Description

Introduction
ECG100G is a kind of single channel electrocardiograph, which features in printing ECG waveform by thermal printing system, prompting for "Lead off" or "Lack of paper", multi-language interface, recording ECG waveform in AUTO/Manual mode, convenient to operate.

Function 
1)Adopt digital signal processing technology and get high-quality ECG waveform via power frequency filter, baseline filter and EMG filter of ECG signal.
2)Adopt high-resolution thermal printing system(8 dot/mm), no need for any adjustments. Recording frequency: up to 150Hz. 
3)Real-time and continuously record the clear and accurate ECG waveform and annotation character(including lead mark, sensitivity, paper speed and filter state, etc.).
4)In AUTO mode, finish recording by pressing the button once, which improves work efficiency.
5)Multi-language (Chinese, English, French, Italian, German, Spanish and Turkish) interface and report.
6)In optimal DC state, up to 7-hour standby time, continuous print up to 4-hour, record up to 150 ECG waveform.

Performance
  • Input mode: floating and defibrillation protection
  • Frequency response: 0.05Hz ~ 150Hz(-3dB~+0.4dB)
  • CMRR: >60dB, >100dB(add filter)
  • Time constant:≥ 3.2s
  • Patient leak current: <10µA
  • Calibration voltage: 1mV
  • Sensitivity: 5, 10, 20 mm/mV ±5%, standard sensitivity: 10mm/mV±2%
  • Noise level: ≤15µVp-p
  • Input circuit current: ≤50nA
  • Input impedance: ≥50MΩ
  • Sampling accuracy: 12-bit
  • Safety classification: class I, type CF and defibrillation-proof applied part
  • Recording mode: thermal printing system
  • Paper size: 50mm(W)×20m(L)
  • Sampling frequency: 800Hz
  • EMG interference filter: 35Hz (-3dB)
  • Power frequency filter: AC 50Hz/60Hz(-20dB)
  • Paper speed: 25, 50mm/s, ±5%
  • Power supply:
  • AC: 100V~240V(50/60Hz)
  • DC: 7.4V/2000mAh rechargeable lithium battery
  • Fuse specification: two AC time lag fuse(φ5×20mm), T1.6AL250V
  • Waterproof degree: IPX0
  • Working mode: continuous working

Accessories
  1. A lead cable
  2. 10 PCS Transform electrode
  3. A thermal recording paper
  4. A power cord
  5. An earth wire
  6. A user manual 

Physical characteristic
  • Working environment
  • Temperature: 5℃~40℃
  • Relative humidity: 25%~95%(non-condensing)
  • Atmospheric pressure: 700hPa~1060hPa
  • Transport and storage environment
  • Temperature: -40℃~+55℃
  • Relative humidity: ≤95%
  • Atmospheric pressure: 500hPa~1060hPa
  • Dimension: 315mm(L) × 215mm(W) × 77mm(H)
  • Weigh: 1.5Kg

Payment

We accept Paypal Payment.

Shipping

Clearance: we will ship your item to your confirmed address.
Buyers' responsibility to pay duties,taxes and other extra charges by the government in your country.

Terms of Sale

Buy safe Products
The following FDA Disclaimer is required for all eBay listing in Healthcare category and is included for REFERENCE: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.If the item is subject to FDA regulation, We will verify your status as an authorized purchaser of this item before shipping of the item. If you have questions about legal obligations regarding sales of medical devices, you should consult with the FDA's Center for Devices and Radiological Health.
The Fingertip Pulse Oximeter is registered on the Australian Register of Therapeutic Goods (ARTG) with the code 197923, and certified by FDA of United States and CE,TUV of Europe.The Fingertip Pulse Oximeter that is FDA 510K Approved.

About Us

Contec Medical Systems Co.,Ltd; 20 Years manufacturer,we have stock in USA and China.

Contact Us

Please contact us through eBay Message, we are on line to reply your message within 24 hours.
Wechat/Whatsapp/Mobile:+86 18716007715
Skype:contec.tessy
Email:contecmxfATgmail.com