Waterproof
IP65 weather resistant waterproof. Sealed for any dust and water particle.
LED Wall Washer
LED
Wall Washer Light is a powerful fixture that will brighten, enhance,
and add visual interest to any room or situation providing uniform
indirect lighting to a specific or large area. Available in range of
single colours and DMX controllable RGB & RGBW.
Specification
- Material: Aluminium, PMMA Lens & Tempered Glass
- Wattage: 36W
- Beam Angle: 15x45°
- IP Rating: IP65
- Lifespan: 50,000Hrs
- Warranty: 2 Years
- Certifications: UKCA, CE & RoHS
DC24V LED Wall Washer (Single Colour/RGB DMX512/RGBW DMX512)
| Single Colour | RGB DMX512 | RGBW DMX512 | |
| Chips | Osram 36pcs 3030, 1W/LED | Osram 24pcs RGB 3-In-1 | Osram 24pcs RGBW 4-In-1 |
| Remote Control | No | DMX512 Remote Control Sold Separately | DMX512 Remote Control Sold Separately |
AC240V LED Wall Washer (RGB RF/RGBW RF)
| RGB RF | RGBW RF | |
| Chips | Osram 24pcs RGB 3-In-1 | Osram 24pcs RGBW 4-In-1 |
| Remote Control | 24 Keys RF Remote Control Included | 24 Keys RF Remote Control Included |
Features
|
|
|
|---|---|---|
Slim, Compact & WaterproofA stunning ultra-slim wall washer. Made from aluminium with PMMA Lens and tempered glass that is IP65 weather resistant waterproof. Can work perfectly in all weather conditions. | LinkableMultiple fixtures can be linked together to create a daisy chain series, which means that installation time and cost is reduced. | 15x45° Optic LensSpecial 15x45° beam angle optic lens, providing an amazing uniform colour wash effects. |
Power Supply (IP67 Waterproof)
| Output Voltage | 24V DC | 24V DC | 24V DC | 24V DC |
|---|---|---|---|---|
| Amp | 2.5A | 4.2A | 8.5A | 12.5A |
| Output Power | 60W | 100W | 200W | 300W |
| Input Voltage | 175-264V AC | 175-264V AC | 175-264V AC | 175-264V AC |
| Frequency | 50-60Hz | 50-60Hz | 50-60Hz | 50-60Hz |
| Max Load | 1pc 36W Wall Washer | 2pcs 36W Wall Washer | 4pcs 36W Wall Washer | 6pcs 36W Wall Washer |
| Dimension (L*W*H) | 205x40x28mm | 185x68x24mm | 240x65x37mm | 230x79x37mm |
| Warranty | 2 Years | 2 Years | 2 Years | 2 Years |
| Certificates | UKCA, CE & RoHS | UKCA, CE & RoHS | UKCA, CE & RoHS | UKCA, CE & RoHS |
Single Colour Wall Washer Wiring Diagram
DMX RGB/RGBW Wall Washer Wiring Diagram
Accessories
| Model | 2 Pins Extension Cable | 5 Pins Extension Cable | 5 Pins Lead Cable | T Shape Connector | Amplifier |
|---|---|---|---|---|---|
Function | For use with single colour wall washer only. Available in 2M, 5M or 10M. Use to extend gap between 2 lights or when there's a distance between the light and power supply is required. | For use with RGB/RGBW wall washer. Available in 2M, 5M or 10M. Use to extend gap between 2 lights or when there's a distance between the light and power supply is required. | For use with RGB/RGBW wall washer. Length: 1M. Required for connecting RGB and RGBW wall washer to our DMX controller. If use with other controllers, ensure controller is compatible with IC Type: UCS512DH. | For use with RGB/RGBW wall washer. Use when a power supply is needed to combat voltage drop. This is estimated every 6 units. | For use with RGB/RGBW wall washer. IP Rating: IP67 Use when an amplifier is required to boost signal strength. This is estimated at every 20 units interval. |
DMX512 Controller
Dimension: 192(L)x122(W)x45(H)mm
SD card is provided with each DMX controller with 39 preset programs. More can be added if familiar DMX coding/programming. If use with other controllers with our wall washer, ensure controller is compatible with IC Type: UCS512DH.
On initial use of DMX controller, it will require a quick reset, this allows the system to detect number of units in use. If this step is not taken, delays may be seen when a program is set.
AUTO
Press -
Material interface: switch to play all animations in full loop.
Parameter settings: select U** addressing, H** addressing, C** address
check, d/p built-in animation, quit.
SPEED
Press - Material interface: select speed. Parameter settings: confirm.
Long Press - Parameter settings: send out the address parameters.
MODE-
Press - Decreasing value.
Long Press - Rapid decline value.
MODE+
Press - Increasing value.
Long Press - Rapidly increase value.
MODE- & MODE+
Long Press - Into or quit the parameter settings.
SPEED & MODE-
Long Press - Send out the last address parameters.
Application
LED Wall Washers are perfect for feature lighting, providing an amazing colour wash effect to the signage, outside or inside of buildings. Each unit comes with two sturdy mounting brackets that allow for mounting on any flat surface, including ceilings, walls, and floors.
Note
It is advised, given the project, is to plan ahead and ensure you have all the appropriate accessories required for the installation. If you need help with the selection process or if you have a more complicated design, please feel free to contact us.
|
|
|
|
|---|---|---|---|
About UsG.W.S LED is a UK-based developer and manufacturer of LED lighting, offering a broad variety of LED products for lighting professionals as well as end users. Our products undergo a certified quality standards procedure to make sure we only stock items with the newest and most reliable technology. | PaymentOur preferred method would be Paypal but we can also accept all major credit/debit cards payment and direct bank transfers. If you use e-cheque on PayPal, delivery may take longer, as we will not be able to process your order until the e-cheque clears. We are a VAT registered company so a VAT receipt can be provided with your purchase. | ShippingItems will be shipped within 1-2 business days (Monday-Friday) following order completion. We offer Free UK Standard Delivery. However, if you simply can’t wait to get your hands on the product, we have Express Delivery option available for you. | ReturnsIf the items we sent to you is incorrect, or your items have arrived with a manufacturing defect, please contact us within 14 days where we will always offer you the choice of an exchange or refund. If you wish to return unused goods for refund or exchange, they must be returned with their original packaging within 30 days. We will only pay the postage price for any goods that need to be resent due to a fault on our behalf. |
