30-Day Money Back Guarantee
Free Australia-Wide Shipping Orders $200+
DIGITAL INDUCTIVE
IGNITION KITS & MORE AT
Buy With Confidence ICE Ignition Experts
ICE Ignition PRO 100 9mm Leads - VL 3.0LTR/RB30DET w FEMALE Distributor & Coil

ICE Ignition Pro 100 Leads - Holden VL / RB30, FEMALE Dist & FEMALE Coil, Around The Valve Cover

The ICE Ignition 9HOL603 Pro 100 Ignition Leads will suit the Holden VL 3.0LTR / RB30 engine with:

  • Female Post Distributor FEMALE Post Distributor    FEMALE Post Coil
  •  Straight Sprk Plug Boot Straight Spark Plug Boot              fitment around the rocker cover Nissan RB30 fitment around cover

This lead set is made to suit the Holden VL / RB30 engines with FACTORY Distributor & Coil. A FEMALE Post Distributor and a FEMALE Post Coil was the factory configuration.

 

Please Note: This listing is only available with BLACK Ignition Leads and NO modifications are allowed including Lead Colour choice. This is due to the short processing time set on this listing and the additional cost required to manufacture custom ignition leads. Fortunately, we have the ICE Ignition 9HOL603-Custom Pro 100 Ignition Leads / Plug Wires on eBay  This listing allows for the following changes to the ICE Ignition 9HOL603-Custom Ignition Leads

  • Lead Colour Choice - BLACK, BLUE, or RED ignition leads
  • Distributor Boots & Terminals - MALE or FEMALE Boots & Terminals
  • Spark Plugs Boots & Terminals - 30 Deg, 45 Deg, 90 Deg, or STRAIGHT Spark Plugs Boots
  • Coil Boots and Terminals - MALE or FEMALE Boots & Terminals
  • Coil Lead Length - Alter the Coil Lead length to suit your Holden VL / RB30 engine

 

Why choose ICE Ignition Pro 100 9 mm Leads / Plug Wires?

  • More spark means a bigger explosion in the combustion chamber, this improves performance.
  • ICE Ignition leads / Plug Wires ensure this by minimizing resistance in the leads.
  • They are super-conductive with an ultra-low resistance of 100 ohms per metre. 
  • ICE Ignition Leads / Plug Wires are made from the high-quality ultra-low resistance spiral wound copper alloy core.
  • The alloy core is wrapped in ICE Ignition's proprietary insulation to provide maximum RF noise & heat shielding.
  • They are fitted with stainless steel "Snap Lock" fittings at the distributor and spark plug ends.
  • The boots are made from extreme-temperature silicone insulation and can withstand high temperatures.
  • The ICE Ignition 9HOL613 Ignition Leads / Plug Wires are a finished set of leads. Just plug them in and go!

 

WHAT'S IN THE BOX?
  • 6 x ICE Ignition 9HOL603 Ignition Leads
  • 1 x ICE Ignition 9HOL603 Coil Lead
  • Instruction Sheet
  • "ICE Ignition Plug Wires" Sticker

Features
Specifications
Warranty
About Us
Payment
Shipping
Returns

<div style="color:rgb(83, 83, 83);font-size:16px;font-style:normal;text-align:left;text-decoration:none;font-family:Open Sans">

Product Features & Benefits

The ICE Ignition Pro 100 Lead set features:

  • Spiral wound copper alloy core
  • Ultra-low resistance of 100 ohms per metre 
  • Delivers maximum spark and duration for improved performance.
  • Built-in Radio Frequency Interference (RFI) minimization.
  • All boots made from extreme temperature silicone to withstand high temperatures.
  • Premium "Snap Lock" stainless steel Spark Plug, Distributor Cap & Coil fittings. 
  • Numbered Lead Markers with easy to install tool to ensure correct lead fitment 
  • Ready to Install Lead Set. No cutting or terminating of leads required.
</div>

<div style="color:rgb(83, 83, 83);font-size:16px;font-style:normal;text-align:left;text-decoration:none;font-family:Open Sans">

ICE Ignition 9HOL603 Pro 100 Ignition Leads Holden VL 3.0LTR / RB30

Engine Type: Holden/RB30 3.0LTR 
Lead Diameter: 9 mm
Lead Resistance: 100 Ohms per metre
RFI Suppressive Leads: Yes
Lead Conductor:  Spiral wound copper alloy
Dist., Spark Plug & Coil Boot Insulation:  Extreme temp. silicone
Distributor Boot Type: 90 Degrees
Coil Boot Type: Straight
Spark Plug Boot Type: Straight
Distributor Cap Type: Standard / Female Post
Coil Type: Standard/ FeMale Post
Ignition Lead / Plug Wire fitment: Around valve cover
Lead Markers with easy to install tool: Included

