【USA Stock】

『USA』 CNC Servo Motor Nema34 12N.m Closed Loop 6A 86x156mm 2-Phase Hybrid Driver  for CNC Router Engraving Milling Machine

Good New:

We have USA Warehouse in United States,so we will ship this item from USA Warehouse to you.


Package-Included

Package include:

  • 1 x 86HSE156 Nema34 Closed Loop Servo Motor 12N.m 156mm 6A
  • 1 x 2HSS86 Servo driver AC24~70V or DC30~100V 6.0A
  • 1 x 3m extension wires
  • English user manual

Features

 

Nema34 12N.m Closed Loop Servo Stepper Motor & 2HSS86 Servo Driver CNC Kit

23

Nema34 Closed loop servo motor 12N.m 86x86x156mm

12n.m

Specifications

  • Size:86x86x156mm
  • Current :6.0A
  • Phase:2
  • Step Angle(degrees):1.8 degree
  • Lead wire:4pcs
  • Holding Torque:12N.m (1700oz-in)
  • Resistance:0.44±10%Ω
  • Inductance:3.7±20%mH
  • Insulation resistance:100MOhm(500V DC)
  • Insulation Class:B
s
s

Overview

  • This is the nema 34 series hybrid stepper servo kit. The 2HSS86 driver adopts new generation 32 bit DSP and vector control technology, which can avoid the stepper motor losing steps and ensure the accuracy of the motor.
  • The torque reducing is much lower than open loop stepper motor when it is at higher speed. The high speed performance and torque are enhanced in a great extent. Meanwhile the current control is based on the load, that can reduce the motor temperature rising effectively, then can extend the using life of the motor.
  • The build-in place in position and alarm output signal can help the upper monitor to monitor and control. The function of position ultra difference alarm can ensure the machine work safely. The closed loop system is an ideal improvement and a good replacement of open loop system,besides that,it also have some function of AC servo motors.

2HSS86 Driver

3

4

s

  • Voltage range: AC24-70V or DC30-100V
  • Peak current :Peak 8.0A
  • Logic input current:7-20mA
  • Frequency:0-200KHz
  • Suitable motor: 86HSE156, 86HSE118, 86HSE82
  • Encoder lines:1000
  • Insulation resistance:>=500MΩ
  • Operating temprature:0~50℃
  • Operating humidit:40~90%RH
  • Virbration:5.9m/s2Max

1.2.1 Stepper motor closed loop system, never lose step.

1.2.2 Improve motor output torque and working speed.

1.2.3 Automatic current adjustment based on load

1.2.4 Suitable for all mechanical load conditions (include low rigidity belt pulley and wheel), no need to adjust gain parameter.

1.2.5 Drive nema 34 series closed loop stepper motor.

1.2.6 Pulses response frequency can reach 200KHZ

1.2.7 16 kinds microsteps choice, highest 51200microsteps/rev.

  • Over-current,over-voltage and position ultra difference protection function.
  • Closed loop stepper system can be applied to all kinds small automatic equipment and instrument. Such as engraving machine, special industrial sewing machine, stripping machine, marking machine, cutting machine, graph plotter, cnc machine, automatic assembly equipment and so on

Wiring diagram

s

Shipping

·  Please open the package and check if there are some damages before sign, if there are some damages,please do not sign and contact us immediately 

·  We ship to worldwide but if your country’s custom is strict, please contact us before you bid to check detail and confirmed.

·  Please check out your address carefully when processing order.We are not responsible for wrong or undeliverable address.

Problem&Feedback

·  Please give us the opportunityto resolve any problem when you have,we concern your problem and we will try our best to resolve it.

·  If you are not satisfied, please contact us to resolve any issues. Please do NOT leave negative feedback without asking for help. We work hard to make sure EVERY CUSTOMER 100% satisfaction.

·  For any inquiries,issues or assistanceplease contact us via eBay message

Refund 

· When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos to us.

· Any reason required for all refund. Item must be in it's original condition and no physical damage. Buyer responsible for all shipping cost

Contact us

· Please feel free for any questions, all the emails will be replied within 1-2 business days,if you didn’t receive any mail, maybe it’s in the junk mail fold.

· We are online from Monday to Saturday.