Furman M-8S 15A Standard Power Conditioner with Sequencer Rackmountable

Ships Free!

Merit M-8S Power Sequencer is the perfect low-cost AC power solution for any rack mount system where power sequencing is desired.

Install an M-8s in to the top slot of your rack, and the six delayed outlets in the rear panel will power up sequentially and protect all your equipment up to a 15-amp load.

Includes 3 delayed outlet banks – each with 2 outlets – plus 2 unswitched outlets.

Features
  • Power Sequencing
  • Prevents excessive inrush currents.
  • Six sequenced rear panel outlets (in three groups), two unswitched rear panel outlets, and one front panel unswitched outlet.
  • Momentary and maintained sequencing via rear panel terminal block or front panel switch (momentary only).
  • Noise Filtration
  • Noise filtering to reduce radio frequency and electromagnetic interference.
  • Surge Protection
  • Ensures equipment stays safe.
  • 9 Total Outlets
  • Eight rear panel outlets and one front panel convenience panel outlet.
  • 15 Amp Rating
  • 15 amp rating, with circuit breaker.
  • “Protection OK” Indicator
  • Front panel indicator LEDs for Outlet Banks, Protection OK and Power Status.
  • Wall Wart Spacing
  • Rear outlets have been spaced to accommodate even the bulkiest of wall warts and adapters.
  • All settings and configurations available on rear panel.
Specifications

Maximum AC Current Rating 15 Amps, 120 VAC (Thermal breaker)
AC Cord 14AWGx3, 10 feet, black, fixed, NEMA 5-15P plug
Convenience Outlet (Front Panel) 1 Un-switched NEMA 15-5R
Rear Panel Outlets 2 Un-switched NEMA 5-15R (1 duplex)
6 Sequenced NEMA 5-15R (3 duplexes, each controlled by separate relay)
AC Surge Protection Merit Class (sacrificial)
Spike Protection Mode Line to neutral, zero ground leakage
Max Continuous Operating Voltage 130V RMS
Max Clamp Voltage 500 Volts Peak
Peak Impulse Current 12,000 Amps
Energy Rating (2 X 820µS) 225 Joules
AC Filtering Pi LCR Filter
Noise Attenuation >26dB, 100 Khz to 1 MHz
Operating Temperature Range 5C (40F) to 40C (105F) degrees
Humidity Range <90% rH (Relative Humidity)
Rocker Switch Front panel, Sequence (ON, OFF)
Thermal Circuit Breaker Front panel, push to reset
Front panel indicators Delay 1, Delay 2, Delay 3, Power, Protection OK
Control/Status/Triggering (Rear Panel) Rear Panel DIP Switches: 12V Mode On/Off,
GND Mode On, Momentary/Maintained
Potentiometer Rear panel, time calibration fine tune delay adjust
Remote Terminal +5-30VDC In, 12VDC (12mA) Out
Remote Terminal Phoenix type 4-Pin Connector with Screw terminals; +12V, STAT, REM, GND (Class 2 Wiring)
Size 1.75” X 19.00” X 6.5” (HWD) – ANSI 1RU
Mass 5.3 lbs.
Power Consumption (No Load) 5 Watts
Safety Agency C/CSA/US
Family: Merit Series
Line Voltage: 120 (Volts)
----------------------------------------------------------------------------------------------------------------

Echotone Music LLC is an experienced  long time E-commerce Audio & Musical instrument dealer since 1998.  We take pride in selling quality gear for musicians, sound engineers, production companies and broadcast applications.   

Shipping --Items are well packed and shipped  USPS, UPS or Pallet Freight Service.  Items purchased on Friday may not ship until Monday or until the projected processing period.  We are working hard to get your unit Built ( if needed), processed and shipped.

Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs.

Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches,  scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees & accessories or your return may be subject to a return handling charge.

Refunds or for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. 

The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items,  electronic software downloads, demo gear, strings, reeds, computers, tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes & polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos.

Happy customers, that's music to our ears!