 

 

 

 

 

 

 

 

 

 

</div>

 

We offer a 3 year, non-transferable warranty covering defects in materials and workmanship if properly installed. A 2 year warranty applies where the product is being used primarily in a racing application. If installation instructions have been followed and the product is found to be defective, Gear Campus will replace or arrange for repair if returned along with proof of purchase. This shall constitute the sole remedy of the purchaser and the sole liability of Gear Campus Pty Ltd to the extent permitted by law.

 

The foregoing is exclusive and in lieu of all other warranties or representations whether expressed or implied, including any implied warranty of merchantability or fitness. In no event shall Gear Campus Pty Ltd be liable for special or consequential damages. Products must be returned as originally supplied. Warranty is void if products have been modified or tampered with in any way or installation instructions are not followed.


Gear Campus is the "Go-To-Place" for highly innovative Automotive, Boating, Fishing and Cycling products. We search the globe for ground-breaking products that align well with our vision. We also pride ourselves on providing the very best customer service and look to engage our customers at every opportunity. 


If you can't find the product in our store please contact us via eBay Message.


Gear Campus is the authorised reseller for ICE Ignition, Australia’s leading manufacturer of performance automotive and boating ignition systems. The ICE Ignition product range includes 

  • Performance Ignition Systems for cars and boats using Digital Inductive Spark technology
  • Ignition Leads for cars and boats with inboard & outboard engines
  • Ignition Coils
  • Voltage Boosters


We are also the Australian Authorised Distributor for SeaSucker vacuum mounted products. The SeaSucker product range includes 

  • Bike Racks 
  • Roof Racks, 
  • Tablet Mounts
  • Rod Holders
  • Bait Boards
  • GPS & Fish Finder Mounts
  • Cup Holders
  • Storage Products
  • Dive Tank Holders
  • & More

All SeaSucker products use their patented industrial vacuum mount with up to 90 kg of holding power from a single vacuum mount.


We are the authorised reseller for RAM Mounts, Lee’s Tackle and Reel Colors fishing solutions.

If it uses gears or cogs chances are you will find a revolutionary product at Gear Campus to suit your needs.

 

We accept payment by any of the following methods:

 

  • PayPal
  • Funds Transfer (account details provided during checkout)

 

We ship our goods to Australia, New Zealand, Europe and the US.

  • Australia - We use Star Track Express to ship goods anywhere in Australia. We do accept Post Office Boxes as a valid shipping address although if selected we will send your goods using Australia Post with "Signature on Delivery"
  • New Zealand, Europe and the US - We use Australia Post International Express Post service with "Signature on Delivery".

 

Please also note that the shipping rates for many items we sell are weight-based. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full kilogram.

 

If you need to return an item, please contact us via eBay Message with your order number and details about the product you would like to return.


At Gear Campus, we stand behind our products as our goal is to have as many customers as true fans of our products and services.​​​​​​​


That’s why we offer our customers a "30 Day Money Back Guarantee" on the cost of the product only. If for any reason you are not completely satisfied with the product you can return it to us within 30 Days and receive a refund on the item cost only. This should give you peace of mind when shopping with us.


Please ensure all packaging is kept as we do require the goods to be returned in the same brand new condition as you received them. This includes all accessories and product manuals. Please ensure the product you are returning has not been damaged in any way during the time it was in your possession. Failure to return the product in its original packaging including accessories and manuals and/or product returns that are damaged, have visible marks or are soiled will incur a Restocking Fee. The Restocking Fee is a variable fee and is dependent upon the level of damage or missing items.


Please Note: Our "30 Day Money Back Guarantee" does not include the cost of postage in your initial order.

You should expect to receive your refund within a few weeks of giving your package to the return shipper; however, in many cases, you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (1 to 2 business days), and the time it takes your bank to process our refund request (5 to 10 business days). All refunds will be returned via the nominated payment method used upon the initial purchase. We will confirm via email when we have initiated the refund.


We will ask why you are returning the product however this is to help us better understand our customers and how we could improve our products and services. Furthermore, we will respond quickly with instructions on how to return items from your order.


The cost of returning the product is your cost. The goods will remain your responsibility during transit until such time that they arrive at the designated address provided by our staff. We accept no liability for any loss or damage that may occur during transit. 

