Fastwarm 200W Electric Underfloor Heating Cable
FastWarm heating cable kits are industry leading heating systems that can be used as a secondary heat source (when used in conjunction with FastWarm XPS or Tile backer boards, the warm up time will and running costs can be reduced as much as 25%) providing an effective solution to radiant heating under almost any floor covering and in any room type.
FastWarm heating cables comprise of the thinnest (2mm) fluoropolymer (Teflon) coated, dual-core resistive heating cable on the market. The cables can be spaced at an appropriate distance to provide an even heat distribution across the floor to suit the required heat output. The cable system allows for use in small confined areas (bathrooms and en suites) plus complicated shaped areas, making fitting a FastWarm underfloor heating cable suitable for any DIY enthusiast. Please note; all electrical connections should be undertaken by a qualified electrician.
FastWarm heating cable kits come with everything required to install the FastWarm underfloor heating system, meaning there is no need for any additional components. Everything you need in a box.
FastWarm heating cable kits come with a peace of mind lifetime guarantee (50 years) as we only use the highest quality components sourced across the globe. FastWarm heating cables do not utilise PVC as an outer coating which are an inferior casing, meaning you can rest assured that once installed, your FastWarm underfloor heating system will last a lifetime.
Fastwarm loose cable kits include the following: -
FastWarm Loose Cable
2mm cable, easy to install in confined and awkward shaped areas.
1 drum up to 9m2
2 drums over 9m2
1 x Fastwarm Programmable Thermostat
Choice of Digital, Touchscreen and WiFi controllers in white or black. All supplied with a 3m floor sensor probe
Fastwarm Fastprime Primer
A water based acrylic primer, which is used to prime the substrate/insulation board to aid bonding and reduce moisture
1 x Roller and Foam head
To apply the Fastprime Primer
Duct Tape
Heat resistant duct tape to aid installation and fix any loose laid heating cable
1 x 2m Conduit length
To house the floor sensor prob
Thermostat options
Below are the specifications for each thermostat available with this kit.
Fastwarm Digital
The Fastwarm Digital Programable is a ultra-modern 7 day programmer which can be used for air, floor or air & floor.
The contemporary design offers white luminous backlight for low light areas and touch sensitive keys for that sleek feel.
- Lifetime warranty (50 years)
- Comes equipped with 3m floor sensor probe
- Faraneheit/Celcuis modes
- Adaptive start learning function
- Switched up to 3600w (16amp @ 230v AC)
- 7 day programme
Fastwarm Touch
The Fastwarm Touch screen thermostat has an ultra-sleek, minimal design and chrome surround.
Fastwarm Touch Screen can switch up to 3600w / 16amps and comes supplied with a 3m floor sensor probe to regulate floor temp.
- Supplied with a 3m floor sensor probe
- Window open detection
- Holiday setting enabled
- Can switch up to 3600w (16amps)
- Frost protection enabled
- 5/2 or 7 day program
Fastwarm Wifi
This Thermostat pairs to your home WIFI using an application which is available from both Android and IOS platforms.
- WIFI Control
- Programmable
- Professional design
- Hold function
- Floor Temperature Limitation
- Power Consumption Monitor (APP)
- Large Screen
| IP rating | IP21 |
|---|---|
| Max Load | 16A |
| Supply voltage | 230v |