1. Shipping list
1PC |
Rotation Axis |
1PC |
Tailstock |
1PC |
spanner |
1PC |
TB6600 Stepper Drive |
2. Feature
Type |
chuck |
Jaws |
center height |
Overall Height |
transmission ratio |
Motor |
For CNC Router |
4th Axis for CNC router |
K01-50 |
3 jaw |
44mm |
75mm |
4:1 |
Nema17 |
CNC1520 |
K02-50 |
4 jaw |
44mm |
75mm |
4:1 |
Nema17 |
CNC1520 |
|
K01-63 |
3 jaw |
54mm |
85mm |
4:1 |
Nema17 |
CNC1520 |
|
K02-63 |
4 jaw |
54mm |
85mm |
4:1 |
Nema17 |
CNC1520 |
|
K11-80 |
3 jaw |
65mm |
100mm |
6:1 |
Nema23 |
CNC3040 |
|
K12-80 |
4 jaw |
65mm |
100mm |
6:1 |
Nema23 |
CNC3040 |
|
K11-100 |
3 jaw |
65mm |
115mm |
6:1 |
Nema23 |
CNC3040 |
|
K12-100 |
4 jaw |
65mm |
115mm |
6:1 |
Nema23 |
CNC3040 |
3 . Stepper Drive Specifications& Feature
Signal input: single ended, pulse / direction
Subdivision optional: 1/2/4/8/16/32 subdivision
Output current: 0.5A-4.0A
Input voltage: 9-42VDC
The current is automatically halved at rest.
Can drive 4, 6 and 8 Lead two-phase, four-phase stepper motor
Optocoupler isolated signal input, strong anti-interference ability
With overheating, overcurrent, undervoltage lockout, input voltage anti-reverse protection and other functions
Small size, easy to install
External signal 3.3-24V universal, no series resistor required
Operating Temperature: -10 to 45 Degrees Celsius
Storage temperature: -40 to 70 Degrees Celsius
Chopping Frequency: less than 50KHZ
4. 4th axis pulse equivalent SETUP:
Mach3 system settings
number of pulses of 1 Degree |
(number of pulses of Motor/lap* micro-stepping levels of Drive * reduction ratio)/360 degree |
such as: Two phase Nema23 Motor micro-stepping levels:16 reduction ratio:6 |
(200×16×6)÷360=35.5555
|
control card system settings
The angle of one-pulse
|
360 degree/( number of pulses of Motor/lap* micro-stepping levels of Drive * reduction ratio)
|
such as: Two phase Nema23 Motor micro-stepping levels:16 reduction ratio:6 |
360÷(200×16×6)=0.01875
|
The replace algorithm of X or Y Axis:
perimeter/( number of pulses of Motor/lap* micro-stepping levels of Drive * reduction ratio)