10A Solar Traffic Light Circuit Board Controller Warning Flashing Lamp Control
1: Wide range of applications
2: Small size
3: Simple to use
4: 4 lighting styles, flashing, always on, flashing
5: The solar end is equipped with MOS tube anti-backflow function, no need to connect an external anti-backflow secondary tube
High-power charging, charging current ≤ 10A;
High-power discharge, discharge current ≤ 10A;
Solar or non-solar can be used;
4 lighting styles, flashing always bright and flashing
Do not choose batteries, lithium iron lithium batteries and other batteries can be used;
You can choose light control or non-light control, and charge during the day when light control is used.
Automatically light up at night; the solar end is equipped with MOS tube anti-backflow function, no need to connect an anti-backflow secondary tube;
The micro-power consumption design of the circuit board itself, the micro-power consumption brings long battery life;
Circuit board size: 30mm*45mm.
1. Can be used in solar landscape lights, solar warning lights, solar street lights, solar strobe lights, solar street signs, solar guide signs, solar monitoring systems, etc.;
2. Use an adapter to replace the battery, and it can also be used in places that are not powered by solar energy.
The output voltage of the circuit board is approximately equal to the battery voltage. The circuit board does not have a lamp drive function. If the LED is directly connected to the output terminal, the LED lamp beads and the control board will be damaged.
S2 and S3 on the circuit board are the lighting pattern setting points. The circuit board has 4 brightness patterns, which are flashing, steady on, and strobe. The specific setting methods are as follows:
1. Flickering: S2 S3 open circuit is flickering, the default is open circuit state, that is to say, the default is flickering; (blinking for 100 milliseconds, pause for 900 milliseconds) flashing about 60 times a minute
2. Always on: S2 is shorted and S3 is open to be always on. This mode can be used when continuous power supply is required;
3. Strobe: S2 open circuit S3 short circuit is strobe mode;
4. To flash: S2 short-circuit S3 short-circuit flashing mode: flash about 60 times a minute
(Blink for 500ms and pause for 500s)
1. The open circuit of S1 on the circuit board is in the light control state, that is, it is charged during the day, and the light is automatically turned on at night. The default S1 is the open circuit state.
2. After S1 on the circuit board is short-circuited, it is in a non-light control state, that is, charging during the day, and lights up during the day and night.
Principle of light control: The circuit board determines the light intensity by judging the voltage of the solar panel, so there is no need to connect an external photosensitive sensor when using the light control function.
1*Solar Control Board
Domestic
We believe you need to get your purchases as quick as possible. As a general rule your item will be shipped within 24 hours of you purchasing it. We pack and post from Tuesday to Sunday (Mondays we are closed) but definitely get all our mail off to the post office first thing Monday morning for you. Mail gets picked up at 12pm so chances are if you buy before lunchtime your item will leave the same day.
International
Same as above but understand that depending on what part of the world you are from it does take a little longer to send, delivery can be from 7-15 working days. Also other factors to take into consideration are quarantine and customs regulations in your country. It is also a consideration that customs duties and GST/VAT may be payable at the buyers expense.
Combined Postage (for items with shipping charges):
We are more than happy to combine postage, just use the Buy it Now function in eBay (but DO NOT PAY after purchasing each item) to buy all the products you need, when you have finished request a combined invoice, we will base the shipping cost on the size, weight and your location.
* When you satisfied with our product and services please leave us positive feedback.
* If you have got the package, please confirm "Delivery on time" For us.
* If a problem occurs, contact us immediately with any email request.
* Just contact us using the " Ask the seller a question" link on eBay.
Your Satisfaction is our Priority. Our goal is to make all our customers as happy as possible while shopping with us.
For anything problem about product, price, shipping or order status, pleasecontact us via eBay message.Just contact us using the " Ask the seller a question" link on eBay.
We expect positive feedback and 5 scores DSR from you.
- We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
- If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund to you after the returned item arrived at our warehouse.
- Please include your eBay ID and item number with any email requests.