIT PSE4P1UGK Gigabit PoE+ Switch
5 Ports (1Uplink, 4 PoE) Power Over Ethernet Switch
IEEE 802.3af/802.3at Endspan PSE(1,2+/3,6-)
Auto Detection Powered Device
AC Input: 100V ~ 240V
52VDC up to Max. 30W/port, 4ports Total budget 96Watt
10/100/1000Mbps ,Wall Mount
It is easy to connect. With data and power over Ethernet from one unit, the PoE Switch reduces cabling requirements and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire carries both data and power lowering the installation costs, simplifying the installation effort and eliminating the need for electricians or extension cords. Providing 4 PoE interfaces, the Switch is ideal for small businesses and workgroups requiring to deploy the PoE for the wireless access points, IP-based surveillance camera or IP phones in any places easily, efficiently and cost-effectively.
Compatible all 802.3af/802.3at device as Wireless Access Point, IP Phone, IP camera, Gateway , Switch, or More.....
Automatic detection of PoE power devices, non-PoE devices can be securely connected to the switch any network port
Features:
Specification:
ALL LAN/WAN Port: |
Standard 10/100Mbps Ethernet port. Support 10Mbps Ethernet and 100Mbps Fast Ethernet, can operate in full-duplex or half-duplex mode,must work with 4 pairs UTP Cat5/5e/6 cable。 |
LAN Port 1-4: |
any supported IEEE802.3af PoE Powered Device and Automatic Detection and Protection None PoE Powered Devices (PDs) |
Virtual LAN: | ON/OFF |
LED |
Power (Red) |
PoE In-Use (Orange LAN Port) |
|
10/100 LNK / ACT(Green) |
|
Product Dimensions |
132mm W x 66mm D x 32mm H |
Weight |
660g(switch and Power adapter) |
Power Requirement |
100~240V AC, 50-60 Hz |
Power Consumption |
96 Watts maximum |
PoE Standard |
IEEE 802.3af, IEEE802.3at |
PoE Power Output |
52VDC, Max. 30Watt/port, 4ports Total budget 85Watt |
PoE Power Supply Type |
pin 1 & pin 2 (Power +) ; pin 3 & pin 6 (Power -), Mode-A, Endspan |
PoE Power Budget |
PoE: Max. 85W |
Regulation Compliance |
FCC Part 15 Class A, CE |
Operating |
Temperature: 0~50 Degree C, Relative Humidity: 20~95% |
Storage |
Temperature: -10~70 Degree C, Relative Humidity: 20~95%(non-condesing) |
Standards Compliance |
IEEE 802.3: 10Base-T |
IEEE 802.3u: 100Base-Tx |
|
IEEE 802.3z: 1000Base-Tx | |
IEEE 802.3x: Flow Control |
Item Included:
DSLRKIT PSE4P1UGK PoE switch x1(with Retail Box)
AC Power Adapter(DC OutPut: 52V/1.85A) x1
AC Power Cable x1
12 Months Warranty from the data of purchase.