Up for sale here is this complete rebuild kit for a Marantz 2250. This includes all the parts you need to rebuild a Marantz 2250 P800 power supply board, both P700 amp boards, PE01 tone board, P400 phono EQ board, P200 FM IF board, P300 FM MPX board, and P150 AM tuner board, as well as replacements for the 2 main capacitors. This does not include output transistors, lights, or fuses. I have new OnSemi MJ21195G/MJ21196G outputs listed here if you need them. Please don't buy any of the fake Chinese transistors on eBay--those are counterfeit and will blow up.

This kit includes the following:

Power Supply:
8 capacitors (Nichicon PW, Panasonic FC)
7 transistors (Fairchild/Onsemi)
5 diodes (2 dual diodes)
1 Relay (Omron)

P700 Amp:
10 capacitors (Wima film, Nichicon PW, Nichicon KL)
4 transistors (Fairchild/Onsemi)
4 diodes
heat-shrink tubing

PE01 tone board:
15 capacitors (Nichicon PW, Nichicon Muse, Wima film, Panasonic film)
4 transistors (Fairchild/Onsemi)


P400 Phono EQ board:
7 capacitors (Nichicon PW, Nichicon KL, Wima film, Panasonic film)
6 transistors (Fairchild/Onsemi)
4 diodes

Tuner boards:
35 capacitors (Nichicon PW, Panasonic FC, Wima film)

2 new main capacitors (Epcos 12000 uf 50v, same diameter as the old ones)
2 Panasonic film bypass capacitors (for the main caps)

Instructions

These are all high-quality brand new genuine parts. These are the same parts I use when I rebuild Marantz equipment. The transistors are the correct subs for the originals, and the capacitors are the same capacitance (uf) and the same or higher voltage. The main capacitors go up in capacitance slightly for improved sound.

I will include surprisingly well-written instructions, but rebuilding a receiver is moderately complicated, and you should know what you're doing and have a decent soldering iron, a little heat-sink compound, and a dim-bulb tester with 60W or 100W incandescent bulb. Please see my pictures for details.

US shipping and handling is $6, and international is $28. If you have any questions, please ask.