DIGITAL INDUCTIVE
IGNITION KITS & MORE AT
Buy With Confidence ICE Ignition Experts
ICE Ignition PRO 100 9mm Leads - VL 3.0LTR/RB30DET w FEMALE Distributor & Coil

ICE Ignition Pro 100 Leads - Holden VL / RB30, FEMALE Dist & FEMALE Coil, Around The Valve Cover

The ICE Ignition 9HOL603 Pro 100 Ignition Leads will suit the Holden VL 3.0LTR / RB30 engine with:

  • Female Post Distributor FEMALE Post Distributor    FEMALE Post Coil
  •  Straight Sprk Plug Boot Straight Spark Plug Boot              fitment around the rocker cover Nissan RB30 fitment around cover

This lead set is made to suit the Holden VL / RB30 engines with FACTORY Distributor & Coil. A FEMALE Post Distributor and a FEMALE Post Coil was the factory configuration.

 

Please Note: This listing is only available with BLACK Ignition Leads and NO modifications are allowed including Lead Colour choice. This is due to the short processing time set on this listing and the additional cost required to manufacture custom ignition leads. Fortunately, we have the ICE Ignition 9HOL603-Custom Pro 100 Ignition Leads / Plug Wires on eBay  This listing allows for the following changes to the ICE Ignition 9HOL603-Custom Ignition Leads

  • Lead Colour Choice - BLACK, BLUE, or RED ignition leads
  • Distributor Boots & Terminals - MALE or FEMALE Boots & Terminals
  • Spark Plugs Boots & Terminals - 30 Deg, 45 Deg, 90 Deg, or STRAIGHT Spark Plugs Boots
  • Coil Boots and Terminals - MALE or FEMALE Boots & Terminals
  • Coil Lead Length - Alter the Coil Lead length to suit your Holden VL / RB30 engine

 

Why choose ICE Ignition Pro 100 9 mm Leads / Plug Wires?

  • More spark means a bigger explosion in the combustion chamber, this improves performance.
  • ICE Ignition leads / Plug Wires ensure this by minimizing resistance in the leads.
  • They are super-conductive with an ultra-low resistance of 100 ohms per metre. 
  • ICE Ignition Leads / Plug Wires are made from the high-quality ultra-low resistance spiral wound copper alloy core.
  • The alloy core is wrapped in ICE Ignition's proprietary insulation to provide maximum RF noise & heat shielding.
  • They are fitted with stainless steel "Snap Lock" fittings at the distributor and spark plug ends.
  • The boots are made from extreme-temperature silicone insulation and can withstand high temperatures.
  • The ICE Ignition 9HOL613 Ignition Leads / Plug Wires are a finished set of leads. Just plug them in and go!

 

WHAT'S IN THE BOX?
  • 6 x ICE Ignition 9HOL603 Ignition Leads
  • 1 x ICE Ignition 9HOL603 Coil Lead
  • Instruction Sheet
  • "ICE Ignition Plug Wires" Sticker

<div style="color:rgb(83, 83, 83);font-size:16px;font-style:normal;text-align:left;text-decoration:none;font-family:Open Sans">

Product Features & Benefits

The ICE Ignition Pro 100 Lead set features:

  • Spiral wound copper alloy core
  • Ultra-low resistance of 100 ohms per metre 
  • Delivers maximum spark and duration for improved performance.
  • Built-in Radio Frequency Interference (RFI) minimization.
  • All boots made from extreme temperature silicone to withstand high temperatures.
  • Premium "Snap Lock" stainless steel Spark Plug, Distributor Cap & Coil fittings. 
  • Numbered Lead Markers with easy to install tool to ensure correct lead fitment 
  • Ready to Install Lead Set. No cutting or terminating of leads required.
</div>

<div style="color:rgb(83, 83, 83);font-size:16px;font-style:normal;text-align:left;text-decoration:none;font-family:Open Sans">

ICE Ignition 9HOL603 Pro 100 Ignition Leads Holden VL 3.0LTR / RB30

Engine Type: Holden/RB30 3.0LTR 
Lead Diameter: 9 mm
Lead Resistance: 100 Ohms per metre
RFI Suppressive Leads: Yes
Lead Conductor:  Spiral wound copper alloy
Dist., Spark Plug & Coil Boot Insulation:  Extreme temp. silicone
Distributor Boot Type: 90 Degrees
Coil Boot Type: Straight
Spark Plug Boot Type: Straight
Distributor Cap Type: Standard / Female Post
Coil Type: Standard/ FeMale Post
Ignition Lead / Plug Wire fitment: Around valve cover
Lead Markers with easy to install tool: Included

