Item |
Quantity |
Programmable Digital PID Temperature Controller Ramp and Soak with 50 Segments and SSR Output. |
1 |
A length-adjustable Kiln Thermocouple with 6 pcs Ceramic insulator + Ceramic Terminal/Mountung block + 1m Wire Extension. |
1 |
Solid State Relay (40A), 24-240V AC |
1 |
Heat Sink (80 x 50 x 50 mm) |
1 |
Available Segments |
Up to 50 segments available for a program |
Detective Temperature Range |
-200 to 1800 °C (depends on input type) |
Patterns |
Be able to program different patterns with different segments |
Input |
Thermocouple: (K,S,E,J,T,B,N) Linear Voltage and current:0-5V,1-5V,0-1V,0-100mV,0-20mV,0-60mV,0.2-1V(100-500mV),-20 -+20mV(0-10V) -5V- +5V(0-50V), -100 - +100mV(2-10V) |
Output |
Voltage pulse to drive SSR |
Control action |
Heating |
Response time |
Less than 0.5S (configurable) |
Accuracy |
0.2%FS+- 0.1C(Cu50 cooper resistor compensation or ice point compensation) |
Temperature drift |
Less than 0.01%FS 0C (Typical value is 50ppm/0C) |
Resolution |
10C or 0.10C(automatically change to 10C when the temperature is higher than 999) |
Display |
Dual line - four digit - LED display |
Decimal points |
Configurable for all inputs |
Control Method |
ON/OFF AI MPT with auto tuning, adopting fuzzy logic PID algorithm |
Auto/Manual Control |
Auto/manual bump less transfer from front panel |
Auto-tuning |
Auto-tuning and manual tuning available |
Alarm Mode |
Absolute value high limit, Absolute value low limit, Deviation high limit alarm, Deviation low limit alarm. |
Alarm stand by |
In some occasions, for example, in the heating process, when the alarm is set to as low deviation alarm, right after the power is turned on, the alarm will be triggered but there is no problem in the system, the alarm block function can solve this problem. |
Soft start function |
In some particular application, 100% output ratio is not allowed when the power just turned on; soft start function is a great feature to solve this problem. |
SV re-transmission output |
available, as feed of PLC or indicator or paperless recorder |
Power Supply |
90~260VAC |
Dimension (DIN 1/8) |
96mm*48mm (Horizontal) |
Mounting |
Panel Mount |
1) A Ceramic Mounting Block.2) 1m (3.3 ft) wire extension with a Flat Pin (Miniature) connector at the end.
- Its Flat Pin connector can be connected dierectly to Digital Thermometers.
- By removing its Flat Pin, it can also be connected to Temperature Controllers.
Thermocouple |
Type K |
Measuring Temperature |
-58 to 2372 °F (-50 to 1300 °C) |
Gauge |
11 |
Thread material |
Cr-Ni, Si-Ni |
Thread diameter (ɸ) |
3.2 mm (~0.13 inch) |
Thread length |
190 mm (~7.5 inch) |
Tube length |
~150 mm (~ 6.0 inch) |
Tube diameter (ɸ) |
Oval shape: L=12.3 mm & W=10mm (L~ 0.5” & W~ 0.4”) |
Tube shape |
6 x (1 inch Pcs) Ceramic Tube |
Insulator |
Two-hole insulator |
Load voltage |
24 - 240V AC |
Load current |
40A |
Control voltage |
3-32V DC |
Control current |
6-25 mA |
Size |
3” x 2” x 2” (80 x 50 x 50 mm) |
Weight |
0.22 lb (98 gr) |