Professional Grade Diffuser: The supplied LED light features 42 built-in ultra-bright LEDs and those LEDs are covered with a screen to produce a soft and even light, thus avoiding hot-spots on your image that are so easy to obtain (and so difficult to avoid) with old-school, cheap, non-optical quality diffusers.

Consistent Positioning: The 'film holder' makes it so easy to obtain consistent relative positioning to lessen the pain in the post-processing of your images.

Perfectly Flat Negatives: The included film holder keeps negatives flat, giving your camera the best possibility of getting a high-resolution digitization image.

Super-quick Setup: The design facilitates the super-fast setup of the film holder, so you’ll spend more time digitizing than aligning!

Wide Compatibility: If you don't have a macro lens, you can also use 'LED Light' and 'Strip Film Holder' to digitize film.

* The set is particularly well-suited for the Nikon D850 camera due to its dedicated Negative Digitizer mode and ability to automatically reverse colors in-camera to expedite the digitizing process.

* Note:

1. It is recommended to select the image stabilizer switch of the lens to "OFF" when using the FDA-S1.

2. The slide mounts are not included.

3. Do NOT place the film in front of the turned-on LED light for a long time to avoid damage.

Compatible Lenses

Canon EF 100mm f/2.8 Macro USM Lens [requires supplied Adapter 4# and Adapter 2# (2pcs)]

Canon RF 100mm f/2.8L Macro IS USM Lens (requires supplied Adapter 4# and Adapter 2#)

Canon EF-S 60mm f/2.8 USM Lens [requires supplied Adapter 2# (2pcs)]

Nikon AF Micro-NIKKOR 60mm f/2.8D Lens (requires supplied Adapter 3# and Adapter 2#)

Nikon NIKKOR Z MC 50mm f/2.8 Macro Lens (requires supplied Adapter 3#)

Nikon AF-S DX Micro NIKKOR 40mm f/2.8G Lens

Sony FE 50mm f/2.8 Macro Lens (requires supplied Adapter 5#)

Sony FE 90mm f/2.8 Macro G OSS Lens [requires supplied Adapter 3# and Adapter 2# (2pcs)]

*If you don't have a macro lens, we recommend you buy JJC FDA-LED1 set

LED Light Specifications(not include)

Net Weight: approx. 73g

Dimension: 71 x 91.2 x 52.8mm / 2.8 x 3.6 x 2.1"

Material: ABS

LED Quantity: 42

Color Rendering Index(CRI): 95+

Color Temperature: 6500K

Illuminance: 10cm / 3.9" , 6392lux; 20cm / 7.9", 1473lux; 30cm / 11.8", 988lux

Brightness: 10 levels

Power Draw: 7.5W

Interface: Micro USB

Cable Length: approx. 1.5m / 4.9'

Q&A

Q1: Do I need a dark room to process these shots?

A1: No. However, any stray light will mess up the capture. If you are in, for example, an office environment, close your curtains, switch off room lighting and you’re set to go.

Q2: Isn't Camera alignment crucial? How do I do this?

A2: Yes, it is crucial. Fortunately, the JJC FDA-S1 can make the film frame to be as parallel to the camera’s sensor. All you need to do is adjust the front and rear distance of the film so that it fills the camera screen as much as possible. It's easy to get the hang of it after a few tries.

Q3: How do I convert my negative images into positive images?

A3: There are plenty of different methods for inverting negatives in Lightroom or Photoshop (or in many other image editing packages).

Our recommendation is to use a Lightroom plugin called "Negative Lab Pro".