Store Categories
Store Newsletter
Why Buy From us
Nema23 314Oz-in Schrittmotor Stepper Motor 2.3NM DSP Closed Loop Driver 4A 1.8°
Items Description
无标题 2

 

Nema23 314Oz-in Schrittmotor Stepper Motor 2.3NM DSP Closed Loop Driver 4A 1.8° 
 
 
1. Shipping list

1PC

Close loop stepper motor(with 118 inch Power Cable)

1PC

Close loop stepper drive

1PC

Encoder cable(118 inch)

2. Drive Specifications& Feature

Type

DSP Closed loop vector control stepper drive

maximum peak current

5A

Impulse response frequency

200Khz

Micro-stepping driver

200~51200ppr

Voltage

DC24-60V

Protective function

Over voltage, over current, tracking error, overproof

Signal input

Support PUL/DIR and CW/CCW modes (difference)

Compatible 5~24V signal (Don't need a resistor)

Continuous overload

Output an alarm signal

Type of cooling

Air-cooling

Environment

Keep away from dust, oil, corrosive gas, high humidity and high vibration

Application temperature

0~50 degree centigrade

Humidity

40-90%RH

Shake

10~55Hz/0.15mm

 

Min

Typical

Max

Unit

Output Current

-

-

5

A

Input Voltage

24

36

60

VDC

Logic Signal Current

7

10

16

mA

Pulse input frequency

-

200

-

kHz

Isolation Voltage

500

-

-

Mohm

3.  Motor Specifications& Feature

Step angle

1.8degree +/-5%

Phase

2 phase

Rated voltage

3.4V

Rated current

4A

Resistance

0.85 ohm  +/-10%(At 20 degree centigrade)

inductance

2.0mH  +/-20%/Phase

Hold torque

2.3N.m

Insulation

B

Rotor inertia

470g.cm2

weight

1.1kg

4. Advantage

 

1. HBS57 uses advanced motor control DSP chip and vector loop control technology.

2. High control precision and reliable, low noise and little vibration, no step to lose .

3. When the motor is continuously overloaded, the driver will output an alarm signal in time, which has the same reliability as the AC servo system.

 

5. Application area

It is suitable for all kinds of small and medium-sized automation equipment and instruments, such as: engraving machine, wire stripping machine, cutting machine, laser machine, plotter, CNC machine tool, automatic assembly equipment, electronic processing equipment, textile and garment equipment. It is especially effective in applications where users expect low noise and high speed.

QA:

1.Power LED does not light after power
1.Check the connection of the power line.
2.the voltage maybe too low

2.Red light warning
1.check the connection of the motor with power,
2.input voltage of the driver maybe too high or too low

3.The motor do not turn when the pulse input
1.Whether the pulse input of the driver is connected stably
2.Whether the input way in the system configuration of the driver is pulse input
3.Whether the motor can be released

4.Red light alarm after running a small angle
1.Whether the phase wire of the motor is correctly connected. If it is not correct, please refer to the motor phase and the corresponding phase sequence of the driver.
2.In the driver configuration parameters, whether the number of motor encoder lines is consistent with the connected motor parameters. If they are different, you need to reset them.
3.Whether the pulse input speed is greater than the rated speed of the motor

1.Orders will be shipped out within 5 working days once payment received. Please make sure the phone number is valid.

2.We Will ship by DHL, FedEx, UPS, EMS( we will choose the best way to ship the items ASAP).

3.Kindly please note the tax fee and clearance fee are not included in the item price.

4.There will be remote fee if your address is remote area.
Only Paypal is accepted.
If you need other payment terms, please leave message to us.

Normally we provide 12 months warranty, some regular items even up to 24 months.Please see the details above.

Products are tested before shipping ,and we guarantee our products are in good working condition.

If the product you received is defective caused by shipping, please contact us before you return to us. We will RESEND the good product to you ASAP or will full refund you the payment. 

Fast To Buy is a worldwide industrial products online store of over million configurable and standard components. We are a leading provider for industrial automation control, CNC machine and electrical equipment. Each product, in which FastToBuy sales online, is subject to a 100% quality control. 

we have enough stock, if you want to buy more, please feel free to contact us,we will add the quantity.

 

We will reply you ASAP. If no response within 24 Hours, please check the spam in your mail box.

We strive to maintain the highest standards of excellence for shopping experience and 100% customer satisfaction!
Positive feedback is very important to us. We sincerely request that you contact us immediately before you give us neutral or negative feedback, so that we can satisfactorily solve your concerns.
For anything questions about product, price, shipping or order status, please send ebay message to us.

 
Copyright fasttobuy 2017 rights reserved.
PushAuction

Am 17.02.22 hat der Verkäufer die folgenden Angaben hinzugefügt:

DataCaciques