 

 

 

 

 

 

 

 

 

 

</div>

 

We offer a 3 year, non-transferable warranty covering defects in materials and workmanship if properly installed. A 2 year warranty applies where the product is being used primarily in a racing application. If installation instructions have been followed and the product is found to be defective, Gear Campus will replace or arrange for repair if returned along with proof of purchase. This shall constitute the sole remedy of the purchaser and the sole liability of Gear Campus Pty Ltd to the extent permitted by law.

 

The foregoing is exclusive and in lieu of all other warranties or representations whether expressed or implied, including any implied warranty of merchantability or fitness. In no event shall Gear Campus Pty Ltd be liable for special or consequential damages. Products must be returned as originally supplied. Warranty is void if products have been modified or tampered with in any way or installation instructions are not followed.


Gear Campus is the "Go-To-Place" for highly innovative Automotive, Boating, Fishing and Cycling products. We search the globe for ground-breaking products that align well with our vision. We also pride ourselves on providing the very best customer service and look to engage our customers at every opportunity. 


If you can't find the product in our store please contact us via eBay Message.


Gear Campus is the authorised reseller for ICE Ignition, Australia’s leading manufacturer of performance automotive and boating ignition systems. The ICE Ignition product range includes 

  • Performance Ignition Systems for cars and boats using Digital Inductive Spark technology
  • Ignition Leads for cars and boats with inboard & outboard engines
  • Ignition Coils
  • Voltage Boosters


We are also the Australian Authorised Distributor for SeaSucker vacuum mounted products. The SeaSucker product range includes 

  • Bike Racks 
  • Roof Racks, 
  • Tablet Mounts
  • Rod Holders
  • Bait Boards
  • GPS & Fish Finder Mounts
  • Cup Holders
  • Storage Products
  • Dive Tank Holders
  • & More

All SeaSucker products use their patented industrial vacuum mount with up to 90 kg of holding power from a single vacuum mount.


We are the authorised reseller for RAM Mounts, Lee’s Tackle and Reel Colors fishing solutions.

If it uses gears or cogs chances are you will find a revolutionary product at Gear Campus to suit your needs.

 

We accept payment by any of the following methods:

 

  • PayPal
  • Funds Transfer (account details provided during checkout)

 

We ship our goods to Australia, New Zealand, Europe and the US.

  • Australia - We use Star Track Express to ship goods anywhere in Australia. We do accept Post Office Boxes as a valid shipping address although if selected we will send your goods using Australia Post with "Signature on Delivery"
  • New Zealand, Europe and the US - We use Australia Post International Express Post service with "Signature on Delivery".

 

Please also note that the shipping rates for many items we sell are weight-based. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full kilogram.

 

If you need to return an item, please contact us via eBay Message with your order number and details about the product you would like to return.


At Gear Campus, we stand behind our products as our goal is to have as many customers as true fans of our products and services.​​​​​​​


That’s why we offer our customers a "30 Day Money Back Guarantee" on the cost of the product only. If for any reason you are not completely satisfied with the product you can return it to us within 30 Days and receive a refund on the item cost only. This should give you peace of mind when shopping with us.


Please ensure all packaging is kept as we do require the goods to be returned in the same brand new condition as you received them. This includes all accessories and product manuals. Please ensure the product you are returning has not been damaged in any way during the time it was in your possession. Failure to return the product in its original packaging including accessories and manuals and/or product returns that are damaged, have visible marks or are soiled will incur a Restocking Fee. The Restocking Fee is a variable fee and is dependent upon the level of damage or missing items.


Please Note: Our "30 Day Money Back Guarantee" does not include the cost of postage in your initial order.

You should expect to receive your refund within a few weeks of giving your package to the return shipper; however, in many cases, you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (1 to 2 business days), and the time it takes your bank to process our refund request (5 to 10 business days). All refunds will be returned via the nominated payment method used upon the initial purchase. We will confirm via email when we have initiated the refund.


We will ask why you are returning the product however this is to help us better understand our customers and how we could improve our products and services. Furthermore, we will respond quickly with instructions on how to return items from your order.


The cost of returning the product is your cost. The goods will remain your responsibility during transit until such time that they arrive at the designated address provided by our staff. We accept no liability for any loss or damage that may occur during